EdgewaterWW Posted April 8, 2014 Report Posted April 8, 2014 I got a old hand saw (can't find a place to plug in a cord, haha) from a friend it was his Dad's, the Dad was a woodworker in the 60's-80's. Writing on the saw is "Henry Disston and Son Keystone Saw Works" and some more I will start cleaning it soon. The blade is 26" long and width of blade, 4" under back. What is this saw best used for? (only miter-box)? Quote
Dan S Posted April 8, 2014 Report Posted April 8, 2014 Because of the back you can really only use it a miter box. Technically you could use it like a Tenon saw, but it's pretty big for that. Quote
Eric. Posted April 8, 2014 Report Posted April 8, 2014 You could use it to cut the tenon on the split-top Roubo! Have to admit, that was the biggest tenon I've ever cut. Quote
Skunkeye Posted April 9, 2014 Report Posted April 9, 2014 Could always cut 10 inches off the front end and make a more manageable tenon saw out of it. Might get a couple of card scrapers out of the scrapped saw plate. Quote
wtnhighlander Posted April 10, 2014 Report Posted April 10, 2014 I have one that looks like that, but is 6" under the back. Can't find a good use for it anywhere... Quote
derekcohen Posted April 10, 2014 Report Posted April 10, 2014 While that saw is intended for a mitrebox, probably the Stanley #346, it is also useful for sliding dovetails and dados. With a fence you can do this ... Full article here: http://www.inthewoodshop.com/Furniture/SlidingDovetailsbyhand1.html Regards from Perth Derek Quote
mkirby Posted April 10, 2014 Report Posted April 10, 2014 you could always do this with it https://www.youtube.com/watch?v=3qwI3jOyg4w Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.