Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

which of these big routers...

Featured Replies

  • Author

The 17 pounds on the PC sounds a bit intimidating. Maybe I need to start working out.

  • Replies 62
  • Views 13.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • wdwerker
    wdwerker

    Get a scrap of plexi, and make a baseplate yourself ! If you need a large hole a holesaw on the drill press will do the job. I use 3/8 plexi. If you can find a supplier or fabricator they usually sel

  • If you can use a wing cutter to cut the mortice on both pieces you only have one set up to do. Mill up a batch short grain tenon stock to glue into the ends of the tables.

  • wtnhighlander
    wtnhighlander

    Just be sure that the grain of the spline runs the same direction as if it were an integral tongue. Correctly oriented and assuming the fit isn't excessively loose, it should be just as strong as an i

It has some heft to swing it up onto the tabletop you are going to cut, but once it was there it is a joy to use. Soft start reduces the jerk when it's powered up. As you feed it into the wood you hear the motor power increase when it starts cutting. If you run into harder grain the motor pours on the power to maintain the same speed and when it gets to softer grain it backs down.

Unlike smaller routers that you can feel some resistance and you have to push them this PC just does the work and you guide it along.

If you are using a big router with a big winged cutter wear a face shield ! Chips fly quite a distance.

That's what I was talking about, but didn't say.  I wish all my big routers were 7518s, except for the big Makita good plunge router, and the 7539 workhorse plunge router.  I could do without all the others, except for a few 690s.

  • Author

So...Rockler just informed me that the PC 7538 got recalled due to people getting shocked. Anybody hear about this?

Surprised no one's suggested the Festool OF2200

 

It's pretty much the Big Daddy of the big-daddy routers. And you can accessorize out the ying-yang.

Nah, step up and get a PC 7518 . I have one of its predecessors which is over 20 years old and still runs great ! The 7518 in my router table is just as powerful and one of those purchases that lives up to everything you expect of it. How often do you run into that sort of quality?

My Delta UniSaw is almost 30 years old and I need to replace the 3 belt set again for the second time after it getting daily commercial use. Only thing I have replaced on the original PC big router is a collet that I damaged.

  • Author

I'm a little concerned with not having the ability to plunge. The only thing I can think of is for mortises where a HCM wouldn't be best. I'm sure there are many other instances. But how critical would that be?

My advice is go straight to a shaper. Doing 10 at a time etc is a killer to a router and the cutters aren't cheap and don't last long. A shaper compared to a router is like a chainsaw to a axe. The cutting tools are a little higher upfront but run better and longer and never burn up. A 1 1/4" spindle shaper with a feeder will amaze you! Routers are for hobbiest and that's fine. If you are trying to make money skip a pouter table.

Steve

  • Author

My advice is go straight to a shaper. Doing 10 at a time etc is a killer to a router and the cutters aren't cheap and don't last long. A shaper compared to a router is like a chainsaw to a axe. The cutting tools are a little higher upfront but run better and longer and never burn up. A 1 1/4" spindle shaper with a feeder will amaze you! Routers are for hobbiest and that's fine. If you are trying to make money skip a pouter table.

Steve

So this is where I find myself constantly.  The woodshop I work in is not a regular business woodshop.  It is a non-profit.  It only exists to make products to sell so we are sustainable, and to provide a training/employment environment for people who are normally unhirable.  In short, our budget is generally small.  So the balance I am in is this: Is there a way to baby step to make some products more viable so that we can afford a better tool later, or is it worth it to take a large chunk of the ministry's money to spend on a large/high-end tool now.  Up until now, we've either been buying super cheap or getting decent stuff donated.  We got a unisaw donated, and it changed our whole shop.  We bought a Grizzly G0555P a while back, after killing two crappy, used, benchtop bandsaws.

 

So anyway, everyone's input is priceless to me, so thanks all for the time and advice.  Don't know if it makes things much easier in the end, because it's like "Do I get a domino, or a shaper, or a router?  What's best for now?  Does that matter, and should I just look at what's best 2-3 years from now?"  The guy at rockler recommended a Festool sander, and I laughed, but he's like "It will last you a long time in a production environment, and hooked up to the dust collection, creates no dust".  Which obviously sounds great, but do I try to do that now, or keep pushin on with crap sanders a while longer?

 

So could you recommend a site or video of a couple decent shapers with feeders, or whatever it is you were suggesting?  Thanks.

Festool is the bomb. I was going through 2-3 top end angle sanders a year before buying a ro150. Just had one go down now 7 yrs later. Don't think expense. Think investment. To a point at least.

Shapers are safer too. Except for doing idiotic things (don't ask). Then they aren't. Lol

Steve

Buy an old powermatic 27. New belts and bearings will usually have it good as new. Motors generally last a long time but would still be cheap. I've sold 2 feeders on eBay for about 4-500$. Get a 4 wheeler if you can a big heavy one.

Steve

  • Author

Buy an old powermatic 27. New belts and bearings will usually have it good as new. Motors generally last a long time but would still be cheap. I've sold 2 feeders on eBay for about 4-500$. Get a 4 wheeler if you can a big heavy one.

Steve

Translate please.

BTW, I think I have decided for now to go with a big router. Here is my reasoning:

1. Routers are versatile. I don't feel, at this point anyway, comfortable with the idea of a shop without a router. They can do edges and engraving, which I think would be hard with a shaper, and also joinery. Even if I end up getting another machine that can accomplish those things, I think it would be handy to have a backup machine in case work backs up or something goes wrong.

2. We can afford it now. Right now, we have a pretty real opportunity to make some reclaimed wood commercial tabletops for a restaurant/hotel supply company. This is the cheapest, fastest way to engage this opportunity.

3. We also make products out of laminate countertop sink cutouts, mostly kids' furniture. To cut the pieces out, we use a template and a pattern/trim bit on a router. This is incredibly hard on our cheapo router. This product is also picking up. Could we make these with a shaper? Probably...but again, being able to step it up now for less might be good. So to sum up...because we make other products that a router would be very useful for.

4. I am incredibly unfamiliar with the other tools I'm considering (shaper and domino). I've only been woodworking for about 4 years, and that by building this shop up from nothing - no tools or knowledge.

I am certainly still in need of info on these other options. We will be (most likely) moving, expanding, and upgrading our shop in about a year, so I need to get educated about these other avenues of production.

I've got both the 7518 and the 2200. They are both great products, but they are very different animals. The 7518 is a dynamite product. With the production base, it's an excellent example of KISS design/execution. On the other hand, the 2200 is an engineering marvel and has just about every bell/whistle you could want. It's heavy and powerful -- not to mention, expensive... The one thing about the 2200 -- it's DC is phenomenal and the only router I've used that could actually be said to have real DC... On a big jib, that's a big plus... There have been times when I emerged from the shop looking like a sawdust snowman... With the 2200, those days are long over.

I have a Shelix flush trim head with bearing on a shaper that can pattern route 2" thick oak at virtually unlimited amount of trim cut. Butter smooth no loud whining or burning or tear out. But yes I have routers too I run them in hand for the most part. Keep a nice shaper on your wish list. You will never use a table router again after you get used to it.

Steve

  • Author

Don't know if I'm able to express how thankful I am for everyone's input. Most of the time I feel like I endlessly beat dead horses on here. I take everything into consideration (and likely over-consider). And my "wishlist" is most likely very different from what we will get, or even from what we need. But we have certainly been considering a shaper for a while. So that will probably be the next thing I try to educate myself on.

My advice is go straight to a shaper. Doing 10 at a time etc is a killer to a router and the cutters aren't cheap and don't last long. A shaper compared to a router is like a chainsaw to a axe. The cutting tools are a little higher upfront but run better and longer and never burn up. A 1 1/4" spindle shaper with a feeder will amaze you! Routers are for hobbiest and that's fine. If you are trying to make money skip a pouter table.

Steve

Channeling Particle Board today?

  • Author

Thought I would share this with you all. I've narrowed down my choice to either a Porter-Cable 7539 or a Bosch 1619EVS (pretty much identical in features). Trying to find them locally, so tried calling a Sears after finding that Rockler, Woodcraft, Lowe's, and Home Depot do not carry them in store. Here is my conversation with the Sears operator:

Sears service person: hi, blah blah, how can I help you?

Me: i want to talk with the power tool department.

Sears: i can help you.

Me: okay, i want to know if you sell a router and how much it is. It's a Porter-Cable, and the model number is 7539.

Sears: it's a what? Porter...Cable...

Me: Porter-Cable router, model 7539.

Sears: Okay...is it like a box, with a table coming out?

Me: No. It's a Porter-Cable Router, model 7539.

Sears: Exactly how much do one of those cost?

Me: I don't know. That's why I'm calling. (I then hang up in disbelief).

This person is getting paid. Sad.

In other news, I found out that the Porter-Cable router that DID get recalled was the 7518 because something in it wasn't grounded and people were getting shocked by the handles. I believe the Rockler manager said this just happened yesterday.

Now that's funny!

 

I'm a little surprised that your Lowes doesn't carry that Bosch router in store.  I know my local one does.

 

Grizzly carries the PC router as well.

I have bought many tools from CPO. They have refurbished and new tools, this is a link to the new one.

http://www.cpooutlets.com/porter-cable-7539-speedmatic-3-1-4-peak-hp-five-speed-plunge-router/pcbn7539,default,pd.html?start=18&q=porter%20cable%20routers

They ship fast and I have had great luck with refurbished tools. They go through quality control and get anything wrong fixed, most of the time it is just an opened box tool that was returned for whatever reason.

I have three refurb 7518s from cpo.  I couldn't tell the difference between any of them and new.  People probably bought them, got scared when they opened the boxes, and returned them somewhere.

 

  If I'm remembering correctly, I bought the 7539 in 1991.  It has done a LOT of work, worn out I forget how many collets, and still mills stuff perfectly used in one of my router tops.

  • Author

Ok, so had my first disappointment with the router. The subbase that came with it had an opening that was too small for the bit I needed to use (for doing the mortises in the commercial tabletops; the whole reason I got the router). And of course, no one carries the right one. So back to Amazon I go.

I tried plunging it down first and then inserting the bit, but I couldn't access the collet. I tried removing the subbase, but the router wouldn't slide across the wood.

It's so annoying because I did a lot of research and bugged all you guys, but neglected to find out that detail. But also frustrating that a $350 router didn't include any accessories.

So yes, I should have paid more attention to the details. But I do wish some stores would carry some of this stuff. Don't know if it's a Porter-Cable thing, or what.

Get a scrap of plexi, and make a baseplate yourself ! If you need a large hole a holesaw on the drill press will do the job. I use 3/8 plexi.

If you can find a supplier or fabricator they usually sell scraps pretty cheap. Old plexi with the paper on it can take mineral spirits and a lot of rubbing to get off.

Another material that works is UMHW plastic or scraps of Corian and similar countertop materials. I have mounted the original baseplate to the new material with double face tape. Carefully mark and drill the screw holes and center hole.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.