Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bench/tool placement

Featured Replies

Question for those with nice shops: where should the tool racks go with respect to the workbench? On the opposite side from you (bench against wall, you reach over it to get a tool) or behind you (bench out from wall, you turn around to get a tool)?

Sent from my iPhone using Tapatalk

I think every shop layout is going to be a little different.  Some benches are against a wall, some are in the middle of the room.  Some benches have drawers, some have shelves, some have cupboards..

 

For me, I like drawers in my bench.  The most frequently used tools go in those drawers.  The rest of the tools have homes in my shop based on frequency of use.  Something I use rarely will be at the other end of my shop somewhere but, my layout tools are in the drawer in my bench.

I like having everything in front of me. Most used tools go on hanging board, second most used tools go in drawers.

 

I have seen this mentioned a few times by different professionsals/hobbiests. In a perfect world, the further the tool is away from you the less it should be used.

My hand tools are on a hanging shelf that is to the left of my bench and high enough that I can just reach the top of to put stuff up there. This is good because it is out of the way and I can put other stuff under it if I want to. 

Has anyone ever had problems with UV fading tools hanging tools in the window?  The only window I have gets really hot direct sunlight in the afternoons.  I have always been hesitant to hang my tools there for that reason.  Currently my bench is away from the wall so I can walk around it, but may have to change that in the future.  My tools are right beside my bench for easy access.  

I would assume that would be an issue in your case. The two windows in my shop are blocked by trees when the sun rises, and the rest of the day the sun is away from them.

I have some plexiglass on the inside over my glass windows that acts like double glazing. It is coated with an anti UV coating and is called Plexiglass UV 100.

  • Popular Post

Bench placement is all about personal preference and compromise... For the vast majority, it's governed by available floor space, wall space, placement of other shop tools, etc, etc.... In other words, it's all about getting the best compromise for your workflow...

 

Now, If I had a purpose-made outbuilding for a shop, my 'ideal' bench placement would go something like this:

 

About four feet from a wall lined with hand tool racking. There would be at least eight feet clear space on the other three sides surrounding the bench. I'll term this 400sqft space, 'Hand-Tool-Heaven'... The adjacent and opposite wall would have large windows (or full glass) providing natural daylight to our most blessed space. The ceiling would be at least ten feet and have a 3ft clear-story. The floor would be T&G hardwood with radiant heating. There would be at least one floor sweep. Electric would be available both overhead and via outlets mounted to the bench's stretchers. In one opposing corner would be a dedicated sharpening station with available water and sink. The opposing corner would have a stand-alone Moxon joinery station...

 

The placement of the refrigerator, microwave, bathroom, flat screen TV, WiFi repeater, DVD player, stereo and recliner will be left to the imagination...

 

Unfortunately, Hand-Tool-Heaven is only reached by few... For the rest of us, it's a slightly warmer reception: our bench is placed under the stairway leading up from the dank, dim, mildew/critter infested basement... :)

Personally, I hate leaning across the bench to get tools.  Particularly if I have anything sitting on it.  So I'm a fan of putting the cabinet behind me or to the side rather than before me.  Means I twist and turn, but I'd rather have that than knock something off the bench that can't handle the fall.

I keep my bench out from the walls and my tool wall is actually at the end of the bench and I really like that set up. I've had a bench up against a wall and I just found that it was harder to reach tools that were higher up and then if I had an assembled piece on the bench I was always moving it to get at the tools I wanted. Having the tools at the end of the bench is nice because you can quickly turn your head to see if your tool is there without having to turn completely around and then it is just a quick shuffle to go get it. I have a smaller shop and this set up does take up a lot of room be it works well for me.

  • Author

Thanks to all (and hopefully

more) ; this is exactly the sort of experience-based responses I was hoping for. I'm not sure when I'll get my shop building but it will almost certainly be this summer so I'll need to decide on all this pretty soon.

It might also be a good time for be to build a new bench top.

Sent from my iPhone using Tapatalk

I am with you on that one. Gotta move a car every time I work. But at least in that case I can have a ton of square footage to work when the large hunk of metal is out  :)

  • Author

I've been in the move-a-car mode my entire adult life which is about 30 years. To move beyond it is almost to great to imagine.

Sent from my iPhone using Tapatalk

people keep cars in garages? What a waste of good garage space. When I owned a car I never had a garage. Now I own a garage I don't have a car. If I ever decide I need a car again I have a driveway for that.

 

but back on topic ... I keep my workbench against a wall with 6ftx4t of pegboard on the wall above the bench for tools. Its really good use of the wall space there, and keeps the tools super handy. In reality only the bottom half of the peg board is that useful since I can't reach the top, so that is where I keep tools that I seldom use. My planes are on shelves to one side (again reaching the top shelf isn't easy).

 

One problem I had keeping the bench against the wall was that once when chopping mortices the vibration went into the wall and slowly but surely my #5 plane bounced to the edge of its shelf and fell off. Fortunately it landed in the bin of shavings not the floor. I have since banged some nails into the shelf lip to stop planes walking off.

post-4067-0-24421600-1399312053_thumb.jp

I used to have the car in the garage but since my shop was rebuilt the car has remained outside. There is space should I need to bring it into the shop but I'd rather use the space for woodworking.

Those in the more temperate regions that have to deal with solid precipitation forms tend to view the garage as a necessity.  (Despite the freeze/thaw argument, anyway.)  These same folks are usually the first ones to toss their car into the cold full time.  (The spouse's car is sometimes gently placed outside, sometimes casually moved before anybody notices.)

 

Those who don't have months of solid water falling don't view the garage with the same eyes... they have other concerns. 

 

In reality, I can deal with having the car under a car port while the garage remains the province of the shop.  (or is that the shop remains the province of the garage...)  I'm ok if the car is outside.  As long as the wood isn't.  Since I've got to move both wood and tools out to be able to stand inside my shop, the first item on my dream list for a larger shop is wood storage, followed by bench space.  In that end, I'm fairly ambivalent.  I've got one photo of my bench out of it's usual location,and I liked it there enough to say that's where the temporary bench would go.  (Temporary in the sense that it's going to have to be put away every time i'm done with it...)  It allows for access on two sides only, but that's worked so far for me.

  • Author

Precipitation in the form of solid water to me means hail and that's the biggest reason I keep the cars inside. Only once have I had the hell beaten out of a car but that was enough. It's also nice to not have to scrape frost off the windshield. But we all make choices - to each his own.

I'm actively planning tool racks for everything. I'm getting excited.

Sent from my iPhone using Tapatalk

I wouldn't spend too much time planning it.  Just put your tools where it seems to make sense at the moment and expect to change your mind and move things around at least a half dozen times.  My shop is constantly in flux.  Eventually everything seems to find a logical and permanent home...after living in several other places first.

 

I do definitely recommend keeping your bench away from the wall though...access to all four sides.  I tried it against the wall for a few months.  Hated it.  Moved it.  Ah, much better.  I'm constantly moving to the back side of my bench to do something.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.