Recommended Posts

Posted

HEllo I'm looking for a small bandsaw that can cut some hardwoods with out issues..  I don't have much space so it will have to be a desktop .. any pro's or con's advice for a brand to look at and the ones to run from.. 

 Thanks 

 G

Posted

I don't have any direct experience with small bandsaws except an incredibly cheap Ryobi years ago (pure junk), but this may be the type of thing where Craigslist could be a good source. I am always looking, just for fun, and while I have yet to find some smoking deal on a Laguna, Walker Turner 16...i, there are ALWAYS small bandsaws for sale. Some look pretty bad, but others look clean and well taken care of. 

 

However... I once thought I needed a table top drill press for space, but found it actually wasted more space than a floor unit. Bench/table top space is in many ways more valuable than floor space in a shop. Are you really sure this is the best option? The small saws you will find will all be lesser quality. You know your needs better than anyone, but there are a lot of cons and few if any pros other than space.

Posted

If I were you (actually, I was you at one time) I would search Craig's List, eBay, and anywhere else I could think of (Yahoo has a user forum) and look for an old Inca 10 inch...

Posted

I don't have a work bench I'm been using the back porch at this house.. I have seen some full size ones and then I would have to figure out a way to keep bugs and water out of it besides a tarp

Posted

I have a 10" Craftsman that works great, but is too small for what I want to use it for ( resawing ). If you happen to live anywhere near Jackson, TN I can make you a deal. Otherwise, I can recommend the model as a solid performer in the benchtop lineup.

Posted

You say you want a saw that can cut hardwoods "without issues," and in the same breath you say you want a "desktop" (you mean bench top).  Kind of a contradiction there.  I'd look into 14" saws and figure out a place to put it.  Don't waste your money on the little ones unless you're only planning to scroll cut with it.

Posted

With good blades, I've resawn 4 inch teak and 5 inch cherry on this thing.  It has a limit of about 5 and a half inches before the guides run out of travel room.  I haven't tried larger teak yet.  I haven't tried maple.  This little guy will surprise you (BTW, not my shop, but my saw is just like this...):

inca340onstand.jpg

Posted

I have a good friend that has a 10" craftsman, which is a clone of the 10" rikon.  It is a solid band saw.  Put a good blade on it, and you should be happy with it.

Posted

Sorry for my mis use of a term since I've been deskbound last few years I tend to use that term a lot.. I have done some digging on the web for a good used one..I figure if I can find a good deal on a used full size one I will pull the trigger.. just sealing it up when it's not in use will be the trick.. maybe just a HF tarp and some straps might do it..  TY for all the advice..

 Gary

Posted

Highland Woodworking in Atlanta has been promoting a 10" Rikon benchtop for $200 on their newsletter and website for awhile now.  They've got a strong online presence and are a sponsor of Matt's Basement Workshop.  They also offer one of the better resaw blades (in my opinion) for bandsaws.

 

I tend to agree with those who feel a full size bandsaw is a better tool but I also understand space constraints and if a benchtop unit is what you feel you have room for then this offer on a brand new saw is pretty reasonable.

 

You might be able to copy & paste the following link:

 

http://www.highlandwoodworking.com/rikon10bandsaw.aspx?utm_source=iContact&utm_medium=email&utm_campaign=Wood%20News&utm_content=june+14+wood+news+subject+A

Posted

I have been watching band saw boxes, reindeer, giraffes, hippos, cows, birds, ad nauseum trying to think about how to enter that game without breaking the bank. I am so inexperienced with some tools having only used what was available. I never considered bench top. Thanks all for what you have posted here. Byrdie, unlike some sites, your hotlink goes straight to the saw.

  • Like 1
Posted
Hi,  what's your preferable price range? I suggest you look on 9" or 10"benchtop saw. Cutting woods on these
sizes of band saw will never be a problem , you can cut curves smoothly. However, resawing will pretty hard.
 
 
Actually, it's better to get 14" band saw, it will not take too much space. Try to check CL or ebay. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 44 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined