Recommended Posts

Posted

The top is fantastic. Heck, the whole thing is fantastic! Lining the inside w/ sapele is a good idea. I have always just cut a groove in the sides and glued a ledge for the tray to slide on. I like your idea much better. Great job

  • Like 1
Posted

Very nicely crafted, and a great gift!

 

Terry, I've never used quadrant hinges and would love to know what technique you used for making the mortises? They came out nice and clean!

HI Janello. There are many ways to make the mortises. Brusso sell a routing template but that is quite expensive if you are doing a few. You can also make your own shop made template using a few scraps of plywood. You can use chisels but cutting the radii is difficult. What I did was use a combination of a Dremel in a router base to hog out the waste, chisels to straighten up to my knife line and then used the Dremel to carefully shape the radii. You do need good eyesight for that so I use magnifying goggles. As I was only doing 4 mortises that was the easiest and quickest thing for me as I already have the equipment. When drilling the pilot holes for the screws either use a Vix bit or drill the holes centred towards the mortise (the radius). That way when you screw in the countersink screws the hinge pulls into the mortise.

If I was batching these out I would definitely buy the Brusso routing template, a 5/16" router bit and use a regular router.

 

One thing that you have to do is cut sufficient clearance slots for the quadrant to go - both into the carcass and the lid. Also when you fit the quadrant the ends are slightly different. The captive end needs to go into the lid. If you get it the other way around the quadrant falls out when you open the lid.  

 

I got my magnifying goggles here and Dremel base here from StewMac.

Posted

Thanks Terry, that's some useful information. I had used standard rail hinges on my last box project because I chickened out cutting those quadrants! :ph34r:

 

At the time It got me thinking, it would be nice if there was a tool designed for this, similar to a domino cutter. Albeit, it would probably be to expensive for a one-off task that's uncommon. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 55 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined