Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Loaded question- is the kapex worth the price?

Featured Replies

Seriously considering this tool for my shrinking shop. I love my domino, and may add a kapex to my shop. Just looking for honest opinions from current or previous users.

In canada, the kapex goes for 1600.00, which is a large price tag. I will def push it up against a wall, so I like the static rails idea.

I don't currently own one Pug but, it's on my short list..

It's a great saw I played with it for the longest time and in the end I went with a DeWALT 12 inch slider the same one Scott Phillips and Tommy McDonald use it was only 600 dollars and suited my large capacity need since I cut a lot of bench tops if I made things that fit the kapex I would have went that way

Sent from my SCH-i705 using Tapatalk

Currently own two SCMS saws (Makita, Kapex), had two DeWalts several years ago... A friend of mine is a trim carpenter and uses the new 10" Bosch -- I've played with that a few times...

 

Is the Kapex worth the price? Maybe a better question: is the Kapex worth the $600 over the Bosch? I'd have to say no... Don't get me wrong, the Kapex is a good saw, but $1400 good? No... Prior to the price hikes, the Kapex was about $400 over the Bosch and the question was harder to answer -- but not at $600... For the price of a Kapex, you could get the Bosch and three Forrest Signature Series blades with $$ to spare...

 

On an absolute basis, is the Kapex a better saw than the Glide? Yea, it's DC is better -- a lot better (if that's important to you)...  It's also lighter and less bulky. The Kapex controls lock-in a little better, and there is just a tad bit less play... etc. Both saws are quite accurate and smooth functioning... After using my Kapex, my friend with the Bosch got a Kapex setup for renovation work -- he's the kind of guy who cleans-up every day on renovation gigs -- so the Kapex is a time-saver in that regard -- it's also easier to get getup on a job site... He uses the Bosch for new construction and/or let's his helper use it in the driveway on renovations...

I do not regret my Kapex and it's true that when it comes to dust collection, the other saw's best is Kapex's worst. However, you will need the larger hose for optimal DC, but keep in mind you're not limited to Festool hoses in that regard (Bosch makes a compatible large hose, VAC-05 IIRC).

 

As far as backing up against the wall, that is a big plus for Kapex, but these days there are other saws which do that too, so it's less of a bullet point now than it was a few years ago. If you're planning on moving the saw around a lot, that's another plus for the Kapex, though I would NOT consider it a beater saw by any means. I'd say the Kapex is made more for the interior worker wanting to keep houses as clean as possible, rather than the construction worker tossing things around in the back of a truck.

 

Probably the biggest negative to the saw - aside from price - is that I think the crown stops should absolutely be included with the saw for that price - and they are $100 a pop at that. Though there are third-party versions that add a t-stop for much cheaper.

 

Otherwise I warn that if you do go for the saw, make sure it absolutely passes a QA lookover and that you're not anything less than thrilled with it. I bought a Kapex long ago and returned it as it's base would flex when moving the saw in, and I was able to replicate it on a Woodcraft unit to the astonishment of the employees. Unfortunately I looked hard at other saws like Hitachi and Bosch and never found another one that fit all the criteria of what I wanted, and after speaking my concerns to a Festool rep, I gave it another chance and that saw has been very dependable and very solid.

It's the most accurate saw that sits tight to a wall, and that's what I needed.  If I had more space and didn't need the forward rails I may have considered another saw...I played with the Bosch a little and it seemed nice but there was definitely more slop than the Kapex, although I never actually made a cut with it.  My buddy has a Dewalt 12" slider and it doesn't even get close to good enough for anything except construction use.

 

I think if you're wanting to make furniture-quality cuts with a SCMS, the Kapex is the best available for that.  If you're a finish carpenter it's a no-brainer.  But if you're just wanting a chopper to hack down rough material or construction sticks, it doesn't make much sense.  I have zero regret about the Kapex purchase in consideration of my specific needs...space constraints and the desire for high cut-quality.  Yeah the price tag sucks.  I held my nose and plunked it down.  IMO it's the best saw in its class and comes with the price to fit that position.

  • Author

Good advice guys, thanks. I have a bosch 10" now, and I like it a lot. It's just too big to fit into the new shop, so it will be for general construction.

I will have a chance to get my hands on the kapex tomorrow, so I'll get a really first hand experience with it.

I just got my bosch gcm12sd back from repair. The spindle bearing was bad from day one out of the factory. I have not made a cut with it yet, but turning on the saw indicated the problem was fixed since the rotational noise that always existed is now gone. I will report back when i have results to share.

"Loaded Question: Is the Kapex worth the price?"

 

If you ask me(and you did in a roundabout way): No. Not just no, Hell no!

 

It's a chopsaw. Yes, it doesn't take up a lot of space behind for the rails and the dust collection is a lot better than the rest but don't expect to do trim in a finished home without making a mess. It's hard to square up and easy to knock out. The blades are expensive and the latest versions can only be sharpened by a very few sharpening shops(as hhh found out).

 

Go over to the FOG , hit "Search" and enter "Kapex". Choose "Search for Topics Only" and then "Choose a Board" and "Festool Tool Problems". Twenty threads this year alone, 180 threads total, most having to do with alignment, blade guard issues and most recently(like in the last year or so), motors smoking and tables not being parallel.

 

So would I recommend you drop $1600 on a chopsaw? Only if I didn't like you. ;)

 

Yes, I own one. Yes, it sits in a stand with a dedicated CT Midi(latest version that pulls 137 cfm or whatever). Yes, it's connected to the vac with a short 36mm hose. Yes, it throws dust all over when I cut something with it after waiting for the vac to come up to speed(why does it take Festool vacs so long to come up to speed?), not as bad as other saws I'll grant but the 90-95% figure Festool fans like to throw around? No way. More like 60-65% in my experience.

 

Mine came with a warped fence, I spent a year trying to figure out why it wouldn't cut square no matter how many times I adjusted it. I finally laid a Starrett straightedge against the fence, got out the feeler gauges and figured out it was bowed out >.010" in the center. Got on the phone with Festool support, the rep suggested a fix, it didn't work so they sent me a new fence. Now it cuts square. I'll give Festool Customer Service their props, they're great to deal with and won't give up until you're satisfied. Kudos to them and all that.

 

But my opinion is that I shouldn't need to deal with CS after I've laid out(when I bought mine) $1300 for a 10" chopsaw. I mean, like, really? And it looks like QC has suffered in the 4 years since. Every time I use my $1700 chopsaw station I wonder "What in Hell was I thinking?". Beware the Green KoolAid.

 

I have a lot of Festools that I'm happy with. But just like any other tool manufacturer they have their diamonds and their stones. IMO, the Kapex falls into the latter category.

 

You asked....

 

Bill

  • Author

"Loaded Question: Is the Kapex worth the price?"

 

If you ask me(and you did in a roundabout way): No. Not just no, Hell no!

 

It's a chopsaw. Yes, it doesn't take up a lot of space behind for the rails and the dust collection is a lot better than the rest but don't expect to do trim in a finished home without making a mess. It's hard to square up and easy to knock out. The blades are expensive and the latest versions can only be sharpened by a very few sharpening shops(as hhh found out).

 

Go over to the FOG , hit "Search" and enter "Kapex". Choose "Search for Topics Only" and then "Choose a Board" and "Festool Tool Problems". Twenty threads this year alone, 180 threads total, most having to do with alignment, blade guard issues and most recently(like in the last year or so), motors smoking and tables not being parallel.

 

So would I recommend you drop $1600 on a chopsaw? Only if I didn't like you. ;)

 

Yes, I own one. Yes, it sits in a stand with a dedicated CT Midi(latest version that pulls 137 cfm or whatever). Yes, it's connected to the vac with a short 36mm hose. Yes, it throws dust all over when I cut something with it after waiting for the vac to come up to speed(why does it take Festool vacs so long to come up to speed?), not as bad as other saws I'll grant but the 90-95% figure Festool fans like to throw around? No way. More like 60-65% in my experience.

 

Mine came with a warped fence, I spent a year trying to figure out why it wouldn't cut square no matter how many times I adjusted it. I finally laid a Starrett straightedge against the fence, got out the feeler gauges and figured out it was bowed out >.010" in the center. Got on the phone with Festool support, the rep suggested a fix, it didn't work so they sent me a new fence. Now it cuts square. I'll give Festool Customer Service their props, they're great to deal with and won't give up until you're satisfied. Kudos to them and all that.

 

But my opinion is that I shouldn't need to deal with CS after I've laid out(when I bought mine) $1300 for a 10" chopsaw. I mean, like, really? And it looks like QC has suffered in the 4 years since. Every time I use my $1700 chopsaw station I wonder "What in Hell was I thinking?". Beware the Green KoolAid.

 

I have a lot of Festools that I'm happy with. But just like any other tool manufacturer they have their diamonds and their stones. IMO, the Kapex falls into the latter category.

 

You asked....

 

Bill

Thanks for your informative and honest opinion.

Good article on miter saws in the June Fine Woodworking. The Kapex is not reviewed. Everything Festool is in it's own world with accuracy and features but it costs more. Especially on this tool. I do own a few green tools but not the Kapex.

I would go with the Bosch if I was buying one right now. Put the other $600 towards something else. Super accurate Miter saw would be nice to have but not necessary for me.

My el cheapo miter saw is only good for construction projects and cutting rough hardwoods.

I can relay tomorrow how my bosch performs after replacing the bad bearing. I'm sure it will be a rockstar now. One thing I will say is, the glide arm on it that replaces the slider, is unmatched in the incredible smoothness, nothing comes even close to that. I was unhappy since day one about the deflection, but it should be almost if not corrected now. If it is all better, I will incorporate it into my shop workflow for a few things including crown, face frame bead and other trim components. Still rely on my ts for clean crosscuts. This saw also tucks right up against the wall for space saving, but it is a heavy bastard. 

For me, the option of using the chop saw for more than just rough stock break down is worth the extra funds.  When I get the extra funds, I'll get the saw.

 

Therein lies the issue.  The ultimate question is if you can justify that cost in your shop based on your income, expenses, and your shop's needs.  

 

Frankly, if everyone had unlimited funds they would probably be drinking a lot of the green koolaid.  That is just simply not where everyone is at and there are some good saws on the market that get the job done. 

 

In the end, it's an individual question that only the individual can answer.

No.  It is well made, and accurate, but woefully underpowered.

 

I love Festool.  But, No.  Pains me to say it.  But, No.

 

miw

I've used mine to cut 12/4 hard maple.  If the stock is square and the blade is sharp, it's a hot knife through butter.  Not sure how much more power you need.

 

The problem I have with most of the Kapex naysayers is that their naysaying is generally based upon its cost.  Like Kev said, if money were no object, which saw would you own and why?  Sorry if you can't afford one or don't wanna pay the asking price, but the fact that you can't or won't doesn't suddenly make it a less superior machine.  I don't like the price tag on Lie Nielsen planes, either, but that doesn't change the reality that they're of higher quality than comparable Wood Rivers.

 

Quality is fairly objective.  Value is far more subjective.  Don't confuse the two.  Pug rightfully asserted that it's a loaded question, and it's loaded because value is different for everyone.  Ask a billionaire and a hobo if a Ferrari is worth the price, and you'll get two very different answers.  Is the Ferrari any less of a bad mofo because the hobo says no?

If i walked into my shop today and there was a kapex sitting there, pants would be shit in!

From my perspective that's a lot of money for the function it performs, so it really boils down to what that amount of money means to you vs what you get.  Kapex is one of the many luxuries in life that I can't justify, but YMMV.  In fairness, I've never used one, so perhaps I don't know what I'm missing, but OTOH, I've never felt that my crosscut capability was lacking, and I rarely even bother to pull out my CMS.  

==>I've used mine to cut 12/4 hard maple.  If the stock is square and the blade is sharp, it's a hot knife through butter

Well... Maybe a luke-warm knife... and the butter's been in the fridge :)

 

To Eric's point, the Kapex has plenty of power for 99.9% of furniture components -- but not if you're a decking contractor... My two DeWalts and Makita both had/have more power -- but they are/were 12" job site saws with site-oriented blades... I did process sticks of 16/4 Sugar (rock) Maple for my Roubo build with the Kapex and it was slow going with some burning...

 

The blade makes a huge difference. If I'm in DIY mode, I install the 60-tooth and have at it... But it's the 90T Signature ChopMaster that lives in the saw... It's really heads-above the 80T FT product. Yea it's expensive, but I got four sharpening coupons with the purchase...

 

BTW: it's usually never published, but Jim Forrest sometimes includes sharpening coupons if you buy the blades directly from the factory... You've got to look at the packaging carefully -- like a dumb-ass, I once tossed some coupons included with the small instruction booklet... I only found them when bag-diving for something else -- makes me wonder how many times I simply didn't notice...

  • Author

Well I tried the kapex today, and I must say that I was not overwhelmed. Maybe I built it up in my head too much - that it would be wearing a red cape or something, but it felt a little anticlimatic.

I like the laser function, but the plastic blade guard seemed to interfere with it's proper operation. Maybe the saw needs tuning. The blade guard is pretty cool, and I really like the dust collection. It felt very light ( which is good I suppose). It's was accurate however, and that's what counts.

Directly next to the kapex was the fetool router table. I did some work on it, and I was mega impressed with it. The dust collection was unbelievable,a and the above table adjustment was impressive.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.