DannyBoy Posted October 31, 2010 Report Posted October 31, 2010 Well guys.....I popped the question last night (and she said yes)! It was extremely nerve racking as you know if you have gone through this, but thankfully making this box took my mind off the situation. I made about 8 different boxes before this one...my OCD was off the charts experimenting with different designs, joinery, and wood...then finally decided on walnut with hard maple splines and sycamore for the top. I ripped the guts out of a ring box (from china) that the jewler gave me and it worked nicely. The lid stays on with magnets that are hidden with matching plugs. I showed the jewler and he is interested in ordering some, so we'll see where it goes! Quote
PMR Posted November 1, 2010 Report Posted November 1, 2010 Congrats Danny, the box looks great and will be a lifetime keepsake for your bride to be. Quote
Vic Posted November 1, 2010 Report Posted November 1, 2010 Awesome Danny!! Small and incredibly tight joinery is hard to pull off! Great job. Good contrast in woods. Good luck on the jeweler gig and CONGRATS, buddy!!! Quote
Jim DaddyO Posted November 1, 2010 Report Posted November 1, 2010 That is great Danny....congrats on all levels, bride, box, and jeweler! Quote
mlehikoinen Posted November 1, 2010 Report Posted November 1, 2010 Congratulations Danny! That is one sweet looking ring box. I'm sure it will be treasured forever. Quote
DannyBoy Posted November 1, 2010 Author Report Posted November 1, 2010 Thanks guys... Monday morning and champagne is still flowing through my veins. Quote
PaulMarcel Posted November 2, 2010 Report Posted November 2, 2010 Thanks guys... Monday morning and champagne is still flowing through my veins. Ain't it great?!? Congratulations! We lost another one, but obviously she's worth it (but get that 16" jointer/planer before "the day" so you don't have to ask permission!!!) j/k... bachelor humor... Quote
Guest Mahoganus Posted November 2, 2010 Report Posted November 2, 2010 Congratulations and what a better way to propose to your women with something hand made by you. Quote
JcMcGrath Posted November 2, 2010 Report Posted November 2, 2010 Congrats! Beautiful workmanship for such a wonderful occasion! JCM Quote
susieq4131 Posted November 6, 2010 Report Posted November 6, 2010 Congratulation to the groom-to-be and best wishes to the bride-to-be. What a beautiful ring box and a wonderful idea. Something to be treasured - forever. SQ Quote
woodtinkerer Posted November 11, 2010 Report Posted November 11, 2010 Congrats!! I had a question about the box, you said the lid was held on with magnents but we covered by plugs? Are they pretty stong magnents? is the lid held pretty well? I have a small jewelryl box i am making and i wanted to keep the doors closed with the magnents but i figured i would have to keep them exposed but with the covering them idea i am worried they might not be stong enough. I bought mine from menards so i doubt if they are high quality. How much attraction do you think you lost from putting a plug over them? Quote
DannyBoy Posted November 12, 2010 Author Report Posted November 12, 2010 Congrats!! I had a question about the box, you said the lid was held on with magnents but we covered by plugs? Are they pretty stong magnents? is the lid held pretty well? I have a small jewelryl box i am making and i wanted to keep the doors closed with the magnents but i figured i would have to keep them exposed but with the covering them idea i am worried they might not be stong enough. I bought mine from menards so i doubt if they are high quality. How much attraction do you think you lost from putting a plug over them? Hey Tinkerer...I used a 1/4" rare-earth magnet in each corner about 1/32" recessed. The plugs have absolutely no effect (or very little) on the magnetic field. I suppose you could say it is a veneer over the magnets because the "plug" is so thin. I drilled one hole at a time in each corner of the box and used a dowel center finder to mark the spot for the lid. Then some 5 minute epoxy, a flush cut saw, followed by a card scraper to clean it up. You can turn the box over, shake it, and the lid stays on. When you put the lid back on, you can feel the magnets pull it out of your hand! These are the magnets I used... http://www.leevalley.com/US/wood/page.aspx?p=32065&cat=1,42363,42348 1 Quote
woodtinkerer Posted November 12, 2010 Report Posted November 12, 2010 Hey Tinkerer...I used a 1/4" rare-earth magnet in each corner about 1/32" recessed. The plugs have absolutely no effect (or very little) on the magnetic field. I suppose you could say it is a veneer over the magnets because the "plug" is so thin. I drilled one hole at a time in each corner of the box and used a dowel center finder to mark the spot for the lid. Then some 5 minute epoxy, a flush cut saw, followed by a card scraper to clean it up. You can turn the box over, shake it, and the lid stays on. When you put the lid back on, you can feel the magnets pull it out of your hand! These are the magnets I used... http://www.leevalley.com/US/wood/page.aspx?p=32065&cat=1,42363,42348 thanks for the link. Ok so you used a dowel to fill the hole after the magnet was put in? I might try this on my box, thanks Quote
DannyBoy Posted November 12, 2010 Author Report Posted November 12, 2010 thanks for the link. Ok so you used a dowel to fill the hole after the magnet was put in? I might try this on my box, thanks You are correct. I made the dowels out of the same material. Quote
PaulMarcel Posted November 13, 2010 Report Posted November 13, 2010 So just to clarify... you used a plug cutter to cut the plug so it was face grain, right? It looks that way on the picture. A regular dowel would show end-grain. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.