Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pre stain conditioner and BLO...

Featured Replies

  • Author

Ugh...

I sanded the trouble spots down and restained. I did not use the conditioner this time. Most spots came out really well. The lid is absolutely gorgeous. But there is a bad spot right on the front that is giving me trouble. Plus the sand paper is clogging up with stain oil so quickly that I'm getting some really bad sanding swirls. :(

Any advice?

post-6956-14116510454279_thumb.jpg

post-6956-14116510637792_thumb.jpg

post-6956-14116510826735_thumb.jpg

Down periods like this happen from time to time. Finishing is not my personal area of expertise. I know what I know but that is limited by experience. Can you define what you mean by "bad spot" and/or post a closeup? The paper load up sounds like moisture to me. Your finish may not be cured enough to sand right now. Does "swirls" mean random orbit?

I think you got a lot of good ideas in previous posts.  I'd try one or two of those.  Softwoods and oil-based stains don't play nice.  They just don't.  That's why it was suggested to either try a sealer or pre-stain conditioner of some kind, or to spray.  I don't care what kind of witch's brew concoction you come up with...if you're wiping oil-based stain on raw softwood, you're gonna have problems.

  • Author

Well I think I got as good of a result as I can. I sanded the light spot down and then some. Made sure I would be sanding through any blo/mineral spirit mic that might remain in the wood. Then I applied the stain liberally let it sit for a minute and rubbed it out.

Here's the result.

post-6956-14116953252264_thumb.jpg

post-6956-1411695347492_thumb.jpg

  • Author

I didn't ignore the answers.

I had made it clear the plain was to use the stain. The question was about how to mix the best conditioner and whether or not I need a conditioner. I do appreciate the input and plan to use some of the wisdom shared on future projects. But for now the question really wasn't answered within the parameters.

I am an admin on a few audio forums as well and one of my pet peeves is when somebody asks for suggestions for a 15" subwoofer and people are like "check out these 10" woofers".

No disrespect intended of course. Thank you for sharing your knowledge.

In a pinch, any blade will scrape. Similar to York Pitch plane iron angles, you can use a sharpened plane iron. The action is not identical to a well burred card, but it will work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.