Eric. Posted November 9, 2014 Author Report Posted November 9, 2014 It's just a jig for drilling the hole for the bolt in the end of the rail. A fairly boring thing to take a picture of, as Sam alluded to. Thanks, Sam! Ya little bastard. Quote
chefmagnus@grics.net Posted November 9, 2014 Report Posted November 9, 2014 Where did you find the white irwin clamps? Mine are all black or blue. Quote
bob493 Posted November 9, 2014 Report Posted November 9, 2014 Nimbus? Is that what the wicked witch of the north of me rides to work? FOR SHAME! bed is looking solid! Should turn out quite well. Quote
ChetlovesMer Posted November 10, 2014 Report Posted November 10, 2014 Where did you find the white irwin clamps? Mine are all black or blue. Chef, those are the newer ones. Quote
ChetlovesMer Posted November 10, 2014 Report Posted November 10, 2014 Eric, What's up? Hour 63? Hour 95? What about all those hours in between? Quote
Eric. Posted November 10, 2014 Author Report Posted November 10, 2014 Who knows. I get lost in the shop. I'm kidding anyway, of course...I'm not really keeping track of my time. Don't care. I work on it for 5 minutes here, an hour there, off and on constantly. A full, interrupted day in the shop is pretty much a fantasy at this point. The Irwin clamps are the XPs...they're silver, not white. They're not new (the pair pictured is a new pair, but XPs have been around for years), but they're far superior to the regular ones with the yellow. They exert many many more pounds of pressure. I don't use them for glue-ups, but I use them constantly for "extra set of hands" kind of stuff and bench clamping, etc. I don't own any of the yellow ones...I find them pretty close to useless. Quote
ChetlovesMer Posted November 10, 2014 Report Posted November 10, 2014 Eric, I didn't say new... I said newer. I have the old ones. You know, the yellow ones. Mine are like 15 years old. I couldn't remember the name right off. XD, XP, XZ ....? Quote
ChetlovesMer Posted November 10, 2014 Report Posted November 10, 2014 Eric, I just realized that last post sounded kind of snotty. Sorry about that. Quote
Eric. Posted November 10, 2014 Author Report Posted November 10, 2014 No worries. I don't get offended easily. I will say, though...it's about 70 degrees and windy here today...I have the garage door open and leaves are blowing into my shop by the hundreds. THAT is pissing me off a little bit. Quote
..Kev Posted November 10, 2014 Report Posted November 10, 2014 No worries. I don't get offended easily. I will say, though...it's about 70 degrees and windy here today...I have the garage door open and leaves are blowing into my shop by the hundreds. THAT is pissing me off a little bit. It's about 45 degrees here so, I turned the shop heat on to take the chill off just a bit Quote
bushwacked Posted November 10, 2014 Report Posted November 10, 2014 No worries. I don't get offended easily. I will say, though...it's about 70 degrees and windy here today...I have the garage door open and leaves are blowing into my shop by the hundreds. THAT is pissing me off a little bit. Hell that's one problem I could solve for you ... *push button* Quote
chefmagnus@grics.net Posted November 10, 2014 Report Posted November 10, 2014 Thanks, I when to our local "clamps are us". They only have blue no name clamps and aren't as good as my old yellow ones. And mine are old, my guess 20 years, It is in the 60's and very breezy. I am moving some boards from entryway to the pantry. Quote
Eric. Posted November 11, 2014 Author Report Posted November 11, 2014 Hell that's one problem I could solve for you ... *push button* I'm gonna push the mute button on you if you don't watch it. I was doing some chores today that required I leave the door open, otherwise I would have closed it. Appreciate the tip though, smart ass. Supposed to be in the 30s the rest of the week, and from what I hear most of the country is gonna get hit with a big push of Canadian air. Thanks a lot, ya hosers! Quote
..Kev Posted November 11, 2014 Report Posted November 11, 2014 I'm gonna push the mute button on you if you don't watch it. I was doing some chores today that required I leave the door open, otherwise I would have closed it. Appreciate the tip though, smart ass. Supposed to be in the 30s the rest of the week, and from what I hear most of the country is gonna get hit with a big push of Canadian air. Thanks a lot, ya hosers! Suppose they required the broom and other cleaning equipment in your shop Quote
bushwacked Posted November 11, 2014 Report Posted November 11, 2014 I'm gonna push the mute button on you if you don't watch it. I was doing some chores today that required I leave the door open, otherwise I would have closed it. Appreciate the tip though, smart ass. Supposed to be in the 30s the rest of the week, and from what I hear most of the country is gonna get hit with a big push of Canadian air. Thanks a lot, ya hosers! Haha Yep it's going to get really cold this week. Our cold weather hits us here tomorrow in north Texas. Should be interesting. Quote
Eric. Posted November 17, 2014 Author Report Posted November 17, 2014 Hour 138...A short burst of activity this evening yields the slat supports. Dado King eats the meat... Quick rip and then there were two... Not very interesting, I know, but it's progress nonetheless, so I figured I'd post it. Three hours of shop time in the entire last week. That's fantastic. Should be done by NEXT Christmas at this rate. Quote
..Kev Posted November 17, 2014 Report Posted November 17, 2014 Hour 138...A short burst of activity this evening yields the slat supports. Not very interesting, I know, but it's progress nonetheless, so I figured I'd post it. Three hours of shop time in the entire last week. That's fantastic. Should be done by NEXT Christmas at this rate. Seeing your hourly numbers is comical Quote
Eric. Posted November 17, 2014 Author Report Posted November 17, 2014 I'm including the hours I spend daydreaming about being in the shop and contemplating my next move. 1 Quote
rodger. Posted November 17, 2014 Report Posted November 17, 2014 I'm gonna push the mute button on you if you don't watch it. I was doing some chores today that required I leave the door open, otherwise I would have closed it. Appreciate the tip though, smart ass. Supposed to be in the 30s the rest of the week, and from what I hear most of the country is gonna get hit with a big push of Canadian air. Thanks a lot, ya hosers! Don't be hatin! It snowed here today, high of 0 degrees Celcius. Not sure what that is in the Voodo American Temperature scale. Quote
wtnhighlander Posted November 17, 2014 Report Posted November 17, 2014 Don't be hatin! It snowed here today, high of 0 degrees Celcius. Not sure what that is in the Voodo American Temperature scale. Zero C = too cold for this southern boy! Quote
Eric. Posted November 17, 2014 Author Report Posted November 17, 2014 0* celsius is the freezing point, which means 32*F. Which also means it was about the same temperature here in MO today. That's one of two celsius measurements that make sense to me. The other is 100*. Anything in the middle may as well be millimeters...equally useless numbers. 1 Quote
ChetlovesMer Posted November 17, 2014 Report Posted November 17, 2014 Eric, much colder here. ... 14 degrees F. That's -10 C. But this isn't a thread for my home is colder than your home. This is a thread for the bed you are building. Great to see the progress. Looking forward to the next post. Quote
Freddie Posted November 17, 2014 Report Posted November 17, 2014 What is this, a who got the bigger winter coat contest? Quote
bushwacked Posted November 17, 2014 Report Posted November 17, 2014 I kinda like the weather battle. Texas got ice. So you know what that means. The state shut down haha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.