Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Candle holder... The perfect gift I was trying to figure out

Featured Replies

  • Replies 60
  • Views 9.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Slick as a ribbon.... nice job!

  • If you do manage to get a Forstner bit of the right size use it to make a routing template. Otherwise if you just use the Forstner to make the recess you will be left with a location hole in the centr

  • Yes I'm with Eric. I would guide the piece with paddles (I value my fingers too much) on the router table only after removing the most waste I could. There is a likelyhood the piece could grab and spl

Looks awesome..  Some Arm-R-Seal would look good and not take a lot of time for curing..

  • Author

The problem is gonna be waiting a day or 2 before reapplying. Not having an HVLP system isn't a good thing. My finishes are all usually rubbed finishes. 

ahh same here. i would also think that the blo would amber that beautiful sycamore, maybe you are looking for that but... 

 

i've grown to love arm r seal, so I'll second that one... 

The problem is gonna be waiting a day or 2 before reapplying. Not having an HVLP system isn't a good thing. My finishes are all usually rubbed finishes. 

 

If you crank the heat in your shop, you can do a coat in the morning and another coat before bed (talking Arm-R-Seal).  That piece shouldn't require more than three coats, so you're looking at just a couple days.  Or you could BLO it...but it will probably yellow that sycamore.

  • Author

Which Arm R Seal would you recommend? I'm guessing Top coat? https://generalfinishes.com/retail-products/oil-base-top-coats/arm-r-seal-urethane-topcoat#.VJGfUcABg

 

I haven't used Arm R Seal. I've got the following stuff:

 

Super blonde shellac

BLO

Tung Oil

Walnut Oil

General Finishes Polycrylic Gloss

Standard Polyurethane

Yes, that's the right stuff.  Super easy and quick and will look great.

I use the semi-gloss but that's just a sheen preference, otherwise same stuff.  and I've done exactly what Eric suggests - 2 coats a day in a warm shop (abt 12 hrs to dry).  so easy to use too, if I can make it look good anyone can :)

The shellac would be the fastest if you want a film finish, obviously.  I've decided to never use shellac again until I have HVLP...as many times as I've tried, I just can't get it to lay down consistently.  Stuff just dries TOO fast and I don't like it for wiping.

 

I use satin Arm-R-Seal almost exclusively.  I don't really dig the shiny, plasticy look.  But like stb said, that's just preference.

  • Author

I use the semi-gloss but that's just a sheen preference, otherwise same stuff.  and I've done exactly what Eric suggests - 2 coats a day in a warm shop (abt 12 hrs to dry).  so easy to use too, if I can make it look good anyone can :)

 

 

Do you sand between coats? 600? 400? 320? wet or dry sanding between coats? I usually hit shellac with 600 between coats.

I usually light sand with 600 between coats just to get rid of the nibs..

 

I also usually get about 3 coats a day on but, I do make sure my shop is about 70 when I do that and try to do the first one pretty early in the morning.

  • Author

Shellac is great for small parts as a wipe on. I learned on my Batman walking stick project that it was horrible for the spiraling in the design. 

 

I like satin finishes best myself. 

i'm the wrong person to ask about sanding between coats as I am just winging it so far.  light sanding with 320 after first coat (dry) just to remove dust nibs, 600 after 2nd coat with a little mineral spirits/mineral oil for lube, and nothing after third coat.  I haven't had a project yet where I wanted to really build up a finish so beyond that i'm probably clueless.  but for this piece 3 coats would probably do it.

I like 320 after the first coat, 600 thereafter.  Light sanding, just knocking off the nibs.  I use the 320 after the first one because it's the roughest and I find it faster.  But you could get away with 600 for all coats.

 

For my final coat, I like to thin the A-R-S 50/50 with mineral spirits.  It self-levels much better and prevents wiping marks.  Also it dries faster so offers less opportunity for dust to settle in the final coat.

 

Wet buff with a 2000-4000 grit pad after it cures.

  • Author

I've got abralon pads and micromesh pads. I use them mainly when I do pens and I want to get a crazy shine and do a CA finish. Would those do for the buffing?

I use satin Arm-R-Seal almost exclusively.  I don't really dig the shiny, plasticy look.

 

Do you just go straight Arm-R-Seal on raw wood after sanding or do you use their Seal-A-Cell first?

I go straight to the Arm-R-Seal..

Yep, same as Kev.  I see no reason to start with anything else unless you have a blotchy wood and you want to avoid blotch.  I don't work with pine and "blotch" in anything else is what I call character.  Cherry in particular...some people like that clean, even tone in cherry...I like the blotch.  Makes it warm and rich and more organic, IMO.  I embrace it.  You'll see what I mean very soon... :)

  • Author

Thanks for the advice guys. Finishing is still my least favorite part. I enjoy sanding more than finishing... That's for damn sure!

Not if you're using an oil-based finish.  But it would raise the grain, so you'd have to deal with another round of sanding. :)

  • Author

I'm definitely not up for playing the grain raising sanding game. I sand to 320 and call it quits on this project. I sand my pens to 600, then I move to abralon pads and go to 4000, then CA finish, then the micro mesh wet sand to 12000, then plastx scratch remover followed by a buffing wheel with blue ultra fine compound.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.