Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Santa's Workshop Illinois

Featured Replies

These are some of the Christmas gifts I have been working on this year. Once I master wood working I think I'll take a stab at my photography skills. I doubt if I'll live that long. :P   MERRY CHRISTMAS Everyone and thanks for sharing all the knowledge and comradery this year and look forward to much more in the coming 2015.c0cd7b0d-2310-4e71-8cc9-3e26026a12e4_zpsd33ed4fe-689c-4280-9ebf-f706e82dca47_zpsa8dd4c66-fb1d-4ced-beaa-4f434ea69cc6_zps

Edit your post (don't change anything) and save it again. The images will then show up properly.

There is a bug in the forum software that crops up periodically.

  • Author

I see that. I also noticed that I stole the topic title from some one and changed it. Thanks

Did you turn the counters for the connect 4? Looks like a great project especially with storage built into the stand. Oh yes no ticker tape parade or anything :)

  • Author

I don't have a lathe. I got them from Lee Valley. Even if I had a lathe I don't think I would have turned them. I built four of those games and there are 56 checkers per game board. It was bad enough staining and sealing over 200 of those suckers.

Beautiful gifts for sure!  What did you use for hinges in the first box?

  • Author

 It has brass pins drilled through the sides and into the lid. Hinges and I don't get along.

 It has brass pins drilled through the sides and into the lid. Hinges and I don't get along.

 

I see it now..  

Did you drill all the way through for those pins?

Is the 2nd one trays of some sort?

Anyways, great job on them. Wish I could do something that cool.

Cool Connect Four game!

"How did you do the joinery?"

"Here, diagonally!"

"Pretty sneaky, sis"

  • Author

Did you drill all the way through for those pins?

Is the 2nd one trays of some sort?

Anyways, great job on them. Wish I could do something that cool.

No, just through the side of the box and about a half inch on the lid. Epoxied the pin in the box. Yes they are serving trays.  

As I like boxes, I'm intrigued by the first pic. Did you cut the curves in the sides with a bs and/or router? Before or after the splines?

  • Author

The box started out as a regular box made out of 1 1/4" (5/4 for you lumber freaks)cherry. I then cut in the splines and then cut the curves in the box on my bandsaw. I found the board at my local sawmill and thought it was cool and decided to turn it into a gift for my wife. I wish I would have found a more highly figured piece of maple for the top but got rushed by the Holiday.

The box started out as a regular box made out of 1 1/4" (5/4 for you lumber freaks)cherry. I then cut in the splines and then cut the curves in the box on my bandsaw. I found the board at my local sawmill and thought it was cool and decided to turn it into a gift for my wife. I wish I would have found a more highly figured piece of maple for the top but got rushed by the Holiday.

 

Great work! I really like the box. FWIW : I personally think the lid being more simple does the box more justice than if it were "highly figured". The cherry has nice tasty grain and an over-done lid would have taken away from that. 

I would probably have run the grain horizontally and it wouldn't have looked nearly as good. I like it!

Coop, since you like boxes, I highly recommend this book for inspirado. If you're already cut your teeth on a few boxes in the past, the design elements are pretty easy to reverse engineer. Very cool coffee table book. I keep mine in my office.

Like that curved design by the way...I'm making 8 or so for Xmas, and one of my boards in pretty thick. Might be the one I try this on. Great work

ca384a77d0d279c024687cb4e7c5b57c.jpg

I have that boxes book.  Also have cabinets and tables from the same series.  All three are packed with inspiration.  Great for overcoming designer's block...which is usually my biggest woodworking challenge, being the non-artistic type.  Sucks for me.

Thanks Vinn. I have a couple by Doug Stowe that got me started. I will order this as my Christmas present to myself!

Ordered all three and got free shipping. I'm like you Eric, I need all the inspiration I can get!

I love that idea on the cover, with the untrimmed mitre keys supporting little legs. Going to try it out in a few days.

I love connect 4 and so do my kids! Is this design of your own creation? I would love detailed info on how it's made.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.