Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

french cleat or drawers

Featured Replies

so those of you with full shops what do you think is better to use for storage.  would you rather have the French cleat system for hanging your tools on the walls and inside cabinets on the walls or do you prefer to have your tools in drawers and cabinets that are free standing and act as stands for your power tools?

Both if you can..  Some things should be left out.

 

Personally, I like drawers and cabinets.  Keeps dust off of things and, if well organized, you always know where things are.

I'll second the drawers and cabinets. While I'm still in the process of doing built drawers and cabinets, I do have some temporary plastic drawers which I use to keep things organized. 

Im the opposite I don't want anything that is not machinery on the floors. 

 

 

Unless you've got a need for a benchtop tool like a bench grinder or counter top for your sharpening stones. Any surface that is needed to do a task is best utilized with storage underneath for space savings. Unless you've got an unlimited amount of floorspace.

Unless you've got a need for a benchtop tool like a bench grinder or counter top for your sharpening stones. Any surface that is needed to do a task is best utilized with storage underneath for space savings. Unless you've got an unlimited amount of floorspace.

 

Honestly it baffles me at how much stuff hobby folks own even those with dedicated shops seem to have them filled with I don't know what. :)

==>stuff hobby folks own

For many, part of the hobby is the tools... Which is really helpful -- without OCD/Hobby Collecting, there would be no LN, V, Blue Spruce, Bridge City, et al :)

==>stuff hobby folks own

For many, part of the hobby is the tools... Which is really helpful -- without OCD/Hobby Collecting, there would be no LN, V, Blue Spruce, Bridge City, et al :)

Yes I can attest to this statement :)

  • Popular Post

Honestly it baffles me at how much stuff hobby folks own even those with dedicated shops seem to have them filled with I don't know what. :)

 

Trip is right that a big part of the hobby is the tools...but also your point is why I had that other thread about multiple loose tenon systems.  I don't want to just end up with all of this stuff that I have just to have it or because at some point I thought it was cool.

 

That said, I do think most hobbyist probably accumulate a lot of things because they do a broad set of projects.   First they may do a bunch of small boxes and so they have lots of small clamps and little jigs and inlay stuff and whatnot...then they wanna do cabinets and get big clamps, big tools for handling sheet goods, and tools like the Domino for speed and efficiency...then they hit their artsy stage and get a lathe and a bunch of turning tools and start doing power carving and tons of specialized hand tools for carving...then those hand tools were cool so they have a hand tool phase and buy tons of planes and whatnot to build stuff by hand...then they realize that is slow and want to build small boxes again but now they can do it so much better if they replace this and that tool and get this other new thing...  It never ends. =p   It kinda reminds me of Trip's story about how he went into a bent lamination phase and accumulated hundreds (thousands?) of small clamps and then got a vacuum clamping setup and suddenly he just had all this stuff. =p

Trip is right that a big part of the hobby is the tools...but also your point is why I had that other thread about multiple loose tenon systems.  I don't want to just end up with all of this stuff that I have just to have it or because at some point I thought it was cool.

 

That said, I do think most hobbyist probably accumulate a lot of things because they do a broad set of projects.   First they may do a bunch of small boxes and so they have lots of small clamps and little jigs and inlay stuff and whatnot...then they wanna do cabinets and get big clamps, big tools for handling sheet goods, and tools like the Domino for speed and efficiency...then they hit their artsy stage and get a lathe and a bunch of turning tools and start doing power carving and tons of specialized hand tools for carving...then those hand tools were cool so they have a hand tool phase and buy tons of planes and whatnot to build stuff by hand...then they realize that is slow and want to build small boxes again but now they can do it so much better if they replace this and that tool and get this other new thing...  It never ends. =p   It kinda reminds me of Trip's story about how he went into a bent lamination phase and accumulated hundreds (thousands?) of small clamps and then got a vacuum clamping setup and suddenly he just had all this stuff. =p

 

I think this is accurate!  Yes, there are some things in my shop that are only rarely used but, there is nothing in my shop that is never used.

 

Most hobby shops are not limited to building only widgets so the tooling and toys will be more than the shop that only builds widgets.

Sounds to me like the first step to planning storage should be a garage sale. :)

 

 

There's a lot of truth there!   The first step in any organizing project is the three box triage, keep - toss - sell. 

I like having options.  I don't use every tool I have on a regular basis, but I use them all on occasion.  Anything I don't expect to eventually use gets sold.  One perk of buying quality tools...you don't lose too much when you resell.

 

As for the OP question...my organizational preferences from high to low...drawers, shelves, cabinets.  French cleat is kind of a gimmicky storage system, same as pegboard...which I have a small section of that I keep some non-woodworking tools on.  It's stupid looking but it does work well.  I hate those shops that are covered in pegboard.  Looks so suburban DIY.  How's that for elitist? :D

==>Trip's story about how he went into a bent lamination phase and accumulated hundreds (thousands?) of small clamps and then got a vacuum clamping setup and suddenly he just had all this stuff

Well, it's hundreds (I hope -- no; it really is only two hundred -- about)... My point was: as workflows shift, so should your kit... I changed what I built, needed a bunch of clamps to make that happen, then changed by workflow by using a vacuum setup, and now my clamp collection should shrink accordingly... At least my wife thinks so... :) Actually, I am planning to sell a bunch of clamps this year (probably between 50 and 100)...

 

My basic rule for tool management: if I don't use it for a year, it goes on the 'suspect' list... I then seriously think about eBaying all 'suspects'... About 60% of the time, it goes... Unfortunately, I then take that pot of $$ and get myself a new tool "that I think has suddenly become indispensable." I'm pretty sure my LAJ is going this year... It’s a good thing this is a hobby… If I ran my business this way…

I like having options.  I don't use every tool I have on a regular basis, but I use them all on occasion.  Anything I don't expect to eventually use gets sold.  One perk of buying quality tools...you don't lose too much when you resell.

 

I couldn't agree more. The tool I use the least is my hollow chisel mortiser followed by my compound miter saw. But those times like when I frame out my bathroom I'll be glad I have my CMS, that's really the only thing I use it for is  framing rooms. I've been tossing around the idea of selling my HCM and getting a Domino, and just do my mortises with a router and chisel. 

If I can stash it I'll do that before looking to build storage. I keep the tablesaw blades still plasti-coat inside my saw. A wooden box in my shaper holds about 100 knife sets. I swapped out the screws on the panel on my planer for knobs. I can store all the planer blades and jointer knives in there I would ever need. My drum sander cabinet holds about 25 full rolls. Bandsaw will hold a few narrow blades and misc like the miter gauge. Pocket hole machine will hold a couple thousand screws. Miter gauges are stuck to underside of tables wing with magnets. Lots of places to stash stuff without taking up or making storage space.

 I hate those shops that are covered in pegboard.  Looks so suburban DIY.  How's that for elitist? :D

Yeah, but it's so awesome when you draw in the outline of the tool on the pegboard so you know exactly where the hammer goes..

Yeah, but it's so awesome when you draw in the outline of the tool on the pegboard so you know exactly where the hammer goes..

 

I actually inlay all my drawers so that everything has a home..  Maybe a little OCD but, I can always find what I need.

Yeah, but it's so awesome when you draw in the outline of the tool on the pegboard so you know exactly where the hammer goes..

 

My parents (and unfortunately my wife) think that's the coolest idea ever...   =(

 

 

I actually inlay all my drawers so that everything has a home..  Maybe a little OCD but, I can always find what I need.

 

I didn't see any inlay in that photo of your LN stuff in the pimp your LNs thread?

Only thing cooler than pegboard is slatwall panels. Because the system to hang your stuff should cost more than the stuff you're hanging!

 

I didn't see any inlay in that photo of your LN stuff in the pimp your LNs thread?

 

My LNs are in a cabinet, not a drawer..  I think Mel's were in a drawer..

My LNs are in a cabinet, not a drawer..  I think Mel's were in a drawer..

 

Yes, this is correct.   I don't see how I could have confused you for any Llama, let alone a Fretless one.   I think I just saw the extremely organized drawer and my brain associates you with extreme organization in this forum. =p

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.