Mzdadoc Posted January 9, 2015 Report Posted January 9, 2015 My Clear Vue CV06 just arrived today. Now as Marc said in his review I can save money not replacing those dang bags. Quote
Chuck Melton Posted January 9, 2015 Report Posted January 9, 2015 Wow, I wrote a wordy post and then realized I was talking about a dust deputy, not a clear view. Way too much work this week. I need to go back on vacation. Quote
Dnorris1369 Posted January 9, 2015 Report Posted January 9, 2015 Congrats I'm sure you'll love it Sent from my iPhone using Tapatalk Quote
Brendon_t Posted January 10, 2015 Report Posted January 10, 2015 I'm in for your review. I'm thinking very seriously about picking up a cv06. Quote
rodger. Posted January 10, 2015 Report Posted January 10, 2015 I hope its good, but I can't see how it could improve on the dust deputy. Quote
Mzdadoc Posted January 11, 2015 Author Report Posted January 11, 2015 Here it is all assembled. I haven't used it extensively since we have all the kids this weekend. Putting it together could have been done in the dark so super simple. I have FT mini vac and luckily had an adapter which you'll see where it goes in at the top. If you saw Marc's updated review video of it that's what I did but I put a new Hepa bag in and after vacuuming my floors a bit and using my miter saw the bucket had everything and the bag was as new. I plugged the end and the bucket didn't callapse. I paid $149 from their site $169 with shipping and don't know what it costs to produce those molded pieces but I'd have to say it works perfectly but it's an $80 system at best. Quote
Coop Posted January 11, 2015 Report Posted January 11, 2015 Doc, Congrats. Kind of watch your bucket. I find once it gets half way full or so, you will start getting dust in your vac. Quote
Mzdadoc Posted January 11, 2015 Author Report Posted January 11, 2015 Good to know. Thanks Coop Quote
21meyer Posted January 12, 2015 Report Posted January 12, 2015 Mzdadoc, I have been looking into this same setup except with the Midi. How are you liking it? I was also curious if anyone has purchased only the cyclone and fabricated a rectangular box to sit on top of the extractor itself. I'm aware of the ultimate dust deputy but wanted to know if anyone had made the box with the Clear Vue or Oneida cyclone themselves and saved $150+? Quote
andrew-in-austin Posted January 14, 2015 Report Posted January 14, 2015 If you can get a 50mm hose between the vac and the cyclone I would recommend that highly. You are probably missing out on a lot more potential CFM. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.