Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Any reason to go wider than 48" for outfeed table?

Featured Replies

I was originally thinking of going the full width of my saw which is around 84". My current saw is 48x48 and I've never wished it was bigger and leaning towards that now. I don't have any desire to cut full sheets of plywood in half on it. I also plan on building an assembly table down the road. So any reason to go wider than 48" other to collect junk on it?

Mine's a bit wider but, I do a bunch of my work there as well.  If it's purely an OF table, no real reason to full width of the saw either.  

A smaller assembly table, might be useful, until you get your regular table built!

I have my table full width of the TS and 3' deep;  For my routine it's perfect.  I have storage shelves under for accessories and things I use often but don't necessarily want laying out in the open.  Thought about having a 4' depth but decided that unless i'm cutting something longer than 8' it wasn't necessary.  With a 3' table and the remaining depth of the TS after the blade it's still more than 4' which would be the tipping point for an 8' board / sheet, etc.

  • Author

I saw PB's full width in another outfeed thread and it is nice. Still going back and forth - I might have to get a quarter out!

Mine is full width but my saw is not as wide as your saw.  If I had your saw and plenty of space to work with, I'd make it as big as possible.  Can never have enough flat surface working area.  What exactly will you do with that space if it's not utilized by OF table?  Build a huge bank of drawers and cabinets underneath.  Be happy.

 

I yearn for a 4x8 torsion box assembly table.  Will never happen for me.

  • Author

Mine is full width but my saw is not as wide as your saw.  If I had your saw and plenty of space to work with, I'd make it as big as possible.  Can never have enough flat surface working area.  What exactly will you do with that space if it's not utilized by OF table?  Build a huge bank of drawers and cabinets underneath.  Be happy.

 

I yearn for a 4x8 torsion box assembly table.  Will never happen for me.

Eric, my never enough horizontal space was my original thinking. I already have 2 full sheets of melamine and might as well use them. Since I'm doubling them up for 1.5" thick I might need to run some extra cross braces across the base. Since it's essentially dead space in the shop, I think in this case build it bigger and not have any regrets down the road. 

If you plan on doing any work there, go big or go home..

 

Mine is about 48 x 60

I was originally thinking of going the full width of my saw which is around 84". My current saw is 48x48 and I've never wished it was bigger and leaning towards that now. I don't have any desire to cut full sheets of plywood in half on it. I also plan on building an assembly table down the road. So any reason to go wider than 48" other to collect junk on it?

 

I would just think about your work flow, not that your not going to cut sheet goods. Wood has to come to the saw before its cut and it has to go somewhere after its cut. The bigger table makes for a nice sort of circular work flow even for small pieces.

Im actually thinking about taking mine out and buying the folding HTC out feed rollers.

I went to a big furniture shop a few years ago. They had a slider but no assembly tables or work benches just a herd of these little boxes on wheel, some covered in carpet. When I asked about it his reasoning was simple. Tables are always the wrong height or in the wrong place anyways.

  • 2 weeks later...
  • Author

Finished the outfeed table today and glad I went full width. We had a snow storm last night and winds today. The power went out while routing one of the miter slots which caused me to go off course a little. Sucks but it's just a piece of shop furniture and I'll get over it.

post-8178-142282210496_thumb.jpg

post-8178-142282211566_thumb.jpg

post-8178-142282212656_thumb.jpg

  • Author

Where does the ping pong net attach?

Seriously nice setup Mike!

Good idea except person on the jointer side might want to wear a cup.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.