Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Porter Cable 690LR router Good/Bad or otherwise ?

Featured Replies

  • Author

This 690 I just ordered will not be here 'til Tue. But I just read the manual online and it looks like you have to take the motor off the base to change the bits. Maybe that's why everybody has 6 of them.

I just read where Grizz has a recall on all of their PC routers

I use one in a router table I built to Cut 1/4" dados. It has a power feeder on it. One lasts quite a few years under heavy commercial use and I just replace it when it eventually dies. They are little workhorses.

The big PC 7518 is in my main router table.

.... So what's the deal with people saying in these reveiws that i can't use it in a table?  I can't afford two routers right now so I do plan on using it in a table too.

 

Just a guess, but it could be that someone with a predrilled store bought router table couldn't figure out how to adapt the hole patterns in the base.  Could also be the lack of variable speed, but you can add an outboard speed control if you need to.  

 

$99 is a nice deal....haven't seen a price like that on a 690 in quite a while.  

When I got my 690 the plunge base was off center by atleast 1/16. Pretty crappy quality control. I was in the middle of an inlay project so i sandwitched a piece of ply between the bottom halves and reatatched it. Been that way ever since. That was the only issue i ever had with it though.

When I got my 690 the plunge base was off center by atleast 1/16. Pretty crappy quality control. I was in the middle of an inlay project so i sandwitched a piece of ply between the bottom halves and reatatched it. Been that way ever since. That was the only issue i ever had with it though.

They were not designed to be centered with the plunge base. You have to get an adjustable base and centering kit if you want it centered.

They were not designed to be centered with the plunge base. You have to get an adjustable base and centering kit if you want it centered.

 

Are you saying that the factory tolorences being out a sixteenth meets there QC, because it's not an intended router for inlay work? I guess that makes sense. Since, I've purchased a OF1400 that better serves that purpose. 

Are you saying that the factory tolorences being out a sixteenth meets there QC, because it's not an intended router for inlay work? I guess that makes sense. Since, I've purchased a OF1400 that better serves that purpose.

Yes. Folks have been complaining about this for decades.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.