Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wiring a new tablesaw cord

Featured Replies

I can handle basic electric work, but I'd like to get a few opinions from those who are more knowledgable than myself. My nearest outlet is about 12-15' from my saw on a wall, I've got an outlet directly above the saw for the lights I can plug it into, but the cord gets in the way. I have it plugged into an extension cord right now, but I'd like to just buy a short extension cord and wire it into the switch, so my question is what gauge wire would y'all recommend? It's a 15 amp motor, 120 volts. Thanks.

  • Author

Owners manual will have a cord size chart. All my machines are 10g

it does have one, but it's 10 miles away in my shop and I plan on locking myself in there Friday morning and not coming out till Monday evening. Call it a vacation :D all your machines are 220 powermatic yumminess to!

I'd use 12 ga. type SO.  There are a bunch of different variations of SO with other letters added on to the end.  Plain SO would be fine.  I still have machines running on type SO wire that's 35 years old and the wire is still just fine.  If you've ever been to a Fair and seen the black wires laying all on the ground with people walking on it, that's type SO.   I don't know exactly why, but it's hard to trip on it.  It's flexible that it lays down completely.

 

One of my old extension cords is made from some oil resistant variety of SO, and sawdust sticks to it.  I'd avoid that variety.

 

The only problem is that it's not cheap.

  • Author

I'd use 12 ga. type SO. There are a bunch of different variations of SO with other letters added on to the end. Plain SO would be fine. I still have machines running on type SO wire that's 35 years old and the wire is still just fine. If you've ever been to a Fair and seen the black wires laying all on the ground with people walking on it, that's type SO. I don't know exactly why, but it's hard to trip on it. It's flexible that it lays down completely.

One of my old extension cords is made from some oil resistant variety of SO, and sawdust sticks to it. I'd avoid that variety.

The only problem is that it's not cheap.

Thanks Tom, good info, it will be laying on the floor, unfortunately, I have a wood floor and the only way to put an outlet in the floor is under the barn, which is pretty much inaccessible unless you're a small child or a mouse.

When i bought my Grizzly 5HP table saw and went to wire it, I was amazed.  I opened the compartment on the back where you connect the power wire and there were strands of what looked like 14 or 16 gauge wire to connect to, to run the saw.  I looked it up in the manual and it called for a 14 or 16 gauge wire.  I went with a stranded 12 gauge - like Tom said the SO flexible cable.  I priced some the other day - it was about $1.10 per foot. I like to go bigger and be safe.

Tom is right it is harder to trip over SO. This is my tablesaw cord SO. It stays soft and flexible but SO is larger than the cheaper stuff.10g SO compared to 12g cheap cord for the vacuum cleaner.

post-5350-0-29995700-1430398633_thumb.jp

I made a threshold with a groove running down the middle of it for my tablesaw cord. Let's carts roll over and prevents tripping. 12 guage SO cord here too. Get a Hubbel or other high quality plug while you are at it, 33 years and still works fine.

When i bought my Grizzly 5HP table saw and went to wire it, I was amazed.  I opened the compartment on the back where you connect the power wire and there were strands of what looked like 14 or 16 gauge wire to connect to, to run the saw.  I looked it up in the manual and it called for a 14 or 16 gauge wire.  I went with a stranded 12 gauge - like Tom said the SO flexible cable.  I priced some the other day - it was about $1.10 per foot. I like to go bigger and be safe.

 

It all depends on how hot the wire is allowed to get and how well it will radiate that heat.  Building wire guages assume a rather poor ability for the wire to radiate the heat it generates.  Loot at this chart

 

https://www.eol.ucar.edu/rtf/facilities/isff/LOCAL_access_only/Wire_Size.htm

 

It says that 22 amps is ok for chasis wire with 16 guage but only 3.7 for power transmission.  I can't find it now but I have seen a table with charts for how many amps it takes to burn out various gauges of wire in certain time scales.

After my belt chewed through my cord, I did the same thing. Used 12 GA myself. Seems to work great.

  • Author

So it looks like 12-14 and I'll be safe. I'm going to take a look tomorrow and try to find the SO wire, I'm just not sure anybody around here will have it? Thanks for the good info guys!

  • Author

Specs on SO wire: http://www.awcwire.com/productspec.aspx?id=type-sow-so

Check with electrical equipment suppliers. If your state is one that people off the street can buy there, prices and selection will be better than the big boxes.

hmm, no electrical suppliers around here, our hardware store is good about having oddball stuff, I was hoping to do this first thing in the morning and get a full day in in the shop. If I can't find it I may just go with the extension cord and threshold.
  • Author

Well, got it all wired up, blew a fuse!?!? I'm 99.9% sure it's not my wiring, I mean it's only 3 wires, and I labeled everything. I need beer!

  • Author

How did you connect the wires?

with the same style connectors the factory cord had, I think I might have a cut in it, not sure but I can't mess with it right now... It has irritated me to no end at this point!
  • Author

It's official, wired with 12 awg, and I'm an idiot. Let's just say I was looking at the switch upside down :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.