Immortan D Posted November 6, 2015 Author Report Posted November 6, 2015 You may want to consider a kerfing saw riding against a batten to define the margins, repeated passes with the saw in the waste area to ease removal, chisel the waste and cleanup with a router plane... Look for a kerfing saw with a depth stop and fence...The one I liked the most is this one:It does not have a depth stop, but one can easily be built into the design. Quote
Gilgaron Posted November 6, 2015 Report Posted November 6, 2015 You could also use a stair saw like at TGIAG as a starting point. Blackburns has a neat looking design for his "Rebate Saw-Plane" as well. I don't blame you for avoiding the router, I would probably have used my drill press to waste most of that if it wasn't assembled yet. 1 Quote
G S Haydon Posted November 7, 2015 Report Posted November 7, 2015 I'll have to try one of these Kerfing planes, look handy for the re sawing application. Not sure I'd be so interested, however it could be a tool you keep finding a use for? Doesn't seem a common item in old tool lists? Quote
h3nry Posted November 7, 2015 Report Posted November 7, 2015 It does not have a depth stop, but one can easily be built into the design.Like an un-fenced stair-saw, the body *is* the depth-stop, you adjust the height of the blade to the depth, and it will stop cutting when it gets there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.