rodger. Posted December 4, 2015 Report Posted December 4, 2015 Was thinking about getting one of these. Anyone have one? Seems nice alternative to setting up the router.http://www.leevalley.com/en/wood/page.aspx?p=62030&cat=1,41182,62030 Quote
wdwerker Posted December 5, 2015 Report Posted December 5, 2015 Those will do the face of a curved part, router won't . Quote
Tom King Posted December 5, 2015 Report Posted December 5, 2015 I have this one: http://www.leevalley.com/en/wood/page.aspx?p=32679&cat=1,230,41182 I Iooked at that higher priced one, but we were making reproduction reeded mantles, and the extra reach of the wooden one was needed for parts of that job. It's surprising how easily these things work. I also have one of the old Stanleys, and got some cutters that work in that one from LN. We liked the LV cutters better than the harder metal ones from LN. The wooden one was a lot more pleasant using for hours than the steel Stanley.We mainly used that 3/16" triple bead cutter. I bought an extra one of those and sent to Todd at Whiteside to talk about making a custom router bit, but we were finished by hand before I could have a cutter made.The trouble with a router bit cutting a bead is that the quirk has to be wider so the cutter metal is not so fragile on a sharp point.For running a single edge bead, nothing beats a dedicated molding plane. I also bought some old center cutting, and multiple center beading molding planes, but it went so well with the beader that we didn't use those much.I have another reeded mantle to build out of Walnut, but don't know when we'll ever get to it.edited to add: I used numbered drill bit shanks and Diamond Lapping Film to sharpen in the curves, and polished both faces on the edges of waterstones. I use the edges on small cutters, like router planes, so as not to have to flatten the whole face afterwards. 2 Quote
derekcohen Posted December 6, 2015 Report Posted December 6, 2015 I wrote up a mini review several years ago: http://www.inthewoodshop.com/ToolReviews/MiniReviewofVeritasBeader.htmlRegards from PerthDerek 2 Quote
Gilgaron Posted December 7, 2015 Report Posted December 7, 2015 I use mine all the time, it is nice and easy to use. A sticking board helps. Quote
John Page Posted December 7, 2015 Report Posted December 7, 2015 Out of curiosity, would something like this be suitable for scribing lines for inlay work? I've been trying to figure out how to manage the perfling for an instrument I'm building without a router. Cutting a dozen feet or more of a thin channel by hand and accurately has been daunting to say the least. Would this be able to carve out a shallow (1mm or less) groove on weird complex curves? The only alternative I have thought of so far is using a marking gage on both faces and chiseling it out by hand, using an x-acto knife as a scraper to even it out. Don't mean to derail the conversation here but thought it was worth asking.Thanks! Quote
Tom King Posted December 7, 2015 Report Posted December 7, 2015 I would think one of the LN or LV inlay tools would work better. Quote
John Page Posted December 7, 2015 Report Posted December 7, 2015 Haven't heard of those before, but doing a quick look it seems as though that is just what I need! Also saw the router plane inlay cutting head, which may also be an option. For the sides, I can use the top as a reference surface, but the top uses the tight curves of the sides, so I'm not entirely sure that either would be able to make it all the way around. Thanks for pointing me in the right direction! Quote
Tom King Posted December 7, 2015 Report Posted December 7, 2015 I'll bet someone makes exactly the right tool that you need, but I'm not that familiar with what's available for doing that type of inlay. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.