Recommended Posts

Posted

I finally finished setting up my shop enough to actually make something more sophisticated than a wood clock ?.  

My first official furniture project is a computer desk/table for my son.  It's far from perfect and not entirely styled the way I would have chosen but it was made to my sons specs and somewhat to his sense of taste/style. Final dimensions are 44" wide x 30" deep and 30 1/4" high to the top of the table.

I don't have pics of every step but I'll include a few here as I describe what I did...

I used some nice 8/4 and 10/4 ash boards for the base structure and the top is cherry and walnuts veneers over 1" Baltic Birch core with ¾" solid cherry edge banding.

I started by cutting 2 pieces of ½ Baltic Birch to size and gluing them together with Titebond 3 and applying LOTS of clamps and some caulks I picked up.  Once they were final dimensioned (1 ½" smaller than finished table size) I cut ⅛" veneers for the top and bottom side of the table top - 3 walnut strips at around 3 1/2" wide as accents on the top and about 12 from cherry at around 6-7" wide.  I put my new Supermax 25-50 drum sander to work and got them to an even thickness somewhere between 3/32" and ⅛".

 

image_zpsb5mhcv0y.jpeg

Next I milled my base pieces from the ash. I forgot to check the bin in my dust collector so of course I overfilled it and had to spend a bunch of time cleaning the filter in the driveway with compressed air ?

I designed the table to be easily knocked down into 5 distinct sections (to get into my sons apartment) so I cut some through mortise/tenons in pieces of the leg assemblies and cross beams.

image_zpswwvsqrnz.jpeg

image_zpsd7lbqcbl.jpeg

A bunch of work with chisels and the mortises and tenons will work.  Up close they're not pretty but I was getting better by the last ones that at first.

I then veneered the walnut and cherry to the BB core.  I had never veneered before so I spent a LOT of time reading everything I could find and watching almost every single YouTube video!  In the end I bought a vacuum pump kit and 4'x4" veneer bag from JoeWoodworker.com. I highly recommend them.

After a (mostly) successful veneering job I then cut and applied the cherry edge banding to the top.

I did LOTS of shaping (mainly to correct my mistakes) and sanding and scraping to get everything smooth and clean.  I used West Systems epoxy (tinted with aniline dye powder) to fill any holes/voids/knots - I love the way this worked out!

I finished the table top with 1 coat of Danish oil followed by Satin Arm-R-Seal.  The ash (bottom leg assembly) is finished with a medium brown dye followed by Java wiping stain and then Satin Arm-R-Seal as well.

 

Posted

The through mortise/tenons on the base are attached with knockdown bolt hardware from LeeValley Tools. The tabletop is attached the same way to the tops of the leg assemblies.

In the end this is 5 assemblies - Left leg assembly, Right leg assembly, cross beam at rear (lower), crossbeam at middle (just below table top) and of course the table top itself.

in the end I'm fairly pleased with this project. I learned a ton of lessons and I think the table will be well used.

Final step will be delivery next Wednesday just before I leave to go on vacation to the Dominican Republic for a week ?

Here's a picture of one of the leg assemblies

 

image_zpsxkndv3fh.jpeg

Here's  the whole base (upside down on the floor) 

 

image_zpsldyezpoi.jpeg

Here's the whole desk/table - upside down on my assembly table

 

image_zpsdwzcw767.jpeg

image_zpskjwjvbbd.jpeg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 52 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined