Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tip #6 – Have a xCut Sled, get some Brass

Featured Replies

  • Popular Post

I posted on this some time ago, but I promised some photos and a better explanation...

I build a lot of table saw jigs and wanted a faster way to set the rear fence square to the blade -- the 5-cut method is great, but slow...

So, I got some brass bar stock in 1/8” and use the kerf from the initial half-cut to register a precision square and set the rear fence: http://www.mcmaster.com/#8951k08/=10oynu7

Note: the Woodpecker's square is perfect: http://www.woodpeck.com/2616squarewp.html

 

For example, I set this fence a few weeks ago, and off the bat it was 0.00019” out of square... Actually, it’s not – its wood, so it can’t really be that precise – but that’s how the 5-cut came out...

Tip6-1.thumb.jpg.38cb7378f7b63fb0c008075

 

Some added clarification on sense alignment procedure...

I follow the William 5-cut method until about the 27minute point.

 

 

Then instead of using a framing square for initial alignment, I insert the brass bar in the kerf and rear fence slot. I then secure a precision square against bar and adjust the front fence until square...

Tip6b-1.thumb.jpg.0ddc09f7d208e736b5cd2c

 

Another important variation to William's procedure: He drives two screws from the bottom of the fence for the initial pivot points... And that works OK, but it's a bit cumbersome. I use 1/4" carriage bolts (inserted from below the sled) into 5/16" holes as the initial pivot-point fasteners (secured with Loctite). This allows adjustment from the top (much more convenient) and the provides excellent freedom of movement for initial positioning. I then verify setup using the 5-cut method. When I'm happy, I drive 2"l #12 Spax screws from the bottom...

Tip6c-1.jpg.a1020287a41177013cd32488f331

 

Another advantage is when I need a precision measure for a cutoff... I use the brass bar and a precision scale... Not accurate to 0.00019, but what is?

Tip6a-2.jpg.53a6dc0b32241415d428a5e6005d

 

Note: I’m using a Starrett precision Metric and SAE rule ('scale' for the knit-pickers)... Dual scales are very handy around the shop -- and way more accurate than tape measures: http://www.starrett.com/metrology/metrology-products/precision-measuring-tools/precision-rules-straight-edges-parallels/Precision-Rules#currentPage=1&displayMode=grid&itemsPerPage=24&sortBy=wp/asc

 

So if I understand this right, you put the brass stock in the kerf and the engineer's square against the brass and fence, and then move the fence until it is flush to the square correct?

 

It's too bad the Woodpeckers square in question is a "one time tool". I'm sure there are enough precison-obsessed woodworkers out there to ensure a steady demand.

Sent from my iPad using Tapatalk

  • Author

==>So if I understand this right, you put the brass stock in the kerf and the engineer's square against the brass and fence, and then move the fence until it is flush to the square correct?

Yes...

I updated the OP with a [hopefully] better explanation and one or two more photos. thanks.

Trip, really liking the tips and look forward to more.  I don't know if possible, but maybe they can be placed in a sub folder for easy reference down the road.

Its too bad the reference library doesn't allow discussions, maybe one of the mods can start a thread there called "Trips Tips" and link to these threads.  I think a single post in the reference library would be fine.  In that post could be a link to each of the tips.  

  • Author

==>So if I understand this right, you put the brass stock in the kerf and the engineer's square against the brass and fence, and then move the fence until it is flush to the square correct?

I've updated the Tip to include a better description of the initial rear fence setup...

 

==>I don't know if possible, but maybe they can be placed in a sub folder for easy reference down the road

I'll look into it...

 

==>I'm sure there are enough precison-obsessed woodworkers out there to ensure a steady demand.

It could be a product-churn strategy... A run of squares is usually produced every year or two...

Love the pics. Very helpful. I actually bought the brass, it arrived Monday. Of course I don't have the woodpecker square, wish I did. I advised my wife that I want the Lee Valley framing square for my birthday next week. If she doesn't get it, I will. Then I will build another new sled. This method seems the least amount of guess work to me.

When I built my first crosscut sled. That's how I did it, only I didn't use brass 1/8" stock, I used 1/8" steel from my dad's machinist tools. Great tip. 

I think either "scale" or "rule" is equally precise to describe the item, though "scale" may be better suited to a particular function.

Just don't call it a "ruler" -- that has the potential be quite painful to the ears of any tool nazis out there.

If you want to market a product, machine a square with that brass on the kerf lead side and a flat for alignment on the back.  Make another with a 45 degree brass bar for aligning miter sleds.

Then license them to Woodpeckers or Kreg and retire to woodworking just for fun.

square.jpg

  • Author

==>I used 1/8" steel

Steel, aluminum, copper, whatever... It all works...

I use brass because I inventory it in sheets and rods for other projects and always have some around... When in my contemporary-furniture-period, I used it for drawer pulls, accents, miter splines, etc... At the time, it looked pretty cool, but now... Don't do it much anymore...

 

BTW: Brass machines well... I've got the Forrest WWII non-ferrous blade... Cuts brass like butter... Very clean, no sharp edges: http://www.forrestblades.com/non-ferrous-saw-blades-for-cutting-copper-aluminum-and-brass/

I still use it for splined-miters... Scuff and epoxy... Works well for tight-grained miters -- the epoxy squeeze-out can be an issue for open-pore...

 

HHH - That sled you posted pics of, the fences are real wood right? No movement issues? 

  • Author

==>looks to be about 1" wide would that be correct?

I believe it's at least 2", maybe 2.5"...

 

==>real wood right? No movement issues? 

Shop is climate controlled within a fairly narrow %RH. The sled is 3/4BB and fence is QS Padauk --- which is pretty stable. Obviously, there is some movement, but not enough for me to worry about...

If your shop is in the garage, subject to humidity swings, etc then I'd use plywood... Actually, I'd prefer to use three lams of 3/4BB the sled (like William Ng recommends in his video). It's just I have a ridiculously large stash of 12/4 through 20/4 QS Padauk that I'm always tripping over, so I just started making all my jigs from it... Don't ask how I got the stash, that's another thread...

Awesome. Makes sense. Unfortunately I am subject to the extremes of IL weather, so plywood for my next one for sure. Shoot even when I get a/c and heat in there I won't run it all the time to maintain 24x7. 

  • Author

Love the toothpicks... I mean shims... :)

Yea, drafting square is a great idea.... certainly a lot cheaper than a precision engineer's square...

 

Nice.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.