jmaichel Posted January 16, 2016 Report Posted January 16, 2016 Thoughts on them (brands). I never really thought I would find myself thinking about buying a portable table saw. Since I moved to HI all of my (limited) building has been with hand tools, which is the way I want it but lately I am realizing that I do have a need for a table in a very limited capacity. I have some 1" strips that I want to cut and have some other non furniture build projects I would like to complete, like planter boxes. I could do it all by hand but my shop time is very limited and like to spend it building furniture. I have owned full size (not cabinet saws) before so I really don't want to get into that discussion. I have a limited amount of space and really don't want to bring a full size saw back to states with me in a couple years. Quote
bleedinblue Posted January 16, 2016 Report Posted January 16, 2016 The Dewalt DW745. It was my first table saw and what really propelled me into getting halfway serious about woodworking. A very good fence, a great riving knife, great dust collection, and small enough to store away easily. I sold mine, but if/when I need another jobsite saw, I won't give it a second thought. 1 Quote
Immortan D Posted January 16, 2016 Report Posted January 16, 2016 I have a Bosch Jobsite saw similar to this one: http://www.amazon.com/Bosch-GTS1031-10-Inch-Portable-Jobsite/dp/B004O7FX20/ref=sr_1_1?ie=UTF8&qid=1452974524&sr=8-1&keywords=bosch+jobsite+table+saw with this stand: http://www.amazon.com/Bosch-GTA500-Folding-10-Inch-Portable/dp/B004U91EOS/ref=sr_1_5?ie=UTF8&qid=1452974524&sr=8-5&keywords=bosch+jobsite+table+saw For rip cuts, it is excellent. Very accurate fence (locks on both sides of the table). Other than that, try at your own risk. It's very portable with that stand, easy to store when not in use. All the accessories have a storage place built inside the saw. Quote
wdwerker Posted January 16, 2016 Report Posted January 16, 2016 I have an old Makita jobsite table saw. It's just a 7/14 blade model but with a good blade it makes clean cuts. Has to be over 20 years old and still going strong. I do take care of it and don't push it too hard since it's just for site work. Quote
jmaichel Posted January 16, 2016 Author Report Posted January 16, 2016 Thanks for the replies. I am going to go and look at all of the Models HD has to offer. I might be leaning toward the Ridgid R4513, just because it can fold up and comes with the stand. I am also considering a cheap 10" or 12" miter saw (non sliding). Again this will never be used for furniture building. Quote
sheperd80 Posted January 16, 2016 Report Posted January 16, 2016 The Dewalt DW745. It was my first table saw and what really propelled me into getting halfway serious about woodworking. A very good fence, a great riving knife, great dust collection, and small enough to store away easily. I sold mine, but if/when I need another jobsite saw, I won't give it a second thought. This ^ . Ive done alot with that little saw. Suprising power for its size too. And ive been throwing it in and out of my truck for 4 years and pushing it far beyond what a saw that size should be used for. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
jmaichel Posted January 17, 2016 Author Report Posted January 17, 2016 Thanks for all the help. I ended up getting the Ridgid 4513. I went back and forth between that and the Bosch, I just did not see a huge difference in saws for the extra $200 that the Bosch cost. Again I am not going to be a pretty limited use tool, so I tried not to overthink (which my wife says that I did anyway). I had considered going over to Woodcraft and looking at the Sawstop contractor saw but decided that was probably not a good idea. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.