Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Which plywood?

Featured Replies

Going to build some built-in book cases, and need to choose some paint grade plywood.

I am a bit confused about the paint grade selections at my local lumberyard.  I have two options that I am considering - a D3 domestic plywood (maple) and a C2 import birch.  Here is where it gets confusing.

The C2 birch is 18 mm, made from 11 plies, and is $10 cheaper per sheet than the domestic D3, which is made up of only 5 plies.

Why would the material labeled as higher grade, with more plies, be less expensive?

Import probably means made in china...more chemical off gassing, much higher likelihood it twists and warps on you.

My advice is you should go to your lumber yard, and take a look at them both. Last time I got the Domestic Birch, which I was told was better.... it was complete crap, and really expensive.  I recently ordered a bunch of pre-finished and it was very nice, and less than half the price of the crap domestic from the previous order!

if the D2 domestic is from Murphy ( somewhere in the Pacific Northwest ) it's pretty good stuff for the price. Joseph is right about the off gassing, twisting and warping. I would also keep an eye out for surface flaws that are hard to see until you put the first coat of finish on. Voids just under the face that turn into bubbles and craters are fairly common too. The import sheets can be useful for the right applications but bookcases tend to have sides that are going to be visible on both faces. Sometimes it is smart to get one sheet of B-2 for those double exposed face parts. 

I find that the quality varies from bundle to bundle at my HD and Lowes. I usually just find the plywood that looks the best and buy it.

I have found that the big box stores rarely have quality cabinet grades of plywood. This may vary by region and you have my sympathy if that's the only place you can buy. Ask local cabinetmakers where you can find the good stuff. The time and effort to cope with the shortcomings of poor quality ply are not worth the price savings in my opinion.

Some of the best ply for paint grade work is MDO or sign painters board. It's exterior grade very stiff and flat core covered with an extremely smooth layer of exterior grade MDF.  It's probably more expensive than most of the other options but it takes paint beautifully .

another thing to look for is the thickness of the top layer, as wdwerker mentioned the bad stuff wont show itself till its to late. thin layers and glue close under neath will affect stain or clear finish outcomes.

If you can get the true russian birch in the lengths you need, I would consider that.  Or there may be a domestic product that is similar, but I think you'd have to be very careful and make sure it's the "good stuff".  

I would not even consider big box stores for painted anything, period.

I wonder if a veneer plywood would be OK, even if you are painting it.  It's not cheap at all, but the stuff I have access to has a layer of MDF just under the veneer layer on both sides.  I don't know all the reasons why they do this, but I suspect it helps get a dead flat surface.

  • Author

so i went to the lumberyard, and took a look at the materials. the domestic stuff was full of voids in the plies, so i went with the important birch. it had almost no voids in the edges and ends that i could see, and it has 11 plies. looks pretty good for my purposes.

as an aside, i did some research on imported plywoods. they have a different grading system, and the "c" grade is their lowest grade. the surface of this ply is certainly nicer than "d" level domestic.

ill take some pics when i get started.

thanks for the advice fellas.

I haven't seen any decent plywood in the box stores for several years.  I have an edge of one here with writing on it from some I liked from Lowes.  It has stamped on the edge  3/4" Birch Carb 2 and has an arrow pointing to the "face".  It was as good as any 3/4" Birch I've ever bought, short of Baltic Birch.  The edges on it even took a decent finish.  I haven't  needed any in a good while, so haven't spent time looking for it.

The face veneer is thinner than ideal, but otherwise very stable and decent.  It's the only stuff I've seen with the arrow pointing to the face.  Both sides were better than average, but we did pick through the stack.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.