Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Crap plywood...:-(

Featured Replies

Made my crosscut jig a couple of years ago out of 3/4 big box store plywood.  I noticed some problems with it suddenly and started investigating.  I found voids, some long enough to see through, and separated lamination despite predrilling screw holes.  I am now on hold at the shop until I can get over and buy a sheet of 3/4 baltic birch. 

 

Jeff in KC

11220807_10208129555783871_2682043060111325928_n.jpg

12832454_10208129554623842_1910047876056125230_n.jpg

12832544_10208129555343860_2678348323929239808_n.jpg

Yep, that's garbage alright.  I bought some of that stuff once.  Exactly once.

Hmm that looks pretty good actually to me. :) Compared to what I see. But, I'm using it for shop projects so at long as it seems to stay flat I'm pretty ok with it. But man if I ever wanted something good.. I've heard from other local woodworkers I gotta drive about 150 miles to Des Plaines, IL to get good plywood at $100-150/sheet.

6 minutes ago, Cliff said:

Hmm that looks pretty good actually to me. :) Compared to what I see. But, I'm using it for shop projects so at long as it seems to stay flat I'm pretty ok with it. But man if I ever wanted something good.. I've heard from other local woodworkers I gotta drive about 150 miles to Des Plaines, IL to get good plywood at $100-150/sheet.

Ditto on the project applications.

Back in the 70s we college guys used to build speaker cabinets.  We would use marine grade plywood b/c voids always lead to vibrations.  But boy was that stuff heavy!  Today I can get the decent stuff @ WoodWerks (or WoodCraft) and they'll cut it to fit in my car for the drive home, which can be quite convenient.

  • Author
1 hour ago, JosephThomas said:

What were the problems that led you to investigate?

I made the deck out of a single piece, with a hardwood front and back boards or fences - pretty standard design.  I recently noticed that when I would slide a board along the hardwood fence it would catch at the cut.  I checked with my straight edge and one side was a bit taller than the other, which was odd as they were one sheet until that first cut.  I removed the screws that held the front and back fences and then noticed that one set of screw holes had developed a split. in the second picture in the upper right corner you can see one of the screw holes and the line through it.  That is the split in the lamination and it carries on to the right a couple on inches to the edge of the sheet that rides next to the blade.  As a result, the thickness of the one side was more than the other, non split, side.  the difference was on the order of 0.010 or so, enough to catch a board edge.

I also, with my straight edge, found that there were humps overlying the defect in the bottom pic.  I used my plane to remove it, but after finding the split lamination I am just starting over with a new deck.  Live and learn.  I almost bought a 4x8 sheet of ok looking big box ply a few weeks back ($30 for 32 sq ft 4x8  as opposed to about $50 for a 25 sq ft 5x5 sheet)..  Now, knowing what I know form dissecting this jig, I think I will only be able to use the better stuff even for shop jugs. 

 

Jeff in KC

 

I don't know why you have screws going into the edge of the plywood on a cross cut sled.  The fences go on top.  The runners go on the bottom.  If you are screwing the fence into the edge of the ply then there's no way to square it.  It's always better to screw through the face of plywood than into the edge.

  • Author
4 hours ago, JosephThomas said:
2 hours ago, krtwood said:

I don't know why you have screws going into the edge of the plywood on a cross cut sled.  The fences go on top.  The runners go on the bottom.  If you are screwing the fence into the edge of the ply then there's no way to square it.  It's always better to screw through the face of plywood than into the edge.

 

Well, because that was what the plan called for on the three penny crosscut sled (not all sleds use top mounted fences).

http://www.familyhandyman.com/tools/table-saws/how-to-build-the-three-penny-crosscut-sled/view-all#step1

You use the front edge of the TS top and your TS Fence as your straight edges when you drop the deck on the runners.  The 3/4 hardwood (white oak) fence then is screwed into the edge of the 3/4 plywood.  This squares the fence to the miter slots and the blade, as I had already squared the blade to the miter slots with my A-Line it kit).  I made mine as wide as my table and wings and put fences on both sides (front and back) (but it was not that deep).  Then, when you make your initial cut the cut slot is square with your miter slots and thus square with your front edge of the table.  It has made hundreds of square cuts, but once the lamination started to let go it needs to be replaced.

Its been two years since I made it.  I am probably going to make something similar, using a 3/4 top, but will incorporate some t-track and such so I can do angles and then some sort of fixture to do repeatable 45's.  I will also probably make it deeper to accommodate cross cutting 1x12's and such.

 

Jeff in KC

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.