Pwk5017 Posted March 8, 2016 Report Posted March 8, 2016 Looking to swap out the knives in my 12" G9860 and it looks like slim pickins for options. One, are all HSS knives basically the same? I admit full ignorance on the different types of steel for cutting edges. Two, who is the best supplier to go through for knives? I was under the impression infinity tools was the end all be all, but I don't believe they carry the size I need--12" x 1 1/8" x 1/8". This means I can buy the standard knives from grizzly for 50-70 bucks, the super-duper "best" Japanese knives from grizzly, or search for another third party source for knives. Nothing against grizzly, but I prefer not to buy my consumables from tool manufacturers. I wouldn't buy sawstop blades and I don't want to buy grizzly jointer blades if I have a choice. Also, the Japanese knives from grizzly seem to be double-ground, which I always thought was a big no no for jointers? It can help with tearout on planers, but the double-grind results in more bounce/chatter on the jointer. I swear I read that somewhere. I feel like this last part is an item specially suited to trip. I need Spagnuolo to throw up the trip sign. Quote
wdwerker Posted March 8, 2016 Report Posted March 8, 2016 Are the Japanese knives the Cobalt ones for $95 a set ? Quote
Tom King Posted March 8, 2016 Report Posted March 8, 2016 I buy jointer knives from Woodworkers Supply. They come with different brand names on them. I've never bought any "premium" ones, and I've never been able to tell much difference in them. Quote
Brendon_t Posted March 8, 2016 Report Posted March 8, 2016 I'm not sure about your knives but I couldn't find the size I needed at infinity so I called them. They did have them and I bought the hss set. Any particular reason for replacing them? I had a good set of carbide tipped knives that were pretty darn beat up. I built a sharpening jig a few nights ago and it worked great, took a while to get the dings out but they are very sharp again. Quote
Pwk5017 Posted March 9, 2016 Author Report Posted March 9, 2016 Here are the Japanese ones http://www.grizzly.com/products/12-Best-Jointer-Blades-Set-of-3/T10144 dunno if they are cobalt or not. I don't even know what cobalt is other than the color, car, and felder/hammer offer cobalt knives as an upgrade from hss. Not throwing the old knives out, but I want to send them off to be sharpened. I would prefer to keep my jointer running for the week that I will be knife less, so I want two sets to rotate in and out. I'm going to contact infinity and look at woodworkers supply Quote
Andy Wright Posted March 9, 2016 Report Posted March 9, 2016 Infinity is who I use for replacement knives Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.