Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

looking for a little info about older HSS TS blades

Featured Replies

i have 3 that i would like some info about. i got my zip code Craftsman and a bunch of blades when the Alzheimer monster rang my parents doorbell. can't ask questions of the original owner.  i haven't tried to use them but i am curious about their usage back in the day. one is a "28T chisel tooth". is the chisel referring to how it was sharpened? one is a "200T crosscut plywood" blade. (200T plywood blade? (crosscut, plywood?) the last is where i am completely lost - "hollow ground planer". looks like a dado blade kind of, has 16 teeth(?) between gullets and 4 teeth on each big tooth(?). any kind of description would be helpful. they are all sharp! one of the last things he did, before i got all the "dangerous tools". thanks for any insight!

Edited by ghost

Would the " hollow edge planer" be a hollow ground blade? They had no set to the teeth, but the rest of the blade was ground to provide the clearance that set would have. The make a really good cut, much like a carbide blade

But no HSS blade will stay sharp for long & you don't ever want to use them no stuff like MDF.

  • Author

you are correct. i edited my post - "ground" not edge. my bad, 

what would the "planer" part refer to? if you know.

 I have used the hollow ground blade with pine before..Great cuts but as drzaius said it doesn't stay sharp long...I think I picked it up at sears.

  • Author

Dad never saw a C-Man tool he didn't fall in love with! LOL

and these are most definitely out of Sears.

i wasn't planning to use these these, i just am unfamiliar with what they are labeled as. have a curiosity about them!

 Craftsman used to make a blade that would allow you to use your radial arm saw as a "surface planer", so its possible that's what you have.

$_1.JPG

 

200T plywood crosscut blade is to,be able to crosscut plywood faces with little chipping.

HSS blades can actually be sharpened to a much higher level than carbide can, but it won't last very long.

wow andy, that thing scares me just looking at it, and on a radial arm saw. probably designed by a guy in a padded cubical that had too many chemicals in it

  • Author

okay, that sounds reasonable.

Andy, that is a scary piece for sure. planing with a RAS? back when men were men!

dad didn't have a RAS but that doesn't mean he didn't buy a blade he wasn't familiar with. LOL

here is a pic of the blade

 

IMG_0649.JPG

it just threw me on a "Crosscut plywood blade". LOL

I think it was called "planer" to denote a very smooth finish, like from a plane. Hollow ground was the only HSS blade I ever used that would give a smooth cut. We've become spoiled by carbide blades (old fart reminiscing now)

The hollow ground blade was the smoothest cutting blade there was back before top quality carbide.  The blade is ground out on both sides between the teeth and a small flat area left near the arbor hole.  Place a straight edge across it, and it will be obvious.  That looks like an all purpose blade that has been sharpened rip.

The 28T was a fast, rough cutting blade.

A lot of small teeth work pretty good for a clean cut in plywood.

These were the only kind of blades I knew anything about up until the mid 1970s.  You'd put the blade in backwards, run the saw lightly hitting a Carborundum stone to joint it, and then sharpen with a Mill file.  Carbide tipped blades were too expensive for normal people to buy until later.

4 hours ago, treeslayer said:

wow andy, that thing scares me just looking at it, and on a radial arm saw. probably designed by a guy in a padded cubical that had too many chemicals in it

I have never used one or seen one of these planer attachments in operation, but they used the be made by several different companies when RAS were popular.

I could see it being useful and reasonably safe if used correctly. You would have to clamp the wood down TIGHT to the table then keep all of your limbs well clear of the RAS while you make a pass, then shift six inches and repeat. Its kind of like the router sled technique for flattening a slab of wood, only on steroids :)

I could also see lots of opportunity for ER trips if used incorrectly. That thing could chew off your arm from the elbow down in two seconds flat. That pretty much sums up the demise of the RAS - they are good tools if used correctly and I have always felt safe using one for cross cuts. Then again, I have never tried a rip cut (which just seems dangerous), or used any of the crazy attachments like the planer

  • Author

Thank's fella's, lot's of good info 

really appreciate it!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.