Popular Post gee-dub Posted June 5, 2016 Popular Post Report Posted June 5, 2016 I think this may be the right place for this. If not, feel free to move it. My shop can get a bit awkward when I am assembling a larger carcass. This means that I sometimes have to use space for a feed path that is less than ideal. For longer stock I have roller stands and other types of supports. I found myself in a situation where I needed something just a bit different. I was drum sanding a top and it was a bit troublesome to support at the outfeed end as it was feeding out over my tablesaw outfeed table. The only scrap I seem to have in the shop that does not have a home is the sort of thing I get from throw-away furniture that may have an amount of material I can reuse. These pieces just seem to snow-drift around the shop until consumed. This was an old TV stand from Ikea or the equivalent. I used a hinge from some other throw-away. The tablesaw outfeed table has this funky little vise that comes in handy for things (and I guess I just found one more). I clamp the new whats-it in the vise and gravity drops the leading edge. Now as my long stock comes out of the drum sander, I don't have to be a contortionist in order to provide some last minute support. Obviously this won't apply to everyone's shop but, it may trigger some ideas for others. 5 Quote
shaneymack Posted June 5, 2016 Report Posted June 5, 2016 Cool doo-hickey gee dub. Just curious, how big is your shop? Sent from my SM-N910W8 using Tapatalk Quote
Mick S Posted June 5, 2016 Report Posted June 5, 2016 I need to do something along those lines. Nice job and good (re)use of scraps that would otherwise be tossed. Is that a G&G something or other project on the sawhorses? Quote
gee-dub Posted June 5, 2016 Author Report Posted June 5, 2016 2 hours ago, shaneymack said: Cool doo-hickey gee dub. Just curious, how big is your shop? About 20x30 but, the washer, dryer and water heater share my world. 19 minutes ago, micks said: Is that a G&G something or other project on the sawhorses? Yes, It's a lowboy for my own home which of course means it gets worked on between other stuff. The high boy took me over 6 months to finish and I think this one will make that mark as well ? Quote
wdwerker Posted June 6, 2016 Report Posted June 6, 2016 I have 2 outfeed/assembly tables lined up and leveled for the same use as Gee-dubs. I use one of those Ridgid tilt top outfeed stands to catch the drooping end and prevent it from catching on the table edge. Serves about the same purpose as Gee-dubs ingenious ramp. Quote
..Kev Posted June 6, 2016 Report Posted June 6, 2016 Always pays off to have a creative mind in the shop! Seems we're always building a one time use jig, finding a way to support something, or trying to find a way to clamp something down.. Nice job! Quote
bleedinblue Posted June 6, 2016 Report Posted June 6, 2016 Such a simple idea that most of us wouldn't have thought of. This could easily be applied to other machines. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.