Recommended Posts

Posted

I like the hollow chisel because it the only machine that can do a single square hole. I have both the british pattern and the japanese pattern bits and like the british pattern for the flat bottoms. No one make the british pattern and so one has to get NOS off Ebay.  You can get long bit to cut 6" deep if you look. 

 

Now i thought that the 1/4" was the smallest the bit came in but StarM (the one LV sale ) sale as small as 3mm. that's smaller that 1/8". you can not get them in NA and i ordered from japan this little baby. How they can make them that small i do not know. 

 

3mm beside 18 gage brad nails

 

 

chisel%20005_zpstoykduei.jpg

 

[Ichisel%20007_zpsvcksdaku.jpg 

Posted
3 hours ago, TerryMcK said:

Interesting. What is the difference between British pattern and Japanese pattern?

 Terry later on tonight I'll post the difference between British pattern and Japanese pattern chisels as there's quite a remarkable difference .  What most people bye Today is the Japanese pattern and the best manufacture of those is  StarM  brand but generally the ones that come with grizzly or busy bee or delta even  Powermatic are Korean made and generally have a garbage metal    The standard fare are made with very loose tolerances  and thin walls .  British pattern chisels where/are hammer forged and I may even have an old video showing how traditionally they were made  in England up till around 2008 .  Obviously Scheffield England was the mecca   For their  manufacture but the US companies both forest and Greenlee produced the British Pattern  here in North America . 

 

 

 

 

3 hours ago, gee-dub said:

Wow.  That's a delicate mortise.  Do you use them decoratively for piercings?

In Japan these are generally used for Shoji screen .  In fact there is a couple of specialty morticing chisels that chop double Rowed mortices that I'll try to find pictures of this evening .  I find much of the Japanese tooling does not leave the country and show up here in North America not sure what that is ?

Posted
1 hour ago, Mike. said:

Do you have a source you can share?  I don't use my HCM much but when I do I need a good cut.  I did buy a couple of Lee Valley's higher quality chisels and they are much better than the cheap shop fox set I bought with my PM HCM.  

 

Hi Mike you can order here if you can pay in yen

http://www.ns-co.com/html/

 

 

here are the double chisels.

 

07241054_500e004338c40.jpg

 

07111541_4ffd20242b9ab.jpg

 

Posted

here is a look at the british pattern. There not as pointy as the Japanese  and do not have a center spur. Instead are double fluted  so the bit does not extend beyond the chisel tips.  you can drag the bottom with these with care.

chisel%20003_zpstddxu6qr.jpg

chisel%20002_zpsf1zgsxco.jpg

 

you can see the reamers for sharpening this type and i have see a lot the british pattern chisels ruined by those that use the diamond hone made for the jap pattern.

 

they cut way better in hard wood . You can see me punching a 1" hole on the mortiser here,

 

  • Like 1
Posted

Thanks for the explanation Jack. It appears that all of mine are indeed Japanese pattern despite me living in England. I'll have a look over at the few Sheffield tool makers left and see if they carry any.

Posted
4 hours ago, TerryMcK said:

Thanks for the explanation Jack. It appears that all of mine are indeed Japanese pattern despite me living in England. I'll have a look over at the few Sheffield tool makers left and see if they carry any.

Sorry to say the last chisel maker to go was was Clico in sheffield

 

great video of them making the Clifton planes and hollow chisels. below

 

https://www.toolsforworkingwood.com/store//store/more/met2012.php?v=v

3 hours ago, Chet K. said:

Jack is there some kind of gearing in the large cylinder that turns both bits on the double chisels 

it looks that way to me. I don't have one but the website said  they fit any mortiser.

Posted
7 hours ago, jack English machine said:

here is a look at the british pattern. There not as pointy as the Japanese  and do not have a center spur. Instead are double fluted  so the bit does not extend beyond the chisel tips.  you can drag the bottom with these with care.

chisel%20003_zpstddxu6qr.jpg

chisel%20002_zpsf1zgsxco.jpg

 

you can see the reamers for sharpening this type and i have see a lot the british pattern chisels ruined by those that use the diamond hone made for the jap pattern.

 

they cut way better in hard wood . You can see me punching a 1" hole on the mortiser here,

 

That's one bad ass mortiser! Op, can you give use an example of what you use the little fellers for?

he's obviously not a domino fan!

Posted
9 hours ago, K Cooper said:

That's one bad ass mortiser! Op, can you give use an example of what you use the little fellers for?

he's obviously not a domino fan!

Hi cooper. The mortiser is a chain chisel machine built by Stenner in England and dates from the late 50s. you swap in heads for what type tooling you want to run. I love chain mortising the most as it fast and clean. I wanted a slot mortise like the Domino so made a head to hold a router for it . The Stenner here is the only one i have ever seen surface in the world and trust there are many  looking for this machine. I got it for $250 a few years ago. I did spend a few weeks restoring it. 

 

Most of my work is Historic doors and windows but I do everything from timber framing to fine furniture, I do not copy and only do my designs and have done so for the last 12 years so no longer do work for other designers any more. 

courttard009_zps02308dbf.jpg

courttard008_zps5ac90657.jpg

 

courttard001_zpsc41c9b75.jpg

 

courttard003_zps1355cded.jpg

 

courttard004_zps8e2b7712.jpg

 

The Wadkin Temple AKA as the shop is our experimental building that we try our our designs for doors and windows. 

 

templedoor016_zpsd8609d1e.jpg

 

templedoor011_zpsa2e45dba.jpg

 

templedoor003_zpsea6c35e7.jpg

 

here is me cutting with chain

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.