collinb Posted June 28, 2016 Report Posted June 28, 2016 Went from 16awg to 10awg power to the table saw. Had been using 12 with the Craftsman so there was plenty of current available. But my first use of the Ridgid with 16 was just out of convenience. That definitely affected my perception of the saw's power. But last night I grabbed the 10 so now all is well. But I've just been cutting some pine & plywood. We will see next week how it works with oak. Quote
Janello Posted June 28, 2016 Report Posted June 28, 2016 What blades (s) are you running Collin? That can also make a big impact. Quote
gee-dub Posted June 28, 2016 Report Posted June 28, 2016 Good info collinb. Proper connections not only let a tool perform as designed but, prevents premature wear or failure as well. Its nice when a tool is working at optimum performance; the whole world looks better. Quote
collinb Posted June 28, 2016 Author Report Posted June 28, 2016 59 minutes ago, Janello said: What blades (s) are you running Collin? That can also make a big impact. I used both a thin kerf Freud and a heftier 40-tooth rip blade. Same results on both ends. Quote
Janello Posted June 28, 2016 Report Posted June 28, 2016 Your saw won't work as hard with a good quality dedicated rip (glue line) and crosscut blade. But, that also means you'll be changing out blades for different operations. I've become accustomed to swapping blades rather than using a combination blade and it doesn't bother me at all. Better results and saw doesn't work as hard. 1 Quote
Chet Posted June 28, 2016 Report Posted June 28, 2016 21 minutes ago, Janello said: Your saw won't work as hard with a good quality dedicated rip (glue line) and crosscut blade. But, that also means you'll be changing out blades for different operations. I've become accustomed to swapping blades rather than using a combination blade and it doesn't bother me at all. Better results and saw doesn't work as hard. I am in the same routine as John. At first I was wishing I had gone with the combo but now it has become second nature to swap to the blades. Quote
wdwerker Posted June 28, 2016 Report Posted June 28, 2016 Cleaning those blades frequently helps a lot. It really does increase the time before it needs to be sharpened. I clean at the first sign of resin building up . Quote
RichardA Posted June 29, 2016 Report Posted June 29, 2016 Strange.... I told my wife an hour ago, I need to clean a couple of saw blades in the morning! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.