StuffiMade Posted June 30, 2016 Report Posted June 30, 2016 Making this simple table for my four year old daughter so she has somewhere to put her bedside torch at night. Just have to round over the sharp edges on he top and the bottom of the legs, final sanding, glue up the base, attach the top to the base, and then finish with a water based poly. I have only been doing this a few years now but its very satisfying! This is the first table top i have jointed together, Milled all the wood from rough sawn timber. 2 Quote
wtnhighlander Posted June 30, 2016 Report Posted June 30, 2016 Nice job on the top! Is the table complete, or do you plan to do any further shaping, like tapering the legs, or doing an edge profile on the top? 1 Quote
..Kev Posted June 30, 2016 Report Posted June 30, 2016 Welcome to the forums. Looks like good tight joinery! 1 Quote
StuffiMade Posted June 30, 2016 Author Report Posted June 30, 2016 1 hour ago, wtnhighlander said: Nice job on the top! Is the table complete, or do you plan to do any further shaping, like tapering the legs, or doing an edge profile on the top? Thanks! Nope its go a bit more work to go, i did think about a taper on the inside corner of each leg. As for the top, i am going to rounder over or chamfer the edges and corners. I also recently bought myself some carving chisels so maybe a small detail in the top towards one corner, not sure on this though. Its all dry fit at the moment. 1 Quote
mat60 Posted June 30, 2016 Report Posted June 30, 2016 Nice work on the table..I bet she will like it.. 1 Quote
weithman5 Posted June 30, 2016 Report Posted June 30, 2016 welcome to the forum what are you letting your four year old have a torch for? (just kidding, I understand the lingo in the UK) 1 Quote
StuffiMade Posted June 30, 2016 Author Report Posted June 30, 2016 32 minutes ago, weithman5 said: welcome to the forum what are you letting your four year old have a torch for? (just kidding, I understand the lingo in the UK) She's a pyromaniac 1 Quote
Coop Posted July 1, 2016 Report Posted July 1, 2016 14 hours ago, StuffiMade said: Thanks! Nope its go a bit more work to go, i did think about a taper on the inside corner of each leg. As for the top, i am going to rounder over or chamfer the edges and corners. I also recently bought myself some carving chisels so maybe a small detail in the top towards one corner, not sure on this though. Its all dry fit at the moment. As for the taper, unless you already have a jig and it wouldn't be too difficult, let it go on this one and consider it on the next. IMO, great as it is + the round over or chamfer. 1 Quote
StuffiMade Posted July 1, 2016 Author Report Posted July 1, 2016 3 hours ago, K Cooper said: As for the taper, unless you already have a jig and it wouldn't be too difficult, let it go on this one and consider it on the next. IMO, great as it is + the round over or chamfer. Thanks for the advice! I don't have a jig, but i do have a few ideas for one. Maybe next time. I will post pictures and a link to the build video on here when its finished. Quote
Popular Post StuffiMade Posted July 4, 2016 Author Popular Post Report Posted July 4, 2016 Finished, thanks for the tip on chamfering the legs, used danish oil and bees wax in the end. 4 Quote
Popular Post StuffiMade Posted July 4, 2016 Author Popular Post Report Posted July 4, 2016 Just now, TIODS said: Turned out great! Thanks! She's happy 4 Quote
treeslayer Posted July 4, 2016 Report Posted July 4, 2016 i like it, simple, clean lines, well built, great job man, instant heirloom 2 Quote
Popular Post shaneymack Posted July 4, 2016 Popular Post Report Posted July 4, 2016 Awesome job! It's a great feeling to build something for your child and they love it. Way more rewarding than building something for a paying customer! Sent from my SM-N910W8 using Tapatalk 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.