mat60 Posted September 3, 2016 Report Posted September 3, 2016 I have 750 BF or more of 4ot maple and oak air dried for 3 years. Now I always have bought KD but I'm wondering how dry it may be by now? Its been undercover and its free from a in-law that has a saw mill. This will be a great help to my wife and I to get the store filled up this fall and winter. I'm Happy and cant wait till next friday when it arrives.. 1 Quote
mat60 Posted September 4, 2016 Author Report Posted September 4, 2016 I was excited about this but it could end up being 500bf of crap. In that case I will make some small chit that I can sell for $29.95. Maybe some rustic stuff. After all it may pay the bills. I no its just maple and oak but my in-law is moving his sawmill and doesn't use it. I do have a moisture meter. Thanks Steve. Just wasn't shore how long it takes to air dry. More than 3 years I bet. Quote
wdwerker Posted September 4, 2016 Report Posted September 4, 2016 Rule of thumb is 1 year per inch of thickness. Quote
Llama Posted September 4, 2016 Report Posted September 4, 2016 11 minutes ago, wdwerker said: Rule of thumb is 1 year per inch of thickness. Wait, I'm only two years old? 1 Quote
mat60 Posted September 5, 2016 Author Report Posted September 5, 2016 I also been wondering today. Has anyone be given free wood? Kind of makes me feel funny. Quote
Llama Posted September 5, 2016 Report Posted September 5, 2016 I've given some wood for free... 2 Quote
Cliff Posted September 6, 2016 Report Posted September 6, 2016 I've been working with some ash that is air dried, $1/bf. And it's fine except that even though it's 4/4 rough, it was so improperly dried that you can't get 3/4" out of it. So I have to use way more stock than I should. It is what it is. I think if it was properly dried then it would have been way better - but it also would not have been $1/bf. I'd not turn down 500bf of anything. At the very least I'd use it to practice hand cut dovetails. 2 Quote
mat60 Posted September 18, 2016 Author Report Posted September 18, 2016 Well. Didn't turn out so good.LOL Hand cut dovetails it is Cliff. I was given 400bf of twisted, couped, checked, full of knots, sand and plenty of thick and then. I spent 2 days wire brushing, belt sanding, planing to clean it up. I will make some small stuff with it. All good. .I will belt sand the edj before it goes in the jointer. My plainer took hell. No more free wood. Quote
mat60 Posted September 19, 2016 Author Report Posted September 19, 2016 Don't mean to sound ungrateful. After all it was free and I will use some of on small tables and such that I can sell inexpensively in the store when I don't have other work. I also can burn what I cant use in the wood stove. The oak is about 15 percent moisture content. If someone gave you this free oak would you take it ? Quote
treeslayer Posted September 19, 2016 Report Posted September 19, 2016 i kind of sounds like you're answering your own question mat, sometimes its more work than its worth. if it were me i would burn the most unusable stuff and keep the rest, twisted is the worst IMO, followed by cupped. if you can get 1/2" thickness out of it maybe small projects. 1 Quote
rodger. Posted September 20, 2016 Report Posted September 20, 2016 It's only a good deal if it's something you want! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.