Recommended Posts

Posted

What is the best place to send blades for sharpening? I'm most interested in places that guarantee precision across the length of the blade. I had to return a new set of blades after installing them and noticing a 3-5 thousandths deviation across 12". 

Posted

I could understand you wanting closer tolerance for a planer but what you have for your jointer is certainly flat enough to now be able to run thru your planer. No?

Posted

It may have been more than 5 thousand, I don't remember exactly. It was enough that the supplier sent another set and took the other back. I think 5 is my cutoff. I don't need perfect, but if my table saw was out .005, that wouldn't be good enough. That is why I don't consider a .005" good enough. I want my machine calibration to be as good as I can possibly manage.

 

I thought of forrest, I think i will reach out to them and see what they guarantee. 

Posted

I have the same problem with my 12 inch jointer knives.After three different saw services i decided to do them myself on my tormek.I have three different Steels i use M2,T1 and opti steel.It takes 3 or 4 hours depending on beat up the edge is.

That would be great news to my ears if Forrest comes through. I like their saw blades.

Good luck please share if they do a good job.

Aj

  • 3 weeks later...
Posted

I ended up contacting several sharpening services, and the vast majority of them responded with "huh? never been asked this question in 100 years of being in business". This is coming from Forrest too, who i always thought went through painful amounts of detail to check and sharpen every tooth, straighten bent blades, etc. I understand woodworking isnt incredibly precise, but i make the craft imprecise enough. I dont need my machines to be sloppy and add to my inherent imprecision. At the same time, i cant expect a sharpening to give me 4 starrett rules with a honed edge for $40-50. Of all the people i contacted, Sliver's Mill engaged me with the most discussion. They forwarded me on to their sharpener, who seemed to be the real deal. We discussed measuring flatness, and he finally asked what i would consider to be acceptable. I said 5 thous over 12" is good enough for me. Is this an outrageous ask? I returned a set of new blades for being 5-10 out. My current blades are set to 2-3 from one another. This 2-3 accounts for the deviation in each blade too. I will wait on Sliver's Mill to get back to me about their tolerances, but it seems like sharpeners dont care and i should just go to my local sharpener. This place does industrial bandsaw blades and all other manner of metal/woodworking sharpening. They will probably charge me $10, and they will be "good nuff". It all comes back to should i care if my jointer blades have a .010" deviation over 12"? It also made me want to measure my byrd 20" cutterhead. This may be another selling point of the byrd head--machining tolerances. If my jointer blades cant be guaranteed to 5-10 thousandths, then what should you expect in a 20"+ blade after sharpening?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 68 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined