Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HVLP Question

Featured Replies

I have been intending to get a Fuji Mini Mite 4 when the time comes to get a sprayer. I just recently found the Sprayfine A401 which is very comparable to the Fuji, but $250 less. The Fuji uses a non-bleeder gun and the Sprayfine uses a bleeder. Everything I can find about Sprayfine is automotive related and sounds like a good setup.

Can a bleeder gun work for woodworking as well as a non-bleeder? Does anyone here know something about Sprayfine?

I am also looking into getting an HVLP setup.  From what I've read,  bleeder guns are often not desired because they blow air all the time, which can stir up and blow around a lot of dust.

Bleeder guns blow! Think if it like blowing an air compressor while finishing. While spraying if you accidentally point your gun at a previously sprayed area - bad. Point it anywhere in your dusty shop - bad. Sure you can try and be careful but it's tough when the gun is blowing air constantly. 

I have an earlex spray station (5500 I think) with a bleeder gun, and it works great!  I spray mostly water borne poly, but have also sprayed lacquer with it.  Does a wonderful job.

  • Author

I am sure that finishing will be my worst trouble spot once I get my shop running. I guess a non-bleeder would be a good idea for me.

12 minutes ago, Pug said:

I have an earlex spray station (5500 I think) with a bleeder gun, and it works great!  I spray mostly water borne poly, but have also sprayed lacquer with it.  Does a wonderful job.

 

I looked at the 5500 after reading your post. I've 99% decided I am going with a 4 stage system. I couldn't find anywhere how many stages a 5500 is, but with 2.2 psi, I'm guessing it's a single stage.

3 minutes ago, freedhardwoods said:

I am sure that finishing will be my worst trouble spot once I get my shop running. I guess a non-bleeder would be a good idea for me.

I looked at the 5500 after reading your post. I've 99% decided I am going with a 4 stage system. I couldn't find anywhere how many stages a 5500 is, but with 2.2 psi, I'm guessing it's a single stage.

Think so (single stage).  I did a review s while back, but Marc's is far better.

I might know where you can get a Minute-Mite 3 cheap:(!

  • Author
8 hours ago, K Cooper said:

I might know where you can get a Minute-Mite 3 cheap:(!

I saw what happened in your "It Ain't Pretty" thread. Don't sell it yet. I'm sure my first tries will be worse than that.

Thanks freed. Just joking about selling. There's more practice with this thing in the future!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.