Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Filing in cracks in wood blank.

Featured Replies

Hey Guys,

I am filling in some cracks on a board that is going to be a cutting board. I am using 45 minite epoxy mixed with some cherry wood stain for coloring. It is taking for i watched it for 3 hours adding more epoxy as it drained into the crack. This morning the crack is still there, I am assuming the epoxy just drained into the crack.

 

My question is should i fill in with more epoxy? Or can i switch to a type 3 wood glue mixed with stain? Would it hold up to the abuse of a cuttingboards life? 

 

Thanks

maybe try some very fine cherry sawdust mixed with the epoxy, is it a large crack? it could be time to think about cutting the crack out if you can.

Apply a piece of tape across the bottom of the crack. Don't try to fill the crack all at once. Dave's suggestion of fine cherry sawdust might help thicken the epoxy. Let it dry & cure in a warm place. 

  • Author

Black graphite? I have never heard of it. I will take a look. Do you think it would hold up to the beating that is received by cutting boards?

12 hours ago, SawdustHappy said:

Black graphite? I have never heard of it. I will take a look. Do you think it would hold up to the beating that is received by cutting boards?

I really don't think it will decrease the strength of the epoxy.  I took this recommendation from someone on this board for a table I recently completed and sure liked the look of the results.

  • 2 weeks later...

I use ca glue for cracks with great results.  On a deep crack I use medium viscosity, fill the crack two or three times then spray the dryer on the glue.  That seals it up and stops the absorbtion of the glue.  This works particularly well on dark wood finished with oil.  The repair either dissapears of becomes an nice feature.

On 3/10/2017 at 8:30 PM, KenMasco said:

I use ca glue for cracks with great results.  On a deep crack I use medium viscosity, fill the crack two or three times then spray the dryer on the glue.  That seals it up and stops the absorbtion of the glue.  This works particularly well on dark wood finished with oil.  The repair either dissapears of becomes an nice feature.

Agreed.  The Fastcap 2P-10 stuff is fantastic IMHO.

  • Author

With CA glue, is it possible to mix with with a color? Or black graphite? I am thinking of making it more of a feature that way. 

Also, where can I get black graphite?

Thanks again for all the help! Now if I can just keep stuff from cracking I would be ao happy!

  • 1 month later...

Have you considered cutting that section out and filling jt with an uinteresting shape and a maybe a contrasting wood? Like a butterfly key

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.