Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

That lovely feeling...

Featured Replies

...as you're sanding away the lumpy orange finish (badly applied danish oil?) from the top of the solid oak lamp table you just picked up on gumtree...and then discover it's only partially solid oak, with veneered chipboard panels in a solid frame...and you've just hit chipboard on a panel corner :angry:. I'd have probably realised it was veneered on a larger sized panel.

I've managed to rescue the corner to a satisfactory degree by carefully gluing a hand plane shaving of oak from a a block I had lying around and carefully sanding it down to blend it in. I'd be annoyed as hell if we'd payed proper money for it but as it is it's a pain but it will serve a purpose for the time being.

Wow nice save, i would have never even thought of that. Pics?

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

Now the trick is how do you practice finishing the repaired spot ? It's likely to finish differently.  A careful touch up might be needed to make it blend in.

  • Author
1 hour ago, wdwerker said:

Now the trick is how do you practice finishing the repaired spot ? It's likely to finish differently.  A careful touch up might be needed to make it blend in.

yeah..I'm scratching my head on that one - also based on the rest of the piece is definitely more 'orange' than the top now - think I'm going to need to get some orangey-er oil than what's currently on my shelf (Morrells eze-oil) or it's going to need about 15 coats! :blink: The top isn't exactly consistent anyhow as I stopped as soon as I realised what I was dealing with so it's going to be a bit of work to even it out a bit more.

I'll try for a pic or two tonight - it's not perfect but it's a lot better than chipboard!

as far as technique goes I took inspiration from the way they apply leaf metal to statues etc - I applied a very thin but even coat of glue (you don't want any squeeze-out) to the chipboard then applied the shaving with the grain running the same way as the veneer, weighed it down with a bit of rubber and a weight then once dry carefully shaved excess off and wiped down the edges with oakey 320 grit 'between coats' paper - being careful to wipe from the shaving to the veneer to avoid lifting the edge.

Can you make it part of or to resemble a knot?  I get that a lot of folks on this forum have no use for the "distressed look" but...

(And in retrospect, could you have sensed by the weight that there was a lot of particle board?)

  • Author

I don't think weight would have tipped me off - it's still pretty heavy for it's size  - we have several other pieces from the range and they're all solid so that definitely didn't help.

Here's a couple of photos - it's not a perfect job by any means, with hindsight a thicker shaving might have worked a bit better as it would be less transparent. I'll probably get in there with a dark brown pencil to reinforce the grain a bit and blend it a bit more.

 

20170313_192702.jpg

20170313_192716.jpg

I like the pencil idea.  The light color (looks pretty much like natural oak, to me) seems like a challenge!

 

I have cut the grain lines into a patch of filler with an Xacto knife and then refilled with a darker filler. Probably not the best approach for your patch. Maybe scratch lightly and color the scratch with colored pencil ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.