Marmotjr Posted April 9, 2017 Report Posted April 9, 2017 So usually I just clamp a DC hose to the underside of the bandsaw, and catch what I can. But yesterday, I ripped down some 6"x1/8" veneer from some boards, and that created a LOT more dust than normal. So now I need to rig up some sort of DC to catch more. It's a Connover 10", so I won't find any aftermarket stuff for it anywhere. How do you guys rig your DC? In theory where is the best place to catch the dust in a bandsaw? Quote
wtnhighlander Posted April 9, 2017 Report Posted April 9, 2017 Rob Cosman has a fairly recent video on DC for bandsaws. Ideas seemed pretty good to me. Sent from my LG-H900 using Tapatalk 1 Quote
krtwood Posted April 9, 2017 Report Posted April 9, 2017 Directly under the table. You can split it off and collect from there and the lower wheel. Even with just a shopvac you can get most of it if you can get it right where it's coming out through the table insert. That actually worked better than everything I tried with my 1.5 hp DC, until I went up to a 5 hp cyclone. Quote
gee-dub Posted April 9, 2017 Report Posted April 9, 2017 Yep, right under the table. On smaller machines the solution is sometimes only sort of elegant . . . I always thought this was cool but, couldn't make a decent version for my little 10"saw (shown above). 1 Quote
Pwk5017 Posted April 10, 2017 Report Posted April 10, 2017 I have a homemade 4" port crammed as close as possible to the blade under the table, and then factory provided 4" port in the lower corner by the wheel brush. Surprisingly, the collection is really good, maybe 80-90%? I usually end up with some fines leftover on the table, but anything over 75% is really good on the bandsaw. The newer euro models have better design around the lower blade guides that help much more, im sure. On the smaller bandsaws, i would use a shopvac just under the table by the blade. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.