Recommended Posts

Posted

I need good task lighting on my bandsaw and drill press. Magnetic base would be my best option I think and I'd like LED as I'm converting the shop over anyway. Suggestions?

Posted

I use 18650 LiIon batteries in my flashlights . We often clamp some sort of jury rig to light specific tasks. I also use 100watt equivalent led spotlight bulbs in those architects style swing arm lamps. I get them from the dreaded IKEA for around $20 each. You can usually see them in any post of my shop.

  • Like 1
Posted

All of mine are cheap with good LED's in them.  I think most came for Lowes, or Home Depot.  Here's a really portable one.  It's a little battery powered LED from HD.  This could also go in the non-measuring thread.  All the center muntins were batch cut to the same length with a stop block, and the outer muntins all individually marked, and cut to fit.

windowsold46_001.JPG

Posted

On that job, I had Whiteside make a set of six custom router bits-they don't make singles any more, but sent me somewhere else for a following job.  I had 38 sash to make for that job.  I go into pretty good detail if you scroll down on the windows page of my website- you might find something useful for your job there.  

 If I need to make one sash, or a few, I'll cut the cope with a jewelers saw.  I have a couple of coping planes, but never came close to finding one for any particular profile I needed, so I've never really used one, except for playing around with.  

The sash I make are exact replicas of originals in houses I work on, down to matching sizes of mortises and tenons, so close isn't good enough, and stock sash bits have never worked for anything I've needed.  There is a picture on my Windows page that shows an old sash that we made some new parts for.  The replacement parts were the same parts that the replacement windows were made with.

  • Like 1
Posted
On 6/19/2017 at 2:11 PM, BonPacific said:

I use old-school drafting lamps all over my shop. I have 1/2 holes drilled into most benches, and glued some mounting blocks to my stationary tools. I can drop the light in or pull it out easily. My bandsaw even came with a perfect hole in the table already. These were $7 a piece when I bought six from Ikea, now they cost $9 a piece, but having a half dozen available is really nice. I think I got the idea originally from an old Machinist I had talked to.

tertial-work-lamp-white__0487646_PE62266

This, very much this.  I have a few around my shop, with the same mounting setup.  Half inch holes everywhere.

Most of the mounting points for the lamp have a second hole drilled near it so I can mount a similar shaped arm made from wood to hold a small diameter DC hose in very specific places. 

Posted
5 minutes ago, Marmotjr said:

This, very much this.  I have a few around my shop, with the same mounting setup.  Half inch holes everywhere.

Most of the mounting points for the lamp have a second hole drilled near it so I can mount a similar shaped arm made from wood to hold a small diameter DC hose in very specific places. 

Nice idea. I've removed the light from one of the arms, and have a cellphone mount which I can use to hold a cutlist/picture or as a camera if I want to film something.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined