Popular Post Marmotjr Posted August 6, 2017 Popular Post Report Posted August 6, 2017 Starting a new Job on monday in a high high end wood shop. They claim to be one of the best in the world for what they do, and looking at their portfolio, I believe it. I'll probably be starting in the assembly area, and eventually transitioning over to the metal fab shop. I won't mention their name, but those who know can probably easily figure it out. So for those who have worked in such shops, do you have any recommendations? Survival tips, etc? 4 Quote
wdwerker Posted August 6, 2017 Report Posted August 6, 2017 Good luck with the new job ! I've never had a job in any other shops than my own. Over 40 years ago my last job was as a clerk at a hardware store. I'm curious why the metal fab shop ? Is that where your experience & skills are ? Quote
Marmotjr Posted August 6, 2017 Author Report Posted August 6, 2017 I have some experience in metal working, TIG and stick welding, basic fabrication. Nothing overly amazing, they are just looking to expand that part of their business as they out source most of that work, and would like to bring it in. Steve, I know you run a shop, I doubt of this size (but of that caliber I've noticed), what do you expect to see in a new hire? Quote
Popular Post davewyo Posted August 6, 2017 Popular Post Report Posted August 6, 2017 I would be looking for someone who is coordinated, learns from observation, helps out where needed without being told, shows up on time, and doesn't mess things up. Covering my work while I'm on vacation is incredibly helpful but not necessarily required. Asking questions is always good. Also it is important when you work in a shop with other people that you observe basic shop etiquette. Don't use other people's gear without asking. Don't leave your tools all over the place. Don't monopolize the equipment. Don't use the last of something and not order more. Don't use up consumables and not refill. Don't be the jerk who is only thinking of himself. etc., etc., etc. 8 Quote
mat60 Posted August 6, 2017 Report Posted August 6, 2017 Congrats man. I dont think you have to worry just do the best you can and enjoy. You can tell us how much you like it next week. Quote
wdwerker Posted August 6, 2017 Report Posted August 6, 2017 I'm kinda different than most shops. We don't start at the crack of dawn but depending on workload we might work late. The biggest thing I look for is someone who can recognize something that needs to be cleaned or organized and doing it when they aren't busy. Futzing around waiting to be assigned a task just doesn't cut it. But life in a 2 man shop is way different. 1 Quote
Popular Post Tom King Posted August 6, 2017 Popular Post Report Posted August 6, 2017 The most basic principle of building anything: Do something that needs to be done. Days pass much faster if you stay busy. When producing work, you need to stay busy all the time. Always be thinking about what you need to do next. After building stuff for a living for 44 years now, that has become ingrained so much that I have a hard time remembering what I did yesterday. If you want to know what we did today, you need to call me tonight. I'm always thinking about what we need to do next. Multitasking is concentrating on doing the best job you can with what you are doing with your hands right now, while planning how you're going to do the next thing you need to do. Building anything is all about efficiency. Saving foot steps is one of the most important parts of efficiency in building something. If you can't think about what you need to do right now, do something that needs to be done. It might only be moving parts closer to where they will be needed next. It's not about getting in a hurry. Getting in a hurry leads to mistakes. Mistakes lead to getting hurt. Efficiency is completely different than getting in a hurry. 6 Quote
Popular Post woodbutcher74 Posted August 6, 2017 Popular Post Report Posted August 6, 2017 Good luck on your new job. The first few days at a new job are always kinda tough. The company I work for has hired a few apprentices lately. One piece of advice I could give is leave your cell phone in your car. I know I probably don't have to tell you this. These "kids" spend more time staring at their phones than listening to the senior techs and seem like they already know everything. Most of them probably won't be around long. 5 Quote
Popular Post Marmotjr Posted August 7, 2017 Author Popular Post Report Posted August 7, 2017 Well this should be an interesting place to work. Walking in the door, I about banged my shin on about 100 bf of 4/4 ebony (the real stuff I am assuming), stacked right beside that was another 100bf or so of ebony veneer. Place looks like the lumber section at Home Depot, One whole aisle for sheet goods, and another for veneers, with a healthy mix of domestic and exotic. And that's not even the mill, the rough lumber is kept and milled in a building across the street, each one probably 20,000 sq ft (maybe more). All high end custom work, the assembly area where I'm working, they recreate the rooms they are building, assemble and fit the panels and cabinetry, and then take it all apart and ship it to the location, and the install team does it from there. Really kinda odd seeing pocket holes, dominos, butterflies and dovetails all being done on the same project. They have another "room", about 20x50', 16' high, that is a mockup of a room in a 18th century house, all the original panel work has been removed from the building,shipped here, and they are restoring it to be shipped back. 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.