Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How do I match an existing look/texture?

Featured Replies

I recently refinished an oak table. But because of an accent I added to the leaf section I have now a smoother surface than the rest of the table which is meant to be a "rough" look with deeper grain. How do I return the leaf piece back to the rougher/deeper grain look after sanding too smooth?

  • Author

It's a bit difficult to see but if you look closely you can see a slightly different look to the finish of the middle section (about 16" W). Too much sanding made it too smooth resulting in a diff look. I prefer the rougher look like the rest of the table.

20170802_135349.jpg

Not sure there's much you can do about that at this point short of sanding down the entire table and making it consistent.

I can't even see what you're talking about...I wouldn't worry about it.  Start working on the next project. :)

  • Author

Well, like I said, it's difficult to see in the picture but the table sits in a very sunny area of my kitchen and it's pretty obvious when the sun is out. I do however, like your thought process; let it go and move on to the next project. But you know how it is when it's something you will see every day, several times a day. I guess I just want to raise the grain and open the pores like it was before I got overzealous with the sander. The thought of re-sanding the entire table will drive my husband to a month long fishing trip, if not longer, far far away. Wouldn't be so bad but I need help moving the table. Lol.

  • Popular Post
9 minutes ago, KC2 said:

Well, like I said, it's difficult to see in the picture but the table sits in a very sunny area of my kitchen and it's pretty obvious when the sun is out. I do however, like your thought process; let it go and move on to the next project. But you know how it is when it's something you will see every day, several times a day. I guess I just want to raise the grain and open the pores like it was before I got overzealous with the sander. The thought of re-sanding the entire table will drive my husband to a month long fishing trip, if not longer, far far away. Wouldn't be so bad but I need help moving the table. Lol.

One thing you could try before calling it quits or taking drastic measures...try putting one more coat of satin finish over the entire table and see if that evens things out.  It might work, it might not...but it would be a whole lot easier than a complete refinish.

  • Author

Yes, that too crossed my mind. I decided to take a stiff wire brush to it (with the grain of course) in an effort to recreate some grain texture. I found it lightened some areas so I put some stain on to bring back the color. It's drying now. Not sure how well stain works over poly but am hoping some will settle into the brush grooves enhancing the grain pattern I'm trying to achieve. Once I get the color I like I plan to put a final coat of poly on. Think it'll work?

On 8/23/2017 at 5:07 PM, KC2 said:

 The thought of re-sanding the entire table will drive my husband to a month long fishing trip, if not longer, far far away. Wouldn't be so bad but I need help moving the table. Lol.

I like your attitude! He could probably use the time away and you could probably use the solitude. Get the pool or yard guy to help you move it;)!  Good luck with your project and welcome to the forum, even if it is maybe only short lived. 

  • Author

Thanks everyone for your help. I've been a carpenter for over 25 years but most of the finish work (paint, stain, poly, etc.) was done by another crew. I just built the stuff so I don't have much experience in finishing techniques. I may be on this forum more often than expected. Btw, the table top is still in the drying phase. Have my fingers crossed it turns out as planned.

KC2, this is a great place to get advice so you can't come too often :D  Like Eric, I can't see it, but if it's going to drive you crazy, then a reasonable amount of effort to repair is worthwhile.  However, after fussing with it a bit, if you don't like the results might I suggest a nice set of curtains for the window? LOL

On 8/23/2017 at 5:07 PM, KC2 said:

Well, like I said, it's difficult to see in the picture but the table sits in a very sunny area of my kitchen and it's pretty obvious when the sun is out. I do however, like your thought process; let it go and move on to the next project. But you know how it is when it's something you will see every day, several times a day. I guess I just want to raise the grain and open the pores like it was before I got overzealous with the sander. The thought of re-sanding the entire table will drive my husband to a month long fishing trip, if not longer, far far away. Wouldn't be so bad but I need help moving the table. Lol.

Beer and a good looking neighbor, will get it moved for you, while the husband is away.

32 minutes ago, RichardA said:

Beer and a good looking neighbor, will get it moved for you, while the husband is away.

And a divorce.....hehehehe

 

-Ace-

  • Author

All very insightful suggestions...All of which, including a big bon fire, have entered my mind. Unfortunately good looking neighbors are hard to come by in this neck of the woods. ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.