Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Patches on Plywood Veneer

Featured Replies

This is my fist major cabinetry project, I am building a custom arcade cabinet out of walnut plywood.  Overall I am very happy with the project.

So, being new to the game, I have lots of "opps" moments, and looking for some advice on how to clean up.  As you can see from the pics, some parts of the veneer had been either chipped or nicked.  I tried putting some wood putty on, but when I sand down, it just sands away and the imperfections show.  I plan on just putting 3-4 coats of poly on the wood, I don't plan on staining it. (check out the attached pics).

Looking for some advice on how to tackle these spots?  It there any type or markers?  Or maybe I try the putty again and just lighlty sand?

Any help is greatly appreciated.  Put lots of hours into this so I want it to look nice.

Thanks again!

 

IMG_4599.JPG

IMG_4598.JPG

IMG_4597.JPG

Unfortunately there is no way to repair damaged skins on plywood.  You can try coloring and filling but any fix is only gonna be some level of bad.  I've moved away from using ply for this very reason (among others).  Even the slightest burn-through pretty much ruins the piece, and it's very easily damaged.  Ply is obviously a very logical choice for something like your arcade game...but you have to be extremely careful during the entire build not to cause any damage.

If that damage is on the show side I would consider covering it with additional trim.  There is no fill (wax filler, paste, witches brew, whatever) that is going to handle those spots without screaming "patch job".  Consider some thin trim, milled with a soft bullnose from walnut and attached with adhesive.

Media Cabinet (161).jpg

With no stain any repair will always show.  I have used water based wood fillers by mixing different colors until I matched the background then very carefully sanded almost flush,( if you sand flush the edge shows sharply) then I scraped the grain lines across the patch and filled those with a darker filler and sanded almost flush again. But it's carefully airbrushing the stain in that area that makes the whole thing disappear.  There are " burn in sticks" that professional furniture repair people use but they take an artists eye to mix and blend just right. 

Laying a sheet of veneer over that whole face or replacing that section is probably much more practical in the long run. Maybe you could add a piece of 1/4 walnut ply over that face and cover the edges with solid walnut trim.

I've been in your position and there is no easy way out.  

Good luck !

I completely agree w/ those who've said that whatever you do in terms of filler/color/etc it's going to look bad. Like gee-dub, what I would do is decide on some kind of overlay in a thin contrast wood and do it symmetrically so that it looks like a design decision. Likely will require some thought but should be workable.

10 hours ago, wdwerker said:

they take an artists eye to mix and blend just right. 

We have those guys at work, and they are artists.   I watched one of them mix different colors of epoxy putty until he matched the dark grain color just right, smashed that into the hole, and then mixed a slightly lighter tone and eased that into the other epoxy to match the lighter grain, color and direction.  Once it was dried and sanded, You wouldn't know it was a patch job unless it was pointed out, then of course it's obvious, but until then, I had trouble finding it.    But these guys do this full time and for many years. 

 

  • 2 weeks later...
  • Author
On 10/2/2017 at 1:52 PM, Lester Burnham said:

If it's just in those 2 areas in the pictures, I'd paint the bezel black and make a graphic overlay for the control panel. Blacked out bezels always look good. You don't have much space to work with but, if done correctly, you could get some graphics in there if you wanted. What's going on the marquee?

Thanks for the insight.  However, Want to keep the veneer wood look.

I have a custom made arcade sign with some led lights behind.  Check out the sign.  It is going to be awesome!!

 

7B99ABFC-DC1A-4FE6-841C-A4681F0BB419-28256-00001F8153C8D6C1.jpeg

  • Author
  • Popular Post

Thanks to all for your insights.  You let me think some things through.  I decided to trim out the mistakes with some solid stock strips.  There are 2 spots that i did touch up with some markers....not the best, but I tested the marker on a scrap wood with the tung oil I plan on using and it doesn't look too bad.   The new veneer would have been best, but I can live with the 2 marks.

thanks again....since original post I have been hard at work.  Check out progress.....almost there

IMG_4781.JPG

IMG_4782.JPG

IMG_4783.JPG

  • 2 months later...

I'm late to the party here, but the build pics got me curious - is your cabinet done yet? Would love to see the final product.

 

Don't think he has been on but it is a cool project.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.