Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need input on oak countertop

Featured Replies

Hey guys, my wife and I blew our kitchen renovation budget on new appliance so we've opted to use oak butcher block for new counters. Can you guys recommend some finishes to seal and protect the oak that are food safe? I'd like a satin sheen and something a little bit darker than natural oak to bring out the grain a little bit. I've looked into waterlox but it doesn't appear that it will darken the wood any.

Red oak isn't that great for countertops but white oak is. You could use a dye or stain to achieve the color then finish over that.  

The open pores in red oak can trap food particles & juices. 

White oak is also more water resistant than red. 

As for coloring, dye is a good option. Another option that is perhaps more 'natural', and therefore more variable, would be a wash of iron acetate. Simply made by soaking steel wool, old nails, or some other iron-based stock in a mild acid (vinegar works well), iron acetate can darken oak quite a bit. A strong enough solution can turn red oak a deep purple-black. The darkening seems to be a process of oxidation, and stops once a top coat is applied to seal the surface from exposure to the air.

As wdwerker said, the pores of red oak are deep, and can trap a lot of nastiness. If you must use red oak, I would suggest a pour-on epoxy 'bar top' finish to provide a smooth surface. It will look like plastic, but at least you can clean it.

  • Author

Sorry I guess I should clarify. I know it's oak but I'm not 100% sure if it's red or white. I mentioned "food safe" but maybe I should clarify. There will be NO food prep on the counter itself. We have plenty of cutting boards for that. I just want a finish that looks good and more enviro friendly then just slapping some poly on there. For now this is temporary until we can afford some natural stone but if we like the look it may be permanent. 

You said food safe now it doesn't need to be food safe? Kinda confusing.

Sometimes I use this stuff called the "Emmets good Stuff". It's kinda expensive but a little goes a long way. Don't expect too much from any film finish.

Aj

Yeah, food safe is what will really limit you. If you arent cutting on it, then just about every finish is "food safe". It is when you start cutting on a film finish and it flakes off into your food that things become unsafe for consumption. Oddly enough, waterlox original is considered food safe when it completely cures around the 60 day mark. Ive used waterlox on a lot of projects and ive used endurovar on a lot of projects. Just about any well rated finish will perform well for you, but i think it is more important to be proactive in your use and maintenance. For example, just about any finish will fail if exposed to prolonged standing water. This means clean up after you wash the dishes or spill. 

 

Waterlox is an amber colored varnish and definitely darkens the wood, imo. Compared to minwax or another wipe on poly, it is considerably darker. 

 

Are you making this butcher block yourself or is this a lumber liquidators product? The confusion over what species it is leads me to believe it is the latter. If so, please take the time to read about acclimating the piece to your home's climate, properly finishing the top AND bottom, and how to attach it to your cabinets to allow for movement. Ignoring the simple things is what will bring you back posting nightmare stories about cupped counters, cracks, etc.

In Europe, because of tanin and open grain, Oak is not considered food safe anyways. There's bacteria risk. The only woods allowed in direct contact with food is Olive wood or Beech. (preferabilly Beech). The best food safe finish is vegetal oil, like the ones you use in the kitchen. I like rape oil. But with oak, you would probably seal it totally with a food grade epoxy.

If this were a cutting board, I would recommend mineral oil and beeswax. This will make a perfectly safe, water repellant finish on most woods, but does require periodic renewal. White oak would be fine, but the open grain of red oak might collect an excess of wax, which might then dry out and leave crumbly whitish streaks. Have a scraps to play with?

  • Author

Thanks everyone, I've got some scraps from where I cut it to fit so I will try some samples on those. Think I may end up using waterlox.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.