Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Church signage project

Featured Replies

  • Popular Post

Just before Christmas last year our Pastor showed me a quote for new signage at the church. It was for one logo and two 'Worship' signs over the main entrances to the sanctuary. When I saw what was quoted I volunteered to do the signage. They were going to do the signs in metal and the logo would be 48" and vinyl wrapped, also probably metal.

I told Bro Terry that I could do the signs but they would be in 1/2" Baltic Birch. His only request was that no grain show on the logo. I found rattle can enamel that matched close enough and used Hammer Tone finish on the letters so they'd look sort of like metal. To completely fill the grain on the logos I used Bondo on the face and spot putty on the edges. I cut two sets of logos at 60" tall (one for each hallway instead of just one hallway, as was quoted).

Sanding the Bondo back down to the BB face was no fun at all and neither was filling and sanding all the edges of the letters and logos. But it worked just fine. I sprayed primer and all the rattle can paint out in the back yard - there's no way I'm going to spray paint inside the shop. So that meant there were many days of high wind or rain or cold when I couldn't spray. Once all the paint had cured for 4-5 days I clear coated everything with Nitrocellulose sanding sealer and gloss lacquer. I allowed the top coat to orange peel slightly so it wouldn't show finger prints as easily.

To mount everything I used 1/4" aluminum rod cut to about 2" and Liquid Nails for adhesive. I sharpened aluminum mounting rod ends and we held the logo and letters in place and gently tapped to mark where to drill.

Because the logo doesn't have any true horizontal or vertical edges I wondered how I would line them up on the walls (one was sheetrock and one was brick). What I came up with was to cut a piece to fill the negative space and then attach boards on the back to hold the entire piece as a unit for marking, then take the backer boards off to mount each piece of the logo individually.

All in all I'd say everything came out nicely and our Pastor is pleased. Now he wants a world map to fill a 12' wall where we can mark the areas we support for missions. That ought to be fun!

Logo -

729610215_003-ABCnameandlogo.thumb.jpg.a1bcb4f26e11661e394e16894958f5de.jpg

Cutting letters on CNC -

229054627_004-CuttinglettersonCNC.thumb.JPG.25807d6d01b14b9212ab2c39a025a534.JPG

Cutting logo on the CNC -

2027306102_005-CuttinglogoonCNC.thumb.JPG.e611f71a131ea9d57398e0549b83a600.JPG

Edges filled with spot putty -

1702071581_006-Edgesfilledwithspotputty.thumb.JPG.1499d277227fb5091d1d82359a4eda20.JPG

Letters ready for clear coat -

920291779_007-Lettersreadyforclearcoat.thumb.JPG.16400ef72206b53bec2d9c7c0c73fd6b.JPG

Logo with alignment guide -

856769449_008-Logowithalignmentguide.thumb.JPG.e8f6222aa988c01db241f694562f5f63.JPG

Finished signage in one hallway -

468856715_009-Finishedsignage.thumb.JPG.4e039d97281e1f6c7da2c0066282df09.JPG

Enjoy!

David

 

Well done David! Your tithes for 2020 have been covered! 

For my day job I own a sign company. A pretty big one, we are up to 18 employees.

So as a sign making professional I can say that for a DIY sign, you done good David. Really good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.