Dave H Posted April 4, 2021 Author Report Posted April 4, 2021 Here are some pictures of organizing the drawers. Here are some pics of the router compartment Here is the false drawer electrical compartment 2 Quote
wtnhighlander Posted April 5, 2021 Report Posted April 5, 2021 @Dave H, what size drill did you use for the bit holders, and do they bind any in the plywood? Quote
Dave H Posted April 5, 2021 Author Report Posted April 5, 2021 @wtnhighlander 1/2" and 1/4" no not problem I had a plywood box that I used for storage for yrs and yrs until this router table I used 1/2" and 1/4" bits to dill those holes. The drilled plywood in the drawer isn't the drawer bottom it is removable so if it sucks at some point I'll try something else but, I don't see it becoming an issue. 1 Quote
Dave H Posted April 5, 2021 Author Report Posted April 5, 2021 12 hours ago, Coop said: The false drawer is a neat idea! Thanks Coop my thought was I wanted the electrical area isolated because of the router cords, but I also wanted to access this area if I needed to work on the wiring, and I had the extra drawer slide. Quote
Popular Post Dave H Posted April 9, 2021 Author Popular Post Report Posted April 9, 2021 @jussi Here is picture of the DC at fence complete and, it works great. 5 Quote
BillyJack Posted April 13, 2021 Report Posted April 13, 2021 I can tell you right now I haven't seen that laminate in awhile... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.