BillyJack Posted August 30, 2020 Report Posted August 30, 2020 I've seen these on the internet and looking for an alternate source to get these. Can I get prices for these? Similair? Quote
RichardA Posted August 30, 2020 Report Posted August 30, 2020 13 minutes ago, BillyJack said: I've seen these on the internet and looking for an alternate source to get these. Can I get prices for these? Similair? What the hell are 'These" ? Quote
BillyJack Posted August 30, 2020 Author Report Posted August 30, 2020 Darn I forgot the picture...13" Quote
JohnG Posted September 10, 2020 Report Posted September 10, 2020 Not sure what “alternate source” you are looking for. Are you wanting someone here to make them? You said you already found them elsewhere on the internet. Why not just buy them where you found them? I think your original post was a little too vague for anyone to know how to respond. 2 Quote
wtnhighlander Posted September 10, 2020 Report Posted September 10, 2020 Are those signs, box lids, or what? Anyone with a CNC should be able to replicate them with ease. Quote
BillyJack Posted September 13, 2020 Author Report Posted September 13, 2020 That's what I'm looking for is a price. I just want to see how muchh it would cost to CNC and ship.... Quote
BillyJack Posted September 13, 2020 Author Report Posted September 13, 2020 I may be looking to do something different.... Quote
wtnhighlander Posted September 13, 2020 Report Posted September 13, 2020 Try hitting up our resident CNC guru, @difalkner. 1 Quote
difalkner Posted September 13, 2020 Report Posted September 13, 2020 4 hours ago, BillyJack said: I may be looking to do something different.... I typically don't do 2.5D or 3D work because they take so long on the CNC. For those poker chips you're looking at anywhere from 2 to 6 hours, depending on the size and desired level of detail. In that time I can make 5 times as much with flat stock and be finished with the job and no painting. When you posted those on another forum I suggested a router forum where there are any number of guys who do that kind of work all the time. Did you ever join there and post these; I don't recall seeing them if you did. David Quote
BillyJack Posted September 13, 2020 Author Report Posted September 13, 2020 They were to busy to reset the password so I just moved on... Quote
BillyJack Posted September 15, 2020 Author Report Posted September 15, 2020 Sorry my mistake.... Quote
BillyJack Posted September 15, 2020 Author Report Posted September 15, 2020 On 9/13/2020 at 1:35 PM, difalkner said: On 9/13/2020 at 1:35 PM, difalkner said: I typically don't do 2.5D or 3D work because they take so long on the CNC. For those poker chips you're looking at anywhere from 2 to 6 hours, depending on the size and desired level of detail. In that time I can make 5 times as much with flat stock and be finished with the job and no painting. When you posted those on another forum I suggested a router forum where there are any number of guys who do that kind of work all the time. Did you ever join there and post these; I don't recall seeing them if you did. David If you get a chance give me a call.....816-263-0427 Quote
BillyJack Posted September 16, 2020 Author Report Posted September 16, 2020 Difaulkner...Talking about guitars. Here's Denise online ... Youtube.com/ddaileykc Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.