Recommended Posts

Posted

I’ve been working on my dust collection in the shop. I have a grizzly cyclone dust collector. Not like other cyclone manufacturers. Grizzly was absolutely no help at designing a duct system. I suppose it’s not their job to do so. But any way my system consists of a 10” trunk with at this time  4 6” drops with no blast gates to my planner jointer tables saw a spindle sander. Without knowing much about the planning or routing of the ducts that is what I’ve come up with. I felt it was lacking on suction I bought an anemometer and using it to read the cfm of a drop I got this reading 9001 cfm at the end of a 6” duct? Then the flights or fins on the meter flew off ruining the meter. Did I do something wrong? Or was the meter junk to begin with.? Any help would be greatly appreciated 

I understand about cfm and fpm need for volume of air and size of duct to make the system work. Reading on pentz web sight is a great help but I’m kinda lost in it all. IMG_5656.thumb.jpeg.a80918b355df8dbacfbd6c7aca935be6.jpeg

Posted

+1 on the meter being cheap or defective.  A 10" main means you are running a blower with a 7HP motor or larger.  If not your main is probably too large.  Even a 10HP unit will only move about 4 or 5k CFM depending on all the usual suspects.

  • Like 1
Posted

Thanks for all your thought.  I have a Grizzly G0442 cyclone Dust collector 5Hp the inlet size is 10" that's why I went with 10" duct for a trunk I was reading on Bill Pentz web site that you need at least a 8" trunk with 7' drops to get and maintain fast enough airflow and to achieve 1000cfm at the tool to get all of the fine dust. And at least a 5hp cyclone.  I did reach out to the manufacture of the meter, and they will refund my money. I'll buy a better one then. 

thanks again William R

  • Like 1
Posted

FWIW I have a 20 yr old  3HP Oneida Dust Gorilla with an 8" trunk line 4, 5, & 6" drops with as much as 20' of flex hose (Hammer A3/31 12" J/P) and have never had any issues. I also have two long vacuum hoses off it and a plywood manifold. While the original system was designed by Oneida I suspect they would disagree with some of my alterations. I say all of this to let you know while numbers and statistics are very important sometimes you just have to try things and see what works best for you. Do my vacuum hoses suck like a vacuum absolutely not but will they clean the dust off the tools and benches absolutely.

  • Like 1
Posted
3 hours ago, gee-dub said:

Sorry about that, I thought the G0442 was an 8" inlet.  It sounds like you are setup well and just happened to get a self-destructing meter :)

no prob, like I stated I'm kind of lost in this department I'm sure I make it harder than what it need to be, thanks for the reply.

Posted
21 hours ago, JohnG said:

The anemometer in your picture is $1k on the manufacturer’s website and looks very slightly different. So if you didn’t pay $1k for that meter I’d say it’s a cheap counterfeit. 

https://holdpeak-store.com/anemometer-5000d/

Thats the exact same one. I got mine from amazon the seller is Hold peak don't know why thy think it's worth that much.  40.00 from amazon's site. I'll  get a new one and go from there. Thanks.

Posted
On 11/25/2023 at 1:30 PM, William R said:

Thats the exact same one. I got mine from amazon the seller is Hold peak don't know why thy think it's worth that much.  40.00 from amazon's site. I'll  get a new one and go from there. Thanks.

I contacted that company Holdpeak and asked why such a price difference? they stated it was a mistake on their website and fixed the listing 32.00 now. I wonder if anyone purchased that model. at that price?  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 51 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined