Popular Post gee-dub Posted January 28 Popular Post Report Share Posted January 28 I have emptied my cyclone bin at least three times since I have changed bandsaw blades. This includes spoil from all the material used for the Linen Cupboard Doors, some in between stuff, and the work so far on the Pair of Dressers project. My bandsaw collection points are like so . . . In addition to the factory bottom chamber collection point (which I modified a bit restricting the throat and adding a brush) I use what is basically an add-on shroud like so . . . At any rate, after all this time the amount of spoil that escaped collection and made it to the bottom of the lower wheel area is this . . . The Cisco Systems sign is an imprint on some sheet magnet that I use to block the factory lower collection point. I just wanted to share the status of this type of collection for those that may be considering it. 9 Quote Link to comment Share on other sites More sharing options...
Popular Post gee-dub Posted January 31 Author Popular Post Report Share Posted January 31 My small bandsaw's collection is still sub-par. Taking the pics of the larger saw got me thinking about it again. Especially since I am about to use it a lot. I took some scrap ply and re-used the magnets from the previous attempt. The box will capture the lower guides. It was better but I was still getting stuff carried from the lower compartment up to the upper compartment and then spraying out along the spine. I wye'd in the factory lower collection point. This seems better still. Time will tell. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.