Popular Post Mark J Posted January 26, 2025 Author Popular Post Report Posted January 26, 2025 1 hour ago, Woodworking_Hobby said: I ran across this post and wanted to see overall how you liked this tool. I have a grizzly belt sander with cast iron surface I can use for heavy belt sanding but I was looking at finally getting an oscillating sander instead of using the drill press for this operation. I don't have call to use the Rigid very often, and when I do it's in belt mode. However, It hasn't disappointed me so far. I bought it because it was highly recommended by others back when I bought it. Though I haven't used it in spindle mode, I can't see any advantage to a dedicated spindle sander. If you buy one, do yourself a favor, go to Etsy and buy a wrench for that knob. 2 1 Quote
drzaius Posted January 26, 2025 Report Posted January 26, 2025 I've had one for many years and it's had some serious workouts. It may be a cheap machine, but it's a fantastic value. I use mine almost always in belt mode too. 1 Quote
Popular Post Beechwood Chip Posted January 26, 2025 Popular Post Report Posted January 26, 2025 I use mine in both belt and spindle modes. Switching back and forth is easy. A couple gotchas I've learned along the way: It seems that the spindles have a top and a bottom. If I put one on upside down, the sanding drum slips upwards in use. Weird. If you sand (grind) metal, wear heavy gloves or use pliers to hold the piece. And you will burn your fingers after because the metal looks normal but is still hot. I removed the little arm and built a little bracket to hold my vacuum for dust collection. 4 1 Quote
Popular Post Von Posted January 27, 2025 Popular Post Report Posted January 27, 2025 On 1/26/2025 at 4:07 PM, Beechwood Chip said: I removed the little arm and built a little bracket to hold my vacuum for dust collection. I did the same. No photo because Chip's design is better than mine. 3 2 Quote
Popular Post legenddc Posted January 27, 2025 Popular Post Report Posted January 27, 2025 On 1/26/2025 at 9:58 AM, Woodworking_Hobby said: I ran across this post and wanted to see overall how you liked this tool. I have a grizzly belt sander with cast iron surface I can use for heavy belt sanding but I was looking at finally getting an oscillating sander instead of using the drill press for this operation. The comb belt / spindle seems to be a newer option from when I looked at getting one of these a long time ago. I was interested to see if you thought the combo was better or if you thought just getting the stand alone spindle had some advantages if I already have a belt sander. I didn't compare the Ridgid sander to any others when I bought it. I got it refurbished from DirectToolsOutlet. You can get it there right now as factory blemished for only $175. Not sure how that changes the warranty compared to a new one. I've used the spindle portion a decent bit when I made some spurtles and bandsaw reindeer. Some of the benchtop spindle sanders seem to have very small tables. That may or may not matter for what you're looking to do. 2 1 Quote
roughsawn Posted January 27, 2025 Report Posted January 27, 2025 I use my Rigid weekly, both the belt and the spindles. Never had a problem. In fact, I'm very happy with it so far. 1 1 Quote
Popular Post drzaius Posted January 27, 2025 Popular Post Report Posted January 27, 2025 Here's what I use for enhance dust collection. With the shroud it's close to 100%. 8 1 Quote
Von Posted January 27, 2025 Report Posted January 27, 2025 On 1/27/2025 at 2:53 PM, drzaius said: Here's what I use for enhance dust collection. With the shroud it's close to 100%. Cool. Are you still using the original dust collection in back or did you build something into the shroud? Quote
drzaius Posted January 27, 2025 Report Posted January 27, 2025 The vac hose still connects to the back of the sander and sucks all the dust down the slots behind the belt. Quote
Mark J Posted January 27, 2025 Author Report Posted January 27, 2025 2 hours ago, drzaius said: Here's what I use for enhance dust collection. With the shroud it's close to 100%. Good idea, because without such a shroud the dust collection with the built in port alone is about 2% . I keep the vac hose in the original dust collection fitting in the back, but that's only so the vac hose is in reach to clean up when I'm done . 1 Quote
wtnhighlander Posted January 28, 2025 Report Posted January 28, 2025 I use the spindles at each end of the belt too often for a close-fit shroud to work. On tbe flip side, I rarely need to bother with the true spindles. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.