pkinneb Posted February 17, 2025 Report Posted February 17, 2025 Hey all looking for help with pre finish and finishing raking light suggestions. I am finishing a project (ebonizing) and the black, with my already poor eyesight, is extremely difficult for me to see imperfections on. What are you all using for raking light while doing finish prep or finishing? I have a smaller round light but I'm thinking a larger rectangular light would be better, any suggestions? As always thanks for your insight! Quote
Popular Post fcschoenthal Posted February 17, 2025 Popular Post Report Posted February 17, 2025 I like bright lights for all sorts of things. A couple of years ago, on a Black Friday sale, I got two of these from Home Depot. I use them all the time. They're very bright, rechargeable (no batteries to change), have a stand to put them at different angles and it's magnetic too. Another thought would be to get a cheap 2' led shop light. I've got one over my lathe that's 2000 lumens and was less than $20. You'd just have to figure out how to handle or mount it. 4 Quote
wtnhighlander Posted February 18, 2025 Report Posted February 18, 2025 If you have an existing investment in a particular brand of cordless tool, chances are good they offer a LED work light for the same battery platform. 2 Quote
Popular Post Beechwood Chip Posted February 18, 2025 Popular Post Report Posted February 18, 2025 On 2/17/2025 at 8:11 PM, wtnhighlander said: If you have an existing investment in a particular brand of cordless tool, chances are good they offer a LED work light for the same battery platform. I bought an inexpensive knock-off LED work light that runs off my DeWalt batteries. 3 Quote
Popular Post roughsawn Posted February 18, 2025 Popular Post Report Posted February 18, 2025 On 2/17/2025 at 7:11 PM, wtnhighlander said: If you have an existing investment in a particular brand of cordless tool, chances are good they offer a LED work light for the same battery platform. This^^^...I really like my Rigid LED shop light. 3 Quote
Popular Post Coop Posted February 18, 2025 Popular Post Report Posted February 18, 2025 On 2/17/2025 at 7:11 PM, wtnhighlander said: If you have an existing investment in a particular brand of cordless tool, chances are good they offer a LED work light for the same battery platform. +1 I just finished texturing a couple of walls with a smooth finish and this came in extremely handy. 3 1 Quote
Popular Post gee-dub Posted February 18, 2025 Popular Post Report Posted February 18, 2025 This has become my hew favorite. 3 1 Quote
Coop Posted February 18, 2025 Report Posted February 18, 2025 On 2/17/2025 at 8:36 PM, gee-dub said: This has become my hew favorite. How do you recharge the batteries? 1 Quote
gee-dub Posted February 18, 2025 Report Posted February 18, 2025 On 2/17/2025 at 7:19 PM, Coop said: How do you recharge the batteries? USB cable and a power source (included with mine); or a PC, wall wart, etc. A charge seems to last a good long time. 2 Quote
Coop Posted February 18, 2025 Report Posted February 18, 2025 Why sure! I guess I’m just an old fashion AAA and D cell kind of guy! Thanks Just ordered three for me and the family. Quote
Popular Post Von Posted February 18, 2025 Popular Post Report Posted February 18, 2025 I also have a cheap rechargeable (via USB) LED light on a gooseneck clamp I use. I also have a lazy susan I put things on to finish them with the goal being between those to things I can most easily check all sorts of angles on my piece. Don't forget to look for ways to use any natural light you have coming into your shop. 2 1 Quote
pkinneb Posted February 18, 2025 Author Report Posted February 18, 2025 On 2/18/2025 at 7:49 AM, Von said: I also have a cheap rechargeable (via USB) LED light on a gooseneck clamp I use. I also have a lazy susan I put things on to finish them with the goal being between those to things I can most easily check all sorts of angles on my piece. Don't forget to look for ways to use any natural light you have coming into your shop. Thanks Von!! I use lazy susan's as well unfortunately not a ton of natural light as my finish room is in the back of the shop. I haven't typically had issues but this chair continues to challenge me I ordered a couple of the lights suggested and will use one handheld and come up with a clamp like you suggest for the other. 1 Quote
Popular Post roughsawn Posted February 19, 2025 Popular Post Report Posted February 19, 2025 On 2/18/2025 at 7:49 AM, Von said: Don't forget to look for ways to use any natural light you have coming into your shop. Good point! My shop windows face south (16 feet of glass), and I have sunlight/natural light all day. When I finish on my workbench, I walk around, and bend down...letting the natural light shine across my work. Works like a charm! 3 Quote
Popular Post pkinneb Posted February 20, 2025 Author Popular Post Report Posted February 20, 2025 Received my new light today I really like the size of this looking forward to putting it to use. Again thanks for all the help! 3 Quote
fcschoenthal Posted February 20, 2025 Report Posted February 20, 2025 Let us know how it works. You guys are just trying to make me break out the Visa. 2 Quote
pkinneb Posted February 21, 2025 Author Report Posted February 21, 2025 So no experience with any other light for this purpose but this one certainly met my needs for this project. Its light, flexible, and the light brightness is adjustable, oh and pretty cheap at $20 ish out the door. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.