Beechwood Chip Posted January 1 Report Posted January 1 I currently use my dust collector for things that have a 4" dust port, and regular shop vac for things that have a 2.5" dust port, and a Stanley 4HP for things with a 1" dust port. I'm considering getting a dust extractor to use with my ROS, circular saw, and various routers. I don't own any Festool and I don't see myself buying any in the future. What I'm looking for is: HEPA filtration, powerful suction, auto on-off with a NEMA 5-15 (15A 120V) plug and outlet, and a long, flexible hose w/ power outlet and boom arm. A self cleaning filter would be nice. Bags that are easy to change. I could manage a 20A circuit if I had to. It will mostly live under my bench but wheels would be good. Consumables (bags and filters) that won't break the bank. I'm looking at the Festool line, but they are pricey and I'm concerned about compatibility with generic US plugs. I can afford Festool C26 if that's the best choice for my use case. For a purchase this big, I'm trying to avoid buyer's remorse where I assumed that it would have some feature that's not there. That's why I'm trying to list all of my assumptions. Any other features or gotchas I should look out for? Any recommendations? Thanks! 2 Quote
Von Posted January 1 Report Posted January 1 Chip - I'm not far behind you as I see a similar purchase for myself sometime and mainly chiming in to +1. I have a RIGID shop vac I've upgraded with HEPA filters and an IVAC switch to give me some of the features you are after, but I have the vague impression it doesn't have the same suction as the high end units. A local hardware store sells the FEIN vacs (e.g.) which are certainly priced at the bottom of the Festool range. If they ever go on sale, I may impulse buy one. I welcome anyone's experience with those. Really, I just wish I knew more about the pros and cons. What I really wish is that there was somewhere I could go to try out all the different options. 1 Quote
Popular Post Mark J Posted January 1 Popular Post Report Posted January 1 Full disclosure: I do little if any flatwork. In fact my track saw and ROS's haven't been out of their cases since before the pandemic. I bought a Festool CT-26 many years ago, and have no regrets. Note at that time there was no FEIN, or other choices in the "extractor" category. I also have the big Rigid (16? 18? gal). I think it is the most powerfull shop vacuum I've ever used. It really pulls a lot of negative pressure (a solid EF-4 ). Great for bulk clean up, but probably not good for a ROS. The CT-26 also pulls a strong vacuum, but it has a knob by which you dial up or down the intensity--a very useful feature. The hose is not floppy, but much more flexible than a shop vac. It rolls quite easily, so much easier to move around the shop. It has a handle so easier to carry. I use the CT for dust collection at the Rigid oscillating sander and the BS. I also use it for general clean up around all the stationery power tools. Particularly the drill press where I dial down the suction. (I store a few jigs on the bottom platform using a organizational method I call jumble, so dialed down I can suck up some chips without sucking up jig pieces). I have both the large and small diameter hoses. I think one came with the foor wand. By the way this does a better job and is much easier to use on the floor than a shop vac. I do occasionally take the CT to other locations when needed. What's not to like? Well neither the large or small diameter hoses will mate with standard US vac fittings. So you have to come up with some adapters. I wish I had some mount for the brush and crevice tools, but frankly I'm not motivated enough to buy one. 3 Quote
Popular Post pkinneb Posted January 1 Popular Post Report Posted January 1 I have a fair amount of Festool most are awesome tools and many are probably overpriced. Having said that I have had a CT26 for nearly 15 years and its the one of the few Festool items I actually think are worth the price. It works flawlessly (see above post from Mark J as its on point) and with the Oneida Systainer Cyclone Separator it will go a long time between empties. 3 Quote
Popular Post legenddc Posted January 1 Popular Post Report Posted January 1 I recently bought a used Festool CT-26. It's an older model without the newer hose. The CT-26 and Midi seem very similar. I like it so much better than my old Craftsman 12 or 16 gallon vacuum. The Festool CT-26 is a lot quieter than my old shop vac. I don't need to run it at full suction when I use it on my 5" Dewalt ROS and it pulls out the dust a lot better than the old shop vac. Seems to work well with the Kreg track saw but I think a larger hose and remembering to turn it up to full suction would improve it. The auto-on plug is great. I see why people like the bluetooth adapter to turn it on without turning the knob on the extractor. The Festool also doesn't have a cannon of air shooting out the back kicking up dust. Beware, the price of accessories for the Festool are expensive. The handle kit is close to the cost of a new shop vac. Rockler and Harbor Freight both have dust extractors now too for a lot cheaper. 3 Quote
Popular Post Beechwood Chip Posted January 1 Author Popular Post Report Posted January 1 On 1/1/2026 at 1:10 PM, legenddc said: Rockler and Harbor Freight both have dust extractors now too for a lot cheaper. I'm seriously looking at the Harbor Freight unit. Much lower in price, and the spec list seems to meet my wish list. Inexpensive bags, washable filters. Downsides are the 90 day warranty and the cheap plastic hose. Specs aren't everything, but at that price I can afford to take a risk on it. Also, I can buy it, try it out, and return it if it's disappointing. Haven't made a final decision, but that's the current front runner. 4 Quote
gee-dub Posted January 1 Report Posted January 1 Just so we stay focused; a dust extractor is a vacuum cleaner and a dust collector is something else. I have two vacs in the shop that I use for hand held power tools and they are indeed the answer for that as well as arguably the drill press, floor standing sanders, and the miter saw. The low volume, high velocity works better on these tools than trying to step down a dust collector. Both collectors have their place but they do not really replace each other. 2 Quote
Popular Post Beechwood Chip Posted January 1 Author Popular Post Report Posted January 1 On 1/1/2026 at 3:58 PM, gee-dub said: a dust extractor is a vacuum cleaner and a dust collector is something else Air filter: very high CFM, very low static pressure. Dust Collector: high CFM, low static pressure. Shop vac: low CFM, high static pressure. Dust Extractor: low CFM, very high static pressure. At least, that's how I understand it. I've got the first three, now I'm curious to see if the Dust Extractor is worth the price tag. 4 Quote
Popular Post gee-dub Posted January 1 Popular Post Report Posted January 1 Just to clarify, I am not dogging extractors at all. My brother had an old Fein for many years. The new Feins are not so good according to him. He returned it and got a Festool. These highly focused little buggers can really rock. I get by with a couple of highly modified Ridgids with Dust Deputy cyclones in the path. They do well but the extractors seem to do really well. 5 Quote
Popular Post Coop Posted January 2 Popular Post Report Posted January 2 Chip, years ago, I purchased a 2 hp HF dust collector. It came on a metal rolling cart and had the cloth filter. I would roll it from machine to machine as needed. After years of trying to keep the filter bag clean and still seeing dust billowing from it, I purchased a a Wynn pleated filter, made my own cart and added a homemade separator. This made a world of difference. Since then, I moved the unit, still on the cart to a side room in my shop and hard piped it via 4” plastic sewer pipe to my jointer, bs, drum sander and ts with gates. Very little money and time well spent. In 2018 I purchased the Festool CT 26E, a Domino and a ETF 150/5 ros and only use the CT 26 on these two items. I also have an old Craftsman 10 gal. wet and dry vac on a mobile cart, also with a separator for shop cleanup and for use on my router table. Having said all of this, if the HF unit ever goes out, I will definitely buy a new one. 3 Quote
Beechwood Chip Posted January 2 Author Report Posted January 2 On 1/1/2026 at 8:03 PM, Coop said: Chip, years ago, I purchased a 2 hp HF dust collector. It came on a metal rolling cart and had the cloth filter. I would roll it from machine to machine as needed. After years of trying to keep the filter bag clean and still seeing dust billowing from it, I purchased a a Wynn pleated filter, made my own cart and added a homemade separator. This made a world of difference. Since then, I moved the unit, still on the cart to a side room in my shop and hard piped it via 4” plastic sewer pipe to my jointer, bs, drum sander and ts with gates. Very little money and time well spent. I did almost exactly the same thing, except it was a used Jet 2HP DC and I added a home made Thein separator with the Wynn filter. But it still leaked dust and rather than spend time tracking down and patching holes I ended up buying a Harvey Gyro G700. I'm really happy with my DC setup and my two home made air filters. I have a few shop vacs for the things that have 2.5" dust ports. I figure adding a dust extractor will be the final piece of the puzzle. 2 Quote
legenddc Posted January 2 Report Posted January 2 Harbor Freight now has an actual dust extractor now. In addition to the old dust collector (now $299), they have a new one with a pleated filter ($449). 2 Quote
Coop Posted January 2 Report Posted January 2 On 1/1/2026 at 7:55 PM, legenddc said: Harbor Freight now has an actual dust extractor now. In addition to the old dust collector (now $299), they have a new one with a pleated filter ($449). Pretty cool but the separator makes a world of difference. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.