Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Guest Bedroom Dresser

Featured Replies

  • Author
  • Popular Post

Thanks.  Pretty sure I picked that up from someone on here . . . . I'm in one of those phases where there is a lot going on but not much to show for it. I hand shape one of the pull blanks.
GuestDresser(235).thumb.jpg.8c77fb9d2d6acd7711484f4a0cc045ef.jpg
Then use it to mark out the balance and hand shape them at the edge sander as well.
GuestDresser(236).thumb.jpg.d87cc4f9d390a244b68eff2002ec738d.jpg

  • Replies 146
  • Views 8.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • gee-dub
    gee-dub

    Well, this one took a couple of months. In my defense, I enjoy the process more than the completion. Also we had several birthday soirees in the back yard (including mine) and Father's Day, plus visit

  • gee-dub
    gee-dub

    Yikes!  They have certainly gotten proud of that thing since I bought it.  Adjusting for the costs of things at this point in time I would still say it is worth it.  My accuracy and consistency go way

  • gee-dub
    gee-dub

    Well . . . Mr. Twinkie Pinhead (that would be me) got ahead of himself and cut the leg tapers before he cut the joinery. Let me re-state that in a better way; always cut your joinery before you cut yo

Posted Images

  • Author
  • Popular Post

Inching along . . . I use the ROS-Table-Jig-Thingy yet again. This POS is made from an old IKEA TV stand. I keep swearing I am going to build a version 2 but it just never seems to happen.
GuestDresser(237).thumb.jpg.d24653c9913357e36dfce6b8f67311c0.jpg
At any rate it allows you to random orbit sand small parts without launching them across the shop or sanding off your fingernails.
GuestDresser(238).thumb.jpg.24294318c809ab9d7298427606f60057.jpg
Here's a first run of what I think of as shellac flooding. For light colored figured woods this lets the shellc dive deep into the softer material and emphasize the figure.
GuestDresser(239).thumb.jpg.ea1d22eff3b30c5f987b4a3744670880.jpg
These will be top coated with a lacquer later on in the process for protective reasons but, I really like the look of the shellac on the tiger maple. Speaking of liking the look . . . as mentioned I didn't document the side tables very well because I thought they were a "one-and-done" sort of build. Life says "Nay-Nay". I do a test board to figure out what mad scientist formula I used with the side tables.
GuestDresser(240).thumb.jpg.8dccd02a11cb14dfdd5d1b94487950d9.jpg
LOML says "they all look the same" until I hold the test board up against the side tables. Then she says "Ah-ha" . . . ;-)

GuestDresser(241).thumb.jpg.70a8b76c428e1862a99848ddd4d2673b.jpg

I have received her blessing on the pulls so away we go . . . the iPhone auto-adjust coloration makes this look a bit odd but, you get the drift.

  • Author
  • Popular Post

Still limping along. I had way too many yard chores today but it was cooler than recent days so I wanted to take advantage. At any rate, I got some drawer fronts mounted. I hope to get the last three before company comes for dinner tonight.
GuestDresser(242).thumb.JPG.0e4eceb26037dae88efa06e6d47536f7.JPG
If I get that done I can fit pulls tomorrow and surface prep the drawers. Then I can glue up the top and see some light at the end of the tunnel.

Funny how some of these gimmicky things can actually be useful.

GuestDresser(243).thumb.jpg.47b7c3a3b43c76431a122c19bb7fd8ff.jpg

Yay!

GuestDresser(244).thumb.jpg.a39c2f679d7e04503a57aa658f343cd3.jpg

  • Author
  • Popular Post

Closing in.
GuestDresser(245).thumb.jpg.48505ea8ff17da96771b0e6a28e958ba.jpg
We get the youngest grandson today so I am hoping to mount the last four pulls before he gets here.

  • Author
  • Popular Post
Finally. Man that seemed to take forever . . .
GuestDresser(246).thumb.jpg.7fdffd994cfe3e74dbd320f7135673f6.jpg
It's a good thing I enjoy the journey more than the finish line.
Again the iPhone tends to distort things but I had left the Canon in the house and was too lazy to go get it. Time to start material selection for the top.
 
  • Author
  • Popular Post

It is not uncommon for me to do field modifications to my designs now that I am only building for myself. LOML doesn't especially love the large overhang of the tops like I do so we often split the difference.
GuestDresser(247).thumb.jpg.b0e0c2c440f0ddc75a270eed8118d9c9.jpg
I had to break out the ladder but found some usable material in one of the overhead racks.
GuestDresser(248).thumb.jpg.67cd666815bf6261e766566258f62827.jpg
As with a lot of S2S lumber there is some deviation from flat.
GuestDresser(249).thumb.jpg.5cbe5034929b4bad422fdcd9f6efd4c1.jpg
The boards will be longer than my jointer tables. This allows the arc to affect the feed path; if ya git mah drift.
GuestDresser(250).thumb.jpg.884546e7439f688148a968faa6d0d8c6.jpg
The end of the board will drop as it leaves the support of the table and you will never get a flat, true, surface.
GuestDresser(251).thumb.jpg.c03041c5e67455435845eb6eebb39f82.jpg
Easy enough to add some support in plane with the jointer outfeed table.
GuestDresser(252).thumb.jpg.7d1a3e550b5b8c7acda38ff32e69b4ba.jpg
I have the jointer set up to take about 1/16" per pass. The deviation is a fat 1/8". I will start in the middle where the cutter head does not touch the material.
GuestDresser(253).thumb.jpg.d4578bd8a600f250bc57a2b82b7dff5b.jpg
I then reverse the board and do the same. I end up with both ends partially trimmed (the areas to the left and right of the chalk marks) but I still have an arc in the center.
GuestDresser(254).thumb.jpg.4cbe476d4489c262a899102600bdb22f.jpg
I can now flip the board and make a full run (with the extended support) and I end up with a true, flat face. I then use this face as a reference on the planer and get a set of parallel face blanks.
GuestDresser(255).thumb.jpg.b14ced1aff71a808d2f7ffaf1914b5a5.jpg
As I often preach, I will now dress the edges and glue up the panel that will make the top sooner rather than later.

I like the support stand. It looks like it is relatively easy to dial in. What brand and where did you get it?

Thanks

Glenn, I love how you are a vast resource of useful information. I realize that a board could dip as it went way over the outfeed, but never thought about putting a support inline like that. I've done the cut from the middle in both directions, but usually just push down as hard as I can on the final passes.

You definitely live up to your tag line.

BTW..the dresser is looking great.

  • Author

@curlyoak - It's a Jaw Stand XP marketed under the Rockwell label but I have seen it as a Triton and a Bora as well.  I have one of them without the fine tuning crank adjustment but just don't use it anymore.  If anyone is in the neighborhood, drop on by and you can have it.  It works great but the fine tuning feature makes the XP much better as a machine support.

@fcschoenthal - Thanks for the kind words.  I don't think I'm all that but I have banged my knuckles enough to warn others where to be careful not to bang theirs. :D

On 7/14/2026 at 5:40 PM, gee-dub said:

It's a Jaw Stand

Every where I check, out of stock. I like the tool.

On 7/14/2026 at 8:22 PM, curlyoak said:

Every where I check, out of stock. I like the tool.

I was lucky to find one on Craigslist and second their utility.

  • Author
On 7/14/2026 at 5:22 PM, curlyoak said:

Every where I check, out of stock. I like the tool.

Wow, I see what you mean.  I wonder what the deal is(?).

I can get one without the crank. But I might have found one on craigslist.

Another outstanding piece of furniture. Not only do you offer exceptional work,  but your presentation is all magazine quality. And answer every question with depth. 

After this is complete I'm confident as soon as you are able, another project will appear that will keep us focused.

Thank you!

  • Author

I started with one without the crank.  If we weren't about as far apart as you can get in this country I would drive it over. I can only say this . . . hold out for the crank! The micro-adjustability is a night and day difference. :)

On 7/15/2026 at 12:34 PM, gee-dub said:

I started with one without the crank.  If we weren't about as far apart as you can get in this country I would drive it over. I can only say this . . . hold out for the crank! The micro-adjustability is a night and day difference. :)

+1. Mine doesn't have the crank and so while I can't speak to it, I can say height-adjusting without it is a pain.

On 7/15/2026 at 12:34 PM, gee-dub said:

If we weren't about as far apart as you can get in this country I would drive it over. 

And if I lived closer I would have made several trips to your shop...

I have a single roller no crank. not a go to choice.

  • Author
  • Popular Post

I do have some fiber-resin wedges with magnets epoxied to them that stick to my roller stands.  I use these to level things when the world is not perfect.

RollerStandWedge-1.thumb.JPG.4e5a1c5f76bc722dcdcfdbdda46db436.JPG

RollerStandWedge-2.thumb.JPG.5c508d42411a1412deaa7cba13cced76.JPG

:D:D:D

  • Author
  • Popular Post

I got about 3-1/2 hours in this morning but have to knock off and make store run. I am wayyyy overdue on making chicken-ka-bobs and the natives are getting restless. I rip the boards for the top to final width before glue up. I do leave them a smidge fat so I can true up the edges of the glued up top.
GuestDresser(256).thumb.jpg.ddcfbc872bbe82da17a087aa203ae0d3.jpg
The handy-dandy version 1 of the can shaker. I will use some rattle can lacquer on the pulls to make them a bit more durable. The guest bedroom is also the grandkids bedroom when they stay over and kids can be a little . . . dare I say . . . Tasmanian Devil?
GuestDresser(257).thumb.jpg.eb6ce22be7ca92a052a7b4be6d7adec8.jpg
I am happy with these.
GuestDresser(258).thumb.jpg.f35242cd72603d0fca43385c3dceb215.jpg
The top glue up worked well. I align the seams on the show side as I go about the clamping during the glue up but this sometimes leaves glue lines or small irregularities on the bottom (of the top). I want things flat because irregularities on the bottom (of the top) may make the top seat poorly. Better a little more effort now than a lot later when I think I am almost done . . . that can be so disheartening. A cabinet scraper takes care of the leveling duties.
GuestDresser(259).thumb.jpg.9ccdd7b9d36d2e2d91722fd6edc68f64.jpg
The red oak support board under the right hand side of the piece being crosscut at the sled has an interesting tale that I believe I have told before. It was a finish test-board for one of the first things I ever made for LOML. It got repurposed as a support board and has been with me for . . . (had to go look) . . . 21 years!!! This is a good example of how the router table and tablesaw being co-located provides a greater work surface for both machines.
GuestDresser(260).thumb.jpg.9025327e0799c9e2ff51fbaa6a7c9361.jpg
I want a chamfer profile to make the edge of the top look thinner to better match the end tables. I clamp a backer board to avoid blow out.
GuestDresser(261).thumb.jpg.e61364691abd5583fa09216a97e51588.jpg
It does this for me.
GuestDresser(262).thumb.jpg.76002b1c84d82188b11f4c8bbe744734.jpg
Another example of the shared work surface.
GuestDresser(263).thumb.jpg.37f72101ce618389fc7b0711c8e4d7db.jpg
These work supports come in many flavors. I also have glued up dimensional lumber that has been milled to consistent dimensions for when I need a bit more height. At any rate these Lee Valley hockey puck doo-dads were about a buck each back in the day. I don't know what they get for them now. Super useful.
GuestDresser(264).thumb.jpg.6de2289623d2d6fe3b651806c3696815.jpg

GuestDresser(265).thumb.jpg.36067c4964001caa9e63de6e5dc7ced5.jpg
My back is barking at me from the cabinet scraper and card scraper work earlier this morning. I am going for the ROS to prep the top. I use the Charles Neil method; I sand across the grain at 150, then with the grain at 150, with the grain at 180, and with the grain at 220.
GuestDresser(266).thumb.jpg.4bd9d711b5250d3a89b78fda6ccabcc2.jpg
And I end up here. I will want to tint some of that sappy material before I apply the 1:1:1 blend.
GuestDresser(267).thumb.jpg.29ec24f86a6f6ed13213a0a598432e2d.jpg
I may or may not leave that band of sapwood on the right front edge as a design element. I need to percolate on that a bit.

  • Popular Post

 

 

On 7/16/2026 at 12:06 PM, gee-dub said:

...The handy-dandy version 1 of the can shaker. I will use some rattle can lacquer on the pulls to make them a bit more durable. The guest bedroom is also the grandkids bedroom when they stay over and kids can be a little . . . dare I say . . . Tasmanian Devil?
GuestDresser(257).thumb.jpg.eb6ce22be7ca92a052a7b4be6d7adec8.jpg
 

Ok I have gleaned a lot of tips from you over the years but the can shaker is next level :D

On 7/16/2026 at 7:01 PM, pkinneb said:

Ok I have gleaned a lot of tips from you over the years but the can shaker is next level :D

+1. Plus I wish I had been smarter with the heights of all my various tools/tables...

  • Author
  • Popular Post

I don't often use z-clips but have several and am trying to use them up.
GuestDresser(268).thumb.jpg.01447521e4addf379f1fee2b732a4d6b.jpg
The frame sections I want to put the mortises in do not provide a lot of "riding" area for the router. A biscuit joiner is a great tool for making these slots but, I do not have one.
GuestDresser(269).thumb.jpg.65c28bd504dbad8756469fe3bcab9457.jpg
I opt for a small Lee Valley bit that when compared to a 2" spindle mounted slot cutter bit is like comparing a 22 revolver to a 45 caliber Glock at the range. The feel is super lightweight and very controllable.
GuestDresser(270).thumb.jpg.d2c86003c2172fcf43c047c4044d0110.jpg
I check for the shallowest space I have to clamp the support block.
GuestDresser(271).thumb.jpg.889a9cad7024dbc39125a427ec890272.jpg
I cut a blank from a piece of butcher block leftover from when I made an outdoor bar for a friend. He supplied the stock.
GuestDresser(272).thumb.jpg.a4751f51aef1fa54f9e242cb841552a9.jpg
Length is good.
GuestDresser(273).thumb.jpg.5a5f79bb7ad9d18795455e67ab353b30.jpg
Joint edge to face.
GuestDresser(274).thumb.jpg.bb7ebf73169c6e9f1f6f62d69003e3bf.jpg
Rip off a support block.
GuestDresser(275).thumb.jpg.3e6402994a3428938699b8c6fc6a2245.jpg
I lost a couple of pics but you guys know how these things work.
GuestDresser(276).thumb.jpg.7d98f6a478bfd6868c68e78947fdc674.jpg
I will have a total of eight of these z-clips plus an anchor point amidships with room to move.

  • Author
  • Popular Post

Here are the two curly maple drawer fronts ready for the first phase of finish.
GuestDresser(278).thumb.jpg.1fede69a9cd2421d4cec6d7788f376d8.jpg
I do the "shellac flooding" to the one on the left for comparison. There will still be additional top coat work on these that will differ from the walnut balance of the piece.
GuestDresser(279).thumb.jpg.60aecdf36a6a13f45b3be3beb6b34af3.jpg
Here is my rouge's gallery of finish components.
GuestDresser(280).thumb.jpg.60276e490642eb79a84242df3594b39c.jpg
It is nice and hot so I will skip the Japan Drier although it is useful in winter months. I use those throw-away scoops you get with protein powder or coco as chemical dippers. I have a large freezer bag full of them so just use them and toss them into my trusty Bucket-o-water (I failed to take a pic of that) that I have on hand whenever I am using high-VOC materials
GuestDresser(281).thumb.jpg.445ebfc748a581742c41f81b782331f2.jpg
I mix everything in a throw away container and then strain it into an old Costco Peach jar.
GuestDresser(282).thumb.jpg.85d9c54429f665be5195d0711b054d04.jpg
And here is where I end up.
GuestDresser(283).thumb.jpg.771e53972a21300b8fd1adc381f554c2.jpg
I don't use a lot of colorants but walnut fades after 10 years or so. I have learned to simulate the color of freshly oiled walnut so that when the material naturally lightens the colorants keep that fresh oiled look.

  • Author
  • Popular Post

I'll just be applying finish for the next couple of days so no real action here.

GuestDresser(284).thumb.JPG.281d1ed7155cf8c53dee7244c52ca335.JPG

First coat for the drawer fronts.  

  • Author
On 7/17/2026 at 2:04 PM, roughsawn said:

Which Trans Tint are you using, gman? I'm fond of Coffee Brown for all my oak work.

Yeah, the color is definitely species specific. I tried mission brown on ash one time and it turned it greenish. I am using a “medium brown” for the walnut. The tint choice is also dependent on the material color since walnut runs from blonde, through gray, into almost blue, and into dark brown. I wish there was a pat answer but there is not :wacko:.  I can only reiterate; test boards, test boards, test boards.

***UPDATE***  Just realized the Transtint I just used was "Brown Mahogany", not "Medium Brown".  So many subtle differences in colors I was trying to match the existing nite stands.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.