Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Guest Bedroom Dresser

Featured Replies

  • Replies 146
  • Views 8.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • gee-dub
    gee-dub

    Well, this one took a couple of months. In my defense, I enjoy the process more than the completion. Also we had several birthday soirees in the back yard (including mine) and Father's Day, plus visit

  • gee-dub
    gee-dub

    Yikes!  They have certainly gotten proud of that thing since I bought it.  Adjusting for the costs of things at this point in time I would still say it is worth it.  My accuracy and consistency go way

  • gee-dub
    gee-dub

    Well . . . Mr. Twinkie Pinhead (that would be me) got ahead of himself and cut the leg tapers before he cut the joinery. Let me re-state that in a better way; always cut your joinery before you cut yo

Posted Images

  • Author
  • Popular Post

It's funny how some projects seem to zoom along and others are like dragging a sack of cement :D.  Birthdays, Father's Day, helping the neighbor with his boat . . . life in general can sometimes pile up and break your rhythm. I hope to finish breaking down drawer box parts tomorrow and start getting things glued up.

I usually wait till close to the end of a project before I do the top.  I like to take larger panels out of the clamps, prep them, and lay on the finish pretty much right away.  If the carcass, drawers, and top attachment method are all in place before I make the top, things finish up pretty quickly.

I still owe LOML a rolling island for the kitchen.  I'll start working on the drawings for that while the finish on this piece cures.  I'm always saying my to-do list will last longer than I will :D:D:D

  • Popular Post
On 6/21/2026 at 9:55 PM, gee-dub said:

I'm always saying my to-do list will last longer than I will

Amen to that. SWMBO is always adding to my list. I always respond to her with the same phrase I used as a Program Manager, "Sure, I can do that. What other project do you want it to take the place of"? That usually slows her roll for a while.

  • Author
  • Popular Post
On 6/22/2026 at 5:00 AM, fcschoenthal said:

"Sure, I can do that. What other project do you want it to take the place of"?

A man after my own heart.  I used the same line while managing my "resource to request" ratios at work.  Something like "You go get Professor Smith to OK me not working on his project and I will start working on yours". :rolleyes:

  • Author
  • Popular Post

One of the things I am so glad I did (courtesy of some other clever guy's idea) is the swinging sheet goods rack. It sets flat against the wall over by the double doors most of the time.
GuestDresser(147).thumb.jpg.439f2f06ef70bb696a58488a97c200aa.jpg
I added this pull handle on each side to allow me to more easily swing it in and out.  It is made out of an old closet rod from a rental.
GuestDresser(148).thumb.jpg.e7cd9af92ed16336e96ae9d067545351.jpg
Once out I can easily pull out sheet goods into the open "assembly area" that I try to keep clear except during glue-ups.
GuestDresser(149).thumb.jpg.859bbc0d83733a61accb8829d2a1e1fc.jpg
The good ole foam board on the floor with the GCS does the trick for breakdown.
GuestDresser(150).thumb.jpg.22ccdc3cf77e8226f10ca74c1884fe9a.jpg
I get my larger blanks out of the sheet.
GuestDresser(151).thumb.jpg.1508e4465dd7e4471e26a7d73ecf5c39.jpg
I guess I am just justifying myself here . . . This dresser is pretty much a utility piece for the guest room (no offense to our guests) so it just replaces these Wal-Mart dressers that I have had since I used to build out dot.com cages for a living back in the late 1990s to early 2000s.
GuestDresser(153).thumb.jpg.3b61e5f7c1aa2fdd008e2cdd4afd5866.jpg
Therefor I am making pocket hole drawer boxes (no sin there) and the 720 or a like device can really make your life easier.
GuestDresser(152).thumb.jpg.1dd2d8e54ee43c56919d26ee7fea8fd7.jpg
28 dados later . . .
GuestDresser(154).thumb.jpg.bcaf0c1d5f2f9400168c7eca4fa311ba.jpg
Now I need to cut me up some drawer bottoms and get to gluing.

  • Author
  • Popular Post
My super-scientific method for tracking parts. I do mock things up in SketchUp but, once a project starts I pretty much measure off of the piece as opposed to off of paper. Ergo; the white board.
GuestDresser(155).thumb.jpg.0123bc36a2265407d496416bef621ef8.jpg
Here is an example of being able to handle 60" x 60" baltic birch at the tablesaw.
GuestDresser(156).thumb.jpg.6dc631f661c133ee856e60ffecd8fc6f.jpg
I decided to finally get rid of this piece of BB/BB grade that I got from somewhere (don't recall). BB/BB allows for patches and pin knots like so.
GuestDresser(157).thumb.jpg.07477032121f70345299953e7d1873d3.jpg
My standard is B/BB which has one full veneer side without plugs, patches, pin holes, or mineral streaks. The price difference is minimal in the quantities that I use. I shellac the interiors of all drawers. The benefit here is no smell, quick dry, and an easy clean surface with a damp rag if required. Man there are a lot of drawer parts in a 7-drawer chest.
GuestDresser(158).thumb.jpg.34c01dd76fd6517822b7b990de56ce5a.jpg
Did I mention that there are a lot of parts in a 7-drawer chest?
GuestDresser(159).thumb.jpg.e28456a263a021f4f2113cf459a4a2af.jpg
Still more . . . Not a real good grain match on these but I was able to burn up a bunch of off cuts from previous projects.
GuestDresser(160).thumb.jpg.6d0e3d4f12c6c09dbc64a1511e7ba6c9.jpg
I ran out of finishing surface and still have these to go. That's OK, they are dry to touch in about 20 minutes so I will just cycle them off to a vertical (or leaning) position somewhere.
GuestDresser(161).thumb.jpg.4c3e5c01be0aa3a1b5e0cecd81c106b0.jpg
On and on . . .
  • Popular Post
On 6/26/2026 at 6:16 PM, gee-dub said:

measure off of the piece as opposed to off of paper.

I can't build any other way. I know that there are others that only build off the paper. Not my cup of tea...

On 6/26/2026 at 3:16 PM, gee-dub said:

once a project starts I pretty much measure off of the piece

I also use relative dimensioning once the project is off the ground.

@gee-dub, good job breaking the 5x5 down on your ts. I’ve never understood those dimensions after buying my first piece. Hard to transport as well as handle. I opt for 4x8 if available. 

  • Author
On 6/27/2026 at 7:28 PM, Coop said:

@gee-dub, good job breaking the 5x5 down on your ts. I’ve never understood those dimensions after buying my first piece. Hard to transport as well as handle. I opt for 4x8 if available. 

I'll probably end up going 4x8 from now on.  My local yard doesn't carry the 5x5 and it is a 3-1/2 hour round trip to my favorite yard.  I used to hit that one when I would go to visit my parents every couple of weeks but, they are both gone now so no more regular trips down that way.

  • Popular Post
On 6/27/2026 at 7:28 PM, Coop said:

I’ve never understood those dimensions

Steve Duncan (wdwerker) told me that it is a hold over from the aviation industry.  Baltic Birch was used to cover the interior walls on aircraft and the 5ft dimension was the on center dimension between the frames.

  • Author
  • Popular Post
On 6/28/2026 at 9:29 AM, Chet said:

Steve Duncan (wdwerker) told me that it is a hold over from the aviation industry.  Baltic Birch was used to cover the interior walls on aircraft and the 5ft dimension was the on center dimension between the frames.

That is so cool to know that now.

Drawer boxes and more drawer boxes . . .
GuestDresser(162).thumb.jpg.08e2ec03490e88b3224e1d770657e404.jpg
I know I sometimes go overkill on clamps but . . .
GuestDresser(163).thumb.jpg.0471af863f654bd37909baa61a655d10.jpg
. . . I figure I've got them so, use them.
GuestDresser(164).thumb.jpg.a9d7a614b6476d70b403a4820f6494b5.jpg
Boxes everywhere.
GuestDresser(165).thumb.jpg.d0f25429ff0e3e249e18541bd38ae310.jpg
I am starting to mount slides and surface prep the outer shell of the boxes for finish.
 
  • Author
  • Popular Post

I modified the port on my edge sander from 4" to 6".
GuestDresser(166).thumb.jpg.40aef52f4a334d910b5c2fd9419c6ed2.jpg
When I need to work on the unit it easily pivots out from the stored location via the mobile base.
GuestDresser(167).thumb.jpg.d4623cbb3ea782c4624c8dca9342b475.jpg
The 1/4" BB Ply hood sticks on to the cast iron spindle table via magnets.
GuestDresser(168).thumb.jpg.1d58c3a25a7dd7d343182e0a7d42910d.jpg

GuestDresser(169).thumb.jpg.a71ffa5feb1d1e5d9827e1b1329c20d4.jpg
When I need to move the unit away from the operating station I just let the hood hang from the hose.
GuestDresser(170).thumb.jpg.e49b69437b9531ba53b56993075372e7.jpg
Pull the belt guard.
GuestDresser(171).thumb.jpg.8d480a65c18d925ab8bf5d50ad69d9bc.jpg
Pull the current belt.
GuestDresser(172).thumb.jpg.710e50648c7672ecf368ef8017cbd845.jpg
Select the new belt grit and put the old belt (if still usable) back into the stacks. The belts for the horizontal and vertical belt sanders hang from PVC end caps screwed to the side of the drum sander cabinet. A short section of PVC is glued in and a scrap plywood disc is stuck in the end for structural strength. Those belts can get heavy.
GuestDresser(173).thumb.jpg.e52f4ac3e36f3a1ef950fdf816211f25.jpg
Anyway, new belt on, adjust for tracking if required. This is usually not required but if it is you want to do it BEFORE you put the belt guard back on.
GuestDresser(174).thumb.jpg.97660515a869301e350b16ddf080b0ba.jpg
Stick the hood back in place and you're off to the races.
GuestDresser(175).thumb.jpg.8076057af440e0418da520b5201a5a36.jpg
Since I was trying to use up scrap pieces some grain runs the other way. This is easily solved on the vertical belt.
GuestDresser(176).thumb.jpg.f02333f8c8da57abf8925a6e563d2d43.jpg
The sanders, like my drill press, store against the wall and are normally usable there. If I require more clearance I just pivot them or move them out into the work area.
GuestDresser(177).thumb.jpg.45389e75502e41f6ff26f6a923fea117.jpg
Once the operation is complete they pivot back into the parking space.

  • Author
  • Popular Post

I know it has been hot in many areas around the country. we are getting pretty "normal" around here. I am an early riser and take advantage of the cool night air with a shop fan blowing 60 degree air into my 75 degree shop for the first few hours of the day.
GuestDresser(178).thumb.jpg.462c3b38556d4237cdf3d154d4245cd7.jpg
After that I kick on the mini-split and rock on.
GuestDresser(179).thumb.jpg.fa0f7ce2c4bf81d6ebd709703556068d.jpg
I have passed the age where working in odd positions is practical. I will never again install my own car stereo; I just don't bend that way anymore . That being said I sometimes mis-fire on screw locations. A hardwood toothpick or medical Q-Tip dowel with a bit of CA glue solves that issue pretty quickly and I get to try to mess up again.
GuestDresser(180).thumb.jpg.7bac90d24dec8b22863a9823a732401b.jpg
Drawer boxes galore.
GuestDresser(181).thumb.jpg.fef3832bfe9aebfbb675c20c8e84ec3e.jpg
Alternate view of the same motley crew.
GuestDresser(182).thumb.jpg.4ece53c67058ecb85b758dba0206d31a.jpg
I like to have a couple of anchor screws for false fronts on drawers. To be honest the pull screws are probably adequate to hold them but I am a belt and suspenders guy. These will be 1/2" boxes with 1/2" faces so 1" screws are out. I will recess some 3/4" pan head screws about 1/8" and make that work. I tried a few different methods but, the age of this BB ply seems to make it want to tear out more than I am used to. I finally find success with a Forstner bit but, how to control the depth without just "eye balling" it?
GuestDresser(183).thumb.jpg.1e086401825a0216ce2de4fa9fc73781.jpg
I mill a block of 2x6 and rip off a chunk. I cut it to length and drill a 3/8" hole down the center.
GuestDresser(184).thumb.jpg.9c2add32f8aa07870e7b3e6cce049b72.jpg
I gently round the face and sand it super smooth to avoid burning when contact is made.
GuestDresser(185).thumb.jpg.cf356c341d74a45c905cca7288ac89c8.jpg
The block is of a length that will make me an 1/8" deep, flat bottom, 3/8" hole. These holes will come from inside the drawer toward the front to lock the false front in place.
GuestDresser(186).thumb.jpg.68ddec90020750f63bb76db18268e743.jpg
The Forstner gave me the cleanest hole edge of the methods I tried.
GuestDresser(187).thumb.jpg.cb17d4b1901e2f92ed810bf9a27bbb50.jpg
I just need to drill 14 holes and I can move on to resawing the false front material.

It looks like it would be difficult to see around the spacer to know exactly where you're drilling the hole.  But I'm guessing for this application you had a lot of leeway with the screw positions.

  • Author

@Mark J - Quite correct.  I make slightly oversized holes for the machine screws that attach the pulls. This wiggle room lets me set the false front final position.  Once in position and tightened down I use two screws as shown above at the outer areas of the drawer to lock the front in position.  Accuracy requirement of those screw hole positions is pretty loose.

  • Author
  • Popular Post

Finally. I never thought I would get those drawer boxes in.
GuestDresser(188).thumb.jpg.c541e2648fd7304558c8926ea10f2359.jpg
Ah, the Planer Sled . . . my dear old friend.
GuestDresser(191).thumb.jpg.465fd03a8fbc5ff51756190c90efd68b.jpg
Just as with any jointing operation, you want to try to split the difference of the irregularity. A smidge at the rear (the pic shows the deviation. The wedge is adjusted to take that out).
GuestDresser(189).thumb.jpg.31cf144257c298be396bc3ab9283f527.jpg
A smidge at the front.
GuestDresser(190).thumb.jpg.8f0890ac3ac2e0350f6d71a0885050aa.jpg
Find the greatest difference between your adjusted surface and a reference table.
GuestDresser(192).thumb.jpg.5cdd2dac2a5a9c92d6bfbb66bd2fdc28.jpg
Adjust your planer to just under that and take a swipe at it.
GuestDresser(193).thumb.jpg.55717b100a2a34f4fe0891cf604d902d.jpg
Got some of it but, not all.
GuestDresser(194).thumb.jpg.0722d5d5ad9279b50677b0159525ac83.jpg
There we go.
GuestDresser(195).thumb.jpg.485b82f7971760ec6d2311d7170cf38e.jpg
We've had these conversations before; the smaller your blank the less any irregularities cause you problems. I break these pieces down to about 1/2" to 3/4" oversize.
GuestDresser(196).thumb.jpg.28889a74f547f44d14cda3a336a9d2ee.jpg
Use the planer sled to make one face flat. Flip the pieces and use that milled face as the reference face against the planer table to make the opposite face parallel.
GuestDresser(197).thumb.jpg.a062108e9322c80d172d9b578ca99988.jpg
And you end up here. One blank will be the top center false front. The other pieces will be the middle and bottom false fronts. I am going to break for lunch and then come back and resaw these blanks. We'll see you after chow.

I love the sled. I use my neighbors 12" jointer. A 1949 model rebuilt. Other times if there is some straight grain I may rip and glue. The sled needs to go on the above list.

  • Author
  • Popular Post
On 7/5/2026 at 2:02 PM, curlyoak said:

The sled needs to go on the above list.

Seriously, other than waiting overnight for the glue to set I spent about 3-4 hours on the thing back in 2007.  It has paid dividends ever since ;-)

  • Author
  • Popular Post


So I got the walnut false fronts resawn.
GuestDresser(198).thumb.jpg.c81875a0dd61a1cf4d48f1c5c85057a1.jpg
I picked out a couple chunks of figured maple for the upper left and right false fronts. I choose the figure I am after and draw a center-line down the middle of that figure.
GuestDresser(199).thumb.jpg.6ea0518c8c0042e606186eb524bba21a.jpg
I then draw an offset from that center-line to give me the width I need plus some working room.
GuestDresser(200).thumb.jpg.50cb9681203264290aa196e329399cf0.jpg
It has the same feeling as "I told you so" but . . . I knew this was in there.
GuestDresser(201).thumb.jpg.d82e00fc0287c8a1e0d7aa0553ad9fe1.jpg

GuestDresser(202).thumb.jpg.bb41e652623ca250beec997a93b2443a.jpg

  • Author
  • Popular Post

Realized too late that I had a booger on the lens so there is a weird smudge in these pics. I overslept and so skipped breakfast. That means an early lunch so here is a small blurb of this morning's activities. The curly maple blanks are thicker than I need. I hate to just plane away or sand away material so I will resaw these.
GuestDresser(203).thumb.jpg.ccdbc26701acabd79bd40d43a2ab8fea.jpg
Yep, I can use these as veneers for something down the road.
GuestDresser(204).thumb.jpg.2b3083f5c07fdf89e9a732883b857e89.jpg
That leaves me the blanks as I've shown before.
GuestDresser(205).thumb.jpg.45855e80495e3cea0038b96fd2b4077e.jpg
This is what happens when you are stubborn about your design. I wanted what I wanted and so the proud legs act as the outer frame parts of the drawer carcass. I also wanted overlay drawers. The result is that there will be a gap relief at the post intersection . . .
GuestDresser(206).thumb.jpg.9dca19493af1df1e6616dc91c7bf5ecc.jpg
. . . and an overlay at the balance of the frame. Doable but, a bit squirrely.
GuestDresser(207).thumb.jpg.43f77b854830e680ce13321bf9546f2d.jpg
Here's another example of pulling your boards from your stock. I wanted the laid out section of grain for the top middle drawer. That means it doesn't come out of the blank square. I had to wait till I had the curly maple false front blanks till I could judge this very well. Now that I know what I want its off to the bandsaw.
GuestDresser(208).thumb.jpg.bed81911ecfe077c20b306e5696ce68f.jpg
Rip off an edge fat of the line.
GuestDresser(209).thumb.jpg.c1e36e335e94f5debc578dc16835adae.jpg
Joint that edge true.
GuestDresser(210).thumb.jpg.e27c7a764bffbeff88ee004c8a1ed4a0.jpg
Rip to final width.
GuestDresser(211).thumb.jpg.cc905537cb764d36cc0e6353f4766edb.jpg
And here is a rough view of the top row of drawers figure-wise.
GuestDresser(212).thumb.jpg.1dff2132a9ed3a6493753ec7a361267d.jpg
Time for some chow.

  • Author
  • Popular Post

I'm a dedicated blade to purpose kinda guy. Some are, some aren't, no wrong way
GuestDresser(213).thumb.jpg.dc19eb5535a4ae79fd748d9400aae41c.jpg
There will be anomalies in your material. Knowing where you are going with the blank can help you. I didn't care about this irregularity because I knew I was going to cut it off later on. I do mark them super-obviously to help me stay on track.
GuestDresser(214).thumb.jpg.6137b9a099d4e50659a7563017ef64ab.jpg
Another one.
GuestDresser(215).thumb.jpg.d824ef00c27405bdd492a3624a3c2bbc.jpg
I try to always de-energize my meat-eating machines before getting my pinkies close to the cutters. Every now and then I will finish setting up a blade or a bit and go over to the power feed to re-energize only to realize the system has been hot the whole time. After I change my shorts I move on.
GuestDresser(216).thumb.jpg.e84b8c0ab4d5b1703b0a60cfc16dd2d2.jpg
My Muscle Chuck started to slip. I went through the troubleshooting exercises to no avail. Muscle Chuck sent me a new one, I just haven't installed it yet. It was rock solid for two years but then started to slip no matter what I did. I will report back after I install the replacement.
GuestDresser(217).thumb.jpg.862cd08a7b2ba52849de0233e9298685.jpg
One of the great things about documenting a build journal is that I can go back and remember how I did something.
GRST(46).thumb.jpg.23cd6e001b12b995abe93551829c2cc4.jpg
I was wondering what bit I used for that profile. I didn't document a lot on the side tables because I never dreamed I would be building a dresser to match
GuestDresser(218).thumb.jpg.13745d9dcc850d6e8c606423207c44f9.jpg
At any rate I found the bit in an old thread and matched the profile.
GuestDresser(219).thumb.jpg.ef80dad3986e5fb5d9788062badba441.jpg
I find the shop vac to do a better job at the fence than the DC. I routinely drag the hose over, weigh it down with a couple of tube socks loaded with marbles and go at it.
GuestDresser(220).thumb.jpg.125a45b190916b200ca095d9b385b929.jpg
I use a push-plate (maybe I made that up) to act as a backer board for cross cut profiling where tear out can be a problem.
GuestDresser(221).thumb.jpg.73c759d462ef6f2aa37db634ed26d641.jpg
I use the plate till it gets eaten up on all four corners. I cut it down to reveal new corners but . . . after a while . . .
GuestDresser(222).thumb.jpg.627c21c684530c003efca73b3d0d3ee4.jpg
When it is dead I just cut a few more plates from the "found at the curb" particle board I keep around.
GuestDresser(223).thumb.jpg.7f5f3cc841b286de3f6d654566d84968.jpg
Once all edges are profiles things start to look a little more civilized.
GuestDresser(224).thumb.jpg.9f898fae4e7e789de9350a1dcf477408.jpg
This is just off the machine so there will be some more prep before I call it "done".

  • Author
  • Popular Post

Time for some pulls. I want these to have a reasonable amount of face surface so that they show off the tiger maple.
GuestDresser(225).thumb.jpg.bb7b43f7859bcd60d6dfcb11c2296f6b.jpg
The tiger maple drawer fronts will have walnut pulls and I find an odd-ball piece of scrap in the bin that will yield the two pulls I need.
GuestDresser(226).thumb.jpg.e7d8c889b6a4494fd9dacb336876dd4a.jpg
I end up with these five maple pull and two walnut pull blanks.
GuestDresser(227).thumb.jpg.4ec83398a82b188cc120209e5cf2b617.jpg
I drill the holes for the inserts.
GuestDresser(228).thumb.jpg.222202b66b8de9c442acd53acf58ae33.jpg
Its a process . . .
GuestDresser(229).thumb.jpg.1c7338455769bd62fd6ab59383d5a4c6.jpg
I seem to have missed the router table cove process but it is pretty obvious.
GuestDresser(230).thumb.jpg.32c553285b9d7fe6c4b93095b772be67.jpg
I swear I have been using the same "toilet ring" of wax for a decade to lube screws and such. I put a dab of it in the holes to make the inserts drive in easier. The hole is drilled to the diameter of the insert shaft to prevent splitting.
GuestDresser(231).thumb.jpg.97264f1f135f385994ea3c8b441cd054.jpg
I do this at the drill press to make sure things go in perpendicular and true.
GuestDresser(232).thumb.jpg.030f7b2c36e67581da2dc8df923557b5.jpg
I use an insert tool from . . . Oh, here it is . . . E-Z-LOK.
GuestDresser(233).thumb.jpg.8c9282566e87aaf0765c81febc4e2eb4.jpg
I open the top of the DP and turn the drive sheave by hand to drive in the inserts. This take a little more time but I find well placed inserts to beat misaligned inserts every time ;-)
GuestDresser(234).thumb.jpg.bd91996ebe5ab74f60897e991bbcda99.jpg
And there we go so I have to go oven bake some thick-cut bacon now in anticipation of dinner tonight.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.